I am a greedy ba*tard. Why I cant use this command in .bat file anymore?
It was taken out in the past few versions.. Is 1 minute every couple hours really that bad?
Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 308. (Read 237300 times)
April 23, 2018, 04:23:31 AM
It was taken out in the past few versions.. Is 1 minute every couple hours really that bad?
April 23, 2018, 04:20:04 AM
Please fix the dropping hash on CN-heavy...you said it's normal in the past days, but it shouldn't be, it doesn't happen immediately, and it can even sustain the high hash for a few good hours, so this must be a bug.
Yeah i tested this with watchdogs off using castxmr(smooth mining so far), will try with Srbminer later when im back at home. April 23, 2018, 04:12:49 AM
Guys, can anyone help with hashrate on 580 8 gb
Was getting 1050 on v7 with standart settings intensity 50
But when i try to use same settings on heavy algo, getting erros and gpu crashing
They start working only with 25 intens and give 650 hash only per card
Was getting 1050 on v7 with standart settings intensity 50
But when i try to use same settings on heavy algo, getting erros and gpu crashing
They start working only with 25 intens and give 650 hash only per card
April 23, 2018, 03:44:06 AM
Please fix the dropping hash on CN-heavy...you said it's normal in the past days, but it shouldn't be, it doesn't happen immediately, and it can even sustain the high hash for a few good hours, so this must be a bug.
Also, add a speed check in the watchdog, if less than X speed set, restart miner or reboot (use scrypt).
Also, add a speed check in the watchdog, if less than X speed set, restart miner or reboot (use scrypt).
April 23, 2018, 03:43:35 AM
does any one have a amd 390? im mining haven and im seeing around 675-690hashs which seems low, my 580 with 2 threads is getting 1000-1100 on it.
maybe i don't have the config set up right for it.
usely the 390 beats the 580 in everything and usely comes really close too the 580 in normal crytonight. everything else the 390 edges it out.
maybe i don't have the config set up right for it.
usely the 390 beats the 580 in everything and usely comes really close too the 580 in normal crytonight. everything else the 390 edges it out.
April 23, 2018, 03:39:56 AM
I am a greedy ba*tard. Why I cant use this command in .bat file anymore?
It was taken out in the past few versions.. Is 1 minute every couple hours really that bad?
April 23, 2018, 03:30:03 AM
I am a greedy ba*tard. Why I cant use this command in .bat file anymore?
It was taken out in the past few versions.. Is 1 minute every couple hours really that bad?
April 23, 2018, 03:24:57 AM
I am a greedy ba*tard. Why I cant use this command in .bat file anymore?
He removed it since 1.4.4. Btw Guys has anyone noticed that hash rates tend to drop when mining CN-heavy with Watchdogs(Castxmr/SRBminer) on blockchain drivers?
April 23, 2018, 03:18:38 AM
If I reset the clocks using OverdriveNTool and reapply them back - the miner doesn't get the updated memory clock and mines with the stock speed. Only a full Windows restart works. ETH mining doesn't have this problem, haven't tried other CN miners.
April 23, 2018, 03:09:23 AM
Hi, use pre-GCN cards 5870 gpu0 65% use gpu1 100% use Because it happens?
https://pasteboard.co/HhTRNaj.png
https://pasteboard.co/HhTRNaj.png
Settings the same for both? and not using a crossfire situation?
Settings same *2 not use crossfire
Are you using first gpu to do anything graphically intensive like watching video's or webpages, or games?
Also have you tried just using only that card to mine and see if it still stays around that hash rate by itself?
It could be several factors.. perhaps even the memory or just plain old "silicon lottery" losing on the first card..
Maybe Dok can help with this one though.
April 23, 2018, 03:05:48 AM
doktor83,
I've been using your miner for a while now and i really enjoy using it. But recently my hashrate is going down from 5200 to 4900 after like every 2 days or something. So when that happens, i have to restart my rig and after that it becomes normal. What do you think about this one? The version was 1.3.0.
I've been using your miner for a while now and i really enjoy using it. But recently my hashrate is going down from 5200 to 4900 after like every 2 days or something. So when that happens, i have to restart my rig and after that it becomes normal. What do you think about this one? The version was 1.3.0.
April 23, 2018, 02:58:56 AM
I am a greedy ba*tard. Why I cant use this command in .bat file anymore?
It was taken out in the past few versions.. Is 1 minute every couple hours really that bad?
April 23, 2018, 02:50:42 AM
I am a greedy ba*tard. Why I cant use this command in .bat file anymore?
April 23, 2018, 01:52:58 AM
Hi, use pre-GCN cards 5870 gpu0 65% use gpu1 100% use Because it happens?
https://pasteboard.co/HhTRNaj.png
https://pasteboard.co/HhTRNaj.png
Settings the same for both? and not using a crossfire situation?
Settings same *2 not use crossfire
April 23, 2018, 12:50:56 AM
Hi, use pre-GCN cards 5870 gpu0 65% use gpu1 100% use Because it happens?
https://pasteboard.co/HhTRNaj.png
https://pasteboard.co/HhTRNaj.png
Settings the same for both? and not using a crossfire situation?
