SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 306.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: zeii on April 23, 2018, 02:54:02 PM

Quote from: doktor83 on April 23, 2018, 02:19:52 PM

Quote from: zeii on April 23, 2018, 12:37:40 PM

Doctor,
Could you change the id of gpu to match with GPUZ.
my rig has 12 gpu and i'm very confuse, cant find gpu which has low hashrate.
thank you.

Ok, suppose the order is same as in GPU-z. and card 4 has low hashrate. What now ? Cheesy

I don't really understand why is the order important. You can move mem clock + 1 in OverdriveNtool , press H in SRBminer and see which cards mem clock raised by 1

Now you found which card is it.

I have 6 rig with 12gpu and i try to make a best hash rate.
if i know which card has low hashrate, i can directly adjust them because OverdriveNtool has a same gpu id as GPUZ.

I confuse because of more card, haha. Grin

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: zvijerka on April 23, 2018, 03:09:35 PM

where do I put my worker name for nanopool?

Im probably blind, but i cant find it...

wallet field... ADDRESS.WORKER

zvijerka

newbie

Activity: 4

Merit: 0

where do I put my worker name for nanopool?

Im probably blind, but i cant find it...

zeii

newbie

Activity: 41

Merit: 0

Quote from: doktor83 on April 23, 2018, 02:19:52 PM

Quote from: zeii on April 23, 2018, 12:37:40 PM

Doctor,
Could you change the id of gpu to match with GPUZ.
my rig has 12 gpu and i'm very confuse, cant find gpu which has low hashrate.
thank you.

Ok, suppose the order is same as in GPU-z. and card 4 has low hashrate. What now ? Cheesy

I don't really understand why is the order important. You can move mem clock + 1 in OverdriveNtool , press H in SRBminer and see which cards mem clock raised by 1

Now you found which card is it.

I have 6 rig with 12gpu and i try to make a best hash rate.
if i know which card has low hashrate, i can directly adjust them because OverdriveNtool has a same gpu id as GPUZ.

I confuse because of more card, haha. Grin

twotwosix

newbie

Activity: 118

Merit: 0

Quote from: zloy_hulk on April 23, 2018, 02:17:07 PM

Quote from: twotwosix on April 23, 2018, 02:09:43 PM

Someone with sapphire rx580 nitro 8gb hynix memory can reach 1000+mh/s??

of course, anyone can! 1000 mh))

even with 4GB some of my cards can. And now there are a lot of variants of cryptonight algo with very different rates, what algo exactly do you mean?
for example, cryptonight-ipbc my 580 8gb can do 2200 h/s.
at heavy it can do 1150 h/s, but 580 4gb can only 750h/s.

Quote from: zloy_hulk on April 23, 2018, 02:17:07 PM

Quote from: twotwosix on April 23, 2018, 02:09:43 PM

Someone with sapphire rx580 nitro 8gb hynix memory can reach 1000+mh/s??

of course, anyone can! 1000 mh))

even with 4GB some of my cards can. And now there are a lot of variants of cryptonight algo with very different rates, what algo exactly do you mean?
for example, cryptonight-ipbc my 580 8gb can do 2200 h/s.
at heavy it can do 1150 h/s, but 580 4gb can only 750h/s.

Im mining monero (cryptonightv7), with rx580 8gb pulse, hynix memory reach easy with same memory straps +1000mh/s, but with rx580 8gb nitro i cant

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: zeii on April 23, 2018, 12:37:40 PM

Doctor,
Could you change the id of gpu to match with GPUZ.
my rig has 12 gpu and i'm very confuse, cant find gpu which has low hashrate.
thank you.

Ok, suppose the order is same as in GPU-z. and card 4 has low hashrate. What now ? Cheesy

I don't really understand why is the order important. You can move mem clock + 1 in OverdriveNtool , press H in SRBminer and see which cards mem clock raised by 1

Now you found which card is it.

zloy_hulk

newbie

Activity: 40

Merit: 0

Quote from: twotwosix on April 23, 2018, 02:09:43 PM

Someone with sapphire rx580 nitro 8gb hynix memory can reach 1000+mh/s??

of course, anyone can! 1000 mh))

even with 4GB some of my cards can. And now there are a lot of variants of cryptonight algo with very different rates, what algo exactly do you mean?
for example, cryptonight-ipbc my 580 8gb can do 2200 h/s.
at heavy it can do 1150 h/s, but 580 4gb can only 750h/s.

twotwosix

newbie

Activity: 118

Merit: 0

Someone with sapphire rx580 nitro 8gb hynix memory can reach 1000+mh/s??

zloy_hulk

newbie

Activity: 40

Merit: 0

Quote from: doktor83 on April 23, 2018, 08:48:29 AM

Quote from: zloy_hulk on April 23, 2018, 06:53:06 AM

Hello!
Can you help me please with such problem - "your ip is banned" - i saw this message many times on different rigs. What it means actually?

Which version are you using?
From v1.4.6 there is duplicate share sending protection, which can cause ip ban too.

I'm using v1.4.6
Strange, one of my farms is working well, other 3 rigs have these errors. OC and cards are almost the same everywere. Different locations only.

zeii

newbie

Activity: 41

Merit: 0

Doctor,
Could you change the id of gpu to match with GPUZ.
my rig has 12 gpu and i'm very confuse, cant find gpu which has low hashrate.
thank you.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: UnclWish on April 23, 2018, 10:11:44 AM

Quote from: doktor83 on April 23, 2018, 06:16:42 AM

Quote from: UnclWish on April 22, 2018, 04:27:58 PM

doctor, did you plan to add adl support for Pitcairn like GCN1.0 GPU's? Did you plan to add clock, voltage, fans and pw controls?

Often recieve rejected shares "Job not found" on nicehash cryptonightV7.

Not at the moment, OverdriveNEXT supported cards only. That's a whole bunch of cards starting from 290 to Vega.

Oh, ok. What about adding clock, voltage, fans and pw controls?

And another one: i think that's good to add parameter for minrigspeed. If speed 5 minutess less than that parameter - restart rig.

In 1.4.7 how to set target and shutdown temperatures individual for each card?

To be honest i implemented clocks and voltage settings but its not working as it should, i need more time to figure out what's wrong.
By pw control you mean power limit setting ?

not a bad idea for the restart if speed < 5 minutes.

target and shutdown temperatures are global , not per card. Shutdown temperature shuts down rig, if the entered temperature is reached.

locbet

newbie

Activity: 42

Merit: 0

Quote from: treanski on April 23, 2018, 11:29:34 AM

Quote from: locbet on April 23, 2018, 11:27:58 AM

Very bad: Vega 64 Cryptonight V7

[2018-04-23 23:25:53] Pool accepted result 0x000059B4
[2018-04-23 23:25:55] Pool accepted result 0x000044B1
[2018-04-23 23:25:55] Pool difficulty: 50625
[2018-04-23 23:25:55] Pool sent a new job (ID: 119620357058010)
[2018-04-23 23:25:58] Pool accepted result 0x0000EC14
[2018-04-23 23:26:03] Pool sent a new job (ID: 133028621855191)
[2018-04-23 23:26:11] GPU0: 1494.0 H/S [T: 51c, RPM: 3446, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU1: 1493.0 H/S [T: 51c, RPM: 3772, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU2: 1498.0 H/S [T: 48c, RPM: 3253, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU3: 1493.0 H/S [T: 47c, RPM: 3544, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU4: 1492.0 H/S [T: 47c, RPM: 3535, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU5: 1484.0 H/S [T: 48c, RPM: 3373, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] Total: 8954.0 H/S
[2018-04-23 23:26:12] Pool sent a new job (ID: 264038743241690)
[2018-04-23 23:26:13] Pool accepted result 0x0000CEB1
[2018-04-23 23:26:16] Pool accepted result 0x000102BE
[2018-04-23 23:26:21] Pool accepted result 0x0000B950
[2018-04-23 23:26:24] Pool difficulty: 75939

its not the miner your config/ clocking / volting settings sucks for 100%

Using OverDriveNTool:

[Profile_0]
Name=Vega64
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;925
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;905
Fan_Min=3000
Fan_Max=4900
Fan_Target=65
Fan_Acoustic=1500
Power_Temp=70
Power_Target=-25

And PowerPlay:

_1100MHz_HBM_905mv
Wrong Huh

Because using Cast XMR -->2055H/s

treanski

full member

Activity: 364

Merit: 106

ONe Social Network.

Quote from: locbet on April 23, 2018, 11:27:58 AM

Very bad: Vega 64 Cryptonight V7

[2018-04-23 23:25:53] Pool accepted result 0x000059B4
[2018-04-23 23:25:55] Pool accepted result 0x000044B1
[2018-04-23 23:25:55] Pool difficulty: 50625
[2018-04-23 23:25:55] Pool sent a new job (ID: 119620357058010)
[2018-04-23 23:25:58] Pool accepted result 0x0000EC14
[2018-04-23 23:26:03] Pool sent a new job (ID: 133028621855191)
[2018-04-23 23:26:11] GPU0: 1494.0 H/S [T: 51c, RPM: 3446, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU1: 1493.0 H/S [T: 51c, RPM: 3772, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU2: 1498.0 H/S [T: 48c, RPM: 3253, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU3: 1493.0 H/S [T: 47c, RPM: 3544, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU4: 1492.0 H/S [T: 47c, RPM: 3535, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU5: 1484.0 H/S [T: 48c, RPM: 3373, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] Total: 8954.0 H/S
[2018-04-23 23:26:12] Pool sent a new job (ID: 264038743241690)
[2018-04-23 23:26:13] Pool accepted result 0x0000CEB1
[2018-04-23 23:26:16] Pool accepted result 0x000102BE
[2018-04-23 23:26:21] Pool accepted result 0x0000B950
[2018-04-23 23:26:24] Pool difficulty: 75939

its not the miner your config/ clocking / volting settings sucks for 100%

locbet

newbie

Activity: 42

Merit: 0

Very bad: Vega 64 Cryptonight V7

[2018-04-23 23:25:53] Pool accepted result 0x000059B4
[2018-04-23 23:25:55] Pool accepted result 0x000044B1
[2018-04-23 23:25:55] Pool difficulty: 50625
[2018-04-23 23:25:55] Pool sent a new job (ID: 119620357058010)
[2018-04-23 23:25:58] Pool accepted result 0x0000EC14
[2018-04-23 23:26:03] Pool sent a new job (ID: 133028621855191)
[2018-04-23 23:26:11] GPU0: 1494.0 H/S [T: 51c, RPM: 3446, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU1: 1493.0 H/S [T: 51c, RPM: 3772, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU2: 1498.0 H/S [T: 48c, RPM: 3253, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU3: 1493.0 H/S [T: 47c, RPM: 3544, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU4: 1492.0 H/S [T: 47c, RPM: 3535, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] GPU5: 1484.0 H/S [T: 48c, RPM: 3373, CC: 1408 MHz, MC: 1100 MHz]
[2018-04-23 23:26:11] Total: 8954.0 H/S
[2018-04-23 23:26:12] Pool sent a new job (ID: 264038743241690)
[2018-04-23 23:26:13] Pool accepted result 0x0000CEB1
[2018-04-23 23:26:16] Pool accepted result 0x000102BE
[2018-04-23 23:26:21] Pool accepted result 0x0000B950
[2018-04-23 23:26:24] Pool difficulty: 75939

cryptosize

sr. member

Activity: 1666

Merit: 310

Quote from: doktor83 on April 23, 2018, 06:13:23 AM

1. No, and won't do it. Why ? As soon as i release it, people will remove devfee, and upload that version to the forum and everywhere else. If that happens, i won't work on the miner anymore. Why ? Look at SRBPolaris, it's free, you know how much donation i got for it ? About 150$ maybe 200$. But of course lot of people use it.

2. Claymore is a magician, he probably worked at AMD and knows all the good insider stuff

I fully understand your concerns and I'll gladly pay a devfee, as long as the miner works properly (full hashrate, low intensity) and it's supported with new algos for a long time.

As I said, my concern with closed-source miners is that we might end up in a Claymore v9.7 situation, where v7 CN algo is not supported...

And yeah, Claymore is a magician. Too bad he doesn't want to release the source code, even though people have offered him BTC/ETH donations (not everyone is a cheapskate

).

cryptosize

sr. member

Activity: 1666

Merit: 310

Quote from: deathlire on April 22, 2018, 11:50:52 PM

Quote from: cryptosize on April 22, 2018, 07:20:19 PM

Quote from: deathlire on April 22, 2018, 02:37:26 PM

1.) Nope, and don't think he's going to, but never know later on.

Far as claymore 9.7 goes.. probably some shady coding he doesn't want anyone to know, or just wants to keep it away from everyone for fee's possibly, never know.

2.) I did notice on 14.4 drivers that my vram was more around 1GB and switching over to 15.7.1 it has 2047MB for some reason detected on all the other miners, but claymore did find 2047 on both drivers..
so determining how it gets the m1 and m2 should be an easy fix, I know for a fact I only have 512MB dedicated, which is also shown in m2.. I'll have a look at which way xmrig/stak is polling the memory. iirc this has been an issue with those for quite awhile.. I've never been able to get any miner to work without dying except for claymore on 15.7.1, and believe me I am trying to find a workaround that doesn't involve switching and mangling drivers around to make something work.

How much memory does 14.4 show you compared to 15.7.1?

1) The thing is, Claymore recently removed the devfee from his miner (v11.3). Apparently he's leaving the scene, which means no more support.

It sucks that he doesn't want to release the source code...

2) 14.4 detects the entire memory, while 15.7.1 says only 384MB of VRAM is available.

I really want to know how Claymore v9.7 detects the entire memory with 15.7.1 drivers... yet another secret hiding in the closed-source binary.

Yeah I did notice he took out the fee's at least for 3GB or under cards i think..

But how much memory do you have exactly in total when it's correct? Then I might be able to finally dig into it and see if i can get something going.
Since mines actually doing the opposite for some reason.. on 14.4 it's showing 1024 iirc, and 2047 for 15.7.1...not sure why it isn't 2048 though..

766MB IIRC.

I have a discrete GPU, so I'm not sure about your APU.

Also, Claymore v9.7 is the only miner that maxes out my GPU utilization/D3D usage (99-100%) in HWiNFO64, without spilling data to the main/CPU RAM (which drops hashrate a lot because of PCI-e bottlenecks).

Do you know if it's possible to program VLIW GPUs in pure assembly? IIRC, GCN GPUs support shader intrinsics, which is kinda like console/code to the metal programming:

https://www.gamersnexus.net/guides/2646-shader-intrinsic-functions-bypass-abstraction-layers

treanski

full member

Activity: 364

Merit: 106

ONe Social Network.

1.47

4 Vega 56 @ IPBC

[2018-04-23 18:19:11] GPU0: 3935.0 H/S [T: 60c, RPM: 3083, CC: 1508 MHz, MC: 950 MHz]
[2018-04-23 18:19:11] GPU1: 3805.0 H/S [T: 60c, RPM: 1386, CC: 1528 MHz, MC: 950 MHz]
[2018-04-23 18:19:11] GPU2: 3818.0 H/S [T: 60c, RPM: 1665, CC: 1528 MHz, MC: 950 MHz]
[2018-04-23 18:19:11] GPU3: 3918.0 H/S [T: 65c, RPM: 3062, CC: 1508 MHz, MC: 950 MHz]
[2018-04-23 18:19:11] Total: 15476.0 H/S

not bad

arvonceda

newbie

Activity: 66

Merit: 0

how to auto restart SRBMiner
example every 2 hours SRBMiner auto reconnect to pool, and back to the begin
(if on claymore we use command -r 120)

ty sir...

locbet

newbie

Activity: 42

Merit: 0

Quote from: doktor83 on April 23, 2018, 08:49:39 AM

Quote from: liomojo1 on April 23, 2018, 06:44:33 AM

I DO RECOMMEND this miner , cause I was using cast-xmr and it was showing better hashrate , but my average on the pool was low 17500-18000.
Then i started using your miner and it is showing less hashrate may be 5% , BUT my average hashrate started growing and now after 24 hours it is 19955 and is stable . Keep the good work boys!!!!!!!!!!!!! And guys don`t get fooled by the better hash of other miners it is not real obviosly!!!

Thank you man, really appreciate the good words !!

SRBMiner support json report stats. Please answer because i'm want Development UI Control for SRBMiner

Thanks

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: doktor83 on April 23, 2018, 06:16:42 AM

Quote from: UnclWish on April 22, 2018, 04:27:58 PM

doctor, did you plan to add adl support for Pitcairn like GCN1.0 GPU's? Did you plan to add clock, voltage, fans and pw controls?

Often recieve rejected shares "Job not found" on nicehash cryptonightV7.

Not at the moment, OverdriveNEXT supported cards only. That's a whole bunch of cards starting from 290 to Vega.

Oh, ok. What about adding clock, voltage, fans and pw controls?

And another one: i think that's good to add parameter for minrigspeed. If speed 5 minutess less than that parameter - restart rig.

In 1.4.7 how to set target and shutdown temperatures individual for each card?

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 306. (Read 237300 times)