April 23, 2018, 12:43:05 AM
Hi, use pre-GCN cards 5870 gpu0 65% use gpu1 100% use Because it happens?
https://pasteboard.co/HhTRNaj.png
https://pasteboard.co/HhTRNaj.png
April 22, 2018, 11:50:52 PM
1.) Nope, and don't think he's going to, but never know later on.
Far as claymore 9.7 goes.. probably some shady coding he doesn't want anyone to know, or just wants to keep it away from everyone for fee's possibly, never know.
2.) I did notice on 14.4 drivers that my vram was more around 1GB and switching over to 15.7.1 it has 2047MB for some reason detected on all the other miners, but claymore did find 2047 on both drivers..
so determining how it gets the m1 and m2 should be an easy fix, I know for a fact I only have 512MB dedicated, which is also shown in m2.. I'll have a look at which way xmrig/stak is polling the memory. iirc this has been an issue with those for quite awhile.. I've never been able to get any miner to work without dying except for claymore on 15.7.1, and believe me I am trying to find a workaround that doesn't involve switching and mangling drivers around to make something work.
How much memory does 14.4 show you compared to 15.7.1?
1) The thing is, Claymore recently removed the devfee from his miner (v11.3). Apparently he's leaving the scene, which means no more support.Far as claymore 9.7 goes.. probably some shady coding he doesn't want anyone to know, or just wants to keep it away from everyone for fee's possibly, never know.
2.) I did notice on 14.4 drivers that my vram was more around 1GB and switching over to 15.7.1 it has 2047MB for some reason detected on all the other miners, but claymore did find 2047 on both drivers..
so determining how it gets the m1 and m2 should be an easy fix, I know for a fact I only have 512MB dedicated, which is also shown in m2.. I'll have a look at which way xmrig/stak is polling the memory. iirc this has been an issue with those for quite awhile.. I've never been able to get any miner to work without dying except for claymore on 15.7.1, and believe me I am trying to find a workaround that doesn't involve switching and mangling drivers around to make something work.
How much memory does 14.4 show you compared to 15.7.1?
It sucks that he doesn't want to release the source code...
2) 14.4 detects the entire memory, while 15.7.1 says only 384MB of VRAM is available.
I really want to know how Claymore v9.7 detects the entire memory with 15.7.1 drivers... yet another secret hiding in the closed-source binary.
Yeah I did notice he took out the fee's at least for 3GB or under cards i think..
But how much memory do you have exactly in total when it's correct? Then I might be able to finally dig into it and see if i can get something going.
Since mines actually doing the opposite for some reason.. on 14.4 it's showing 1024 iirc, and 2047 for 15.7.1...not sure why it isn't 2048 though..
April 22, 2018, 11:06:09 PM
SRBMiner has an stats support in JSON format 
April 22, 2018, 07:20:19 PM
1.) Nope, and don't think he's going to, but never know later on.
Far as claymore 9.7 goes.. probably some shady coding he doesn't want anyone to know, or just wants to keep it away from everyone for fee's possibly, never know.
2.) I did notice on 14.4 drivers that my vram was more around 1GB and switching over to 15.7.1 it has 2047MB for some reason detected on all the other miners, but claymore did find 2047 on both drivers..
so determining how it gets the m1 and m2 should be an easy fix, I know for a fact I only have 512MB dedicated, which is also shown in m2.. I'll have a look at which way xmrig/stak is polling the memory. iirc this has been an issue with those for quite awhile.. I've never been able to get any miner to work without dying except for claymore on 15.7.1, and believe me I am trying to find a workaround that doesn't involve switching and mangling drivers around to make something work.
How much memory does 14.4 show you compared to 15.7.1?
1) The thing is, Claymore recently removed the devfee from his miner (v11.3). Apparently he's leaving the scene, which means no more support.Far as claymore 9.7 goes.. probably some shady coding he doesn't want anyone to know, or just wants to keep it away from everyone for fee's possibly, never know.
2.) I did notice on 14.4 drivers that my vram was more around 1GB and switching over to 15.7.1 it has 2047MB for some reason detected on all the other miners, but claymore did find 2047 on both drivers..
so determining how it gets the m1 and m2 should be an easy fix, I know for a fact I only have 512MB dedicated, which is also shown in m2.. I'll have a look at which way xmrig/stak is polling the memory. iirc this has been an issue with those for quite awhile.. I've never been able to get any miner to work without dying except for claymore on 15.7.1, and believe me I am trying to find a workaround that doesn't involve switching and mangling drivers around to make something work.
How much memory does 14.4 show you compared to 15.7.1?
It sucks that he doesn't want to release the source code...
2) 14.4 detects the entire memory, while 15.7.1 says only 384MB of VRAM is available.
I really want to know how Claymore v9.7 detects the entire memory with 15.7.1 drivers... yet another secret hiding in the closed-source binary.
April 22, 2018, 06:35:46 PM
I found a pretty good starting tutorial video on youtube if anyone is interested.
https://www.youtube.com/watch?v=Y51xWpzFsPU
https://www.youtube.com/watch?v=Y51xWpzFsPU
Jump to: