Author

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 339. (Read 237263 times)

newbie
Activity: 8
Merit: 0
I use SRBMiner Cryptonight AMD GPU Miner V1.3.1 for RX380
but It error CPU does not support ASE-NI.
I mining HAVEN COIN.

can You help me?

Its not an error, its just a notice. Smiley


But after 15s this Tool close. It can not start run.
full member
Activity: 714
Merit: 104
How to set RPM to % for fans?
I am also wait whis feature, but it seems that it is not realized yet.
And with coming bugs in new version i think better i stay on 1.2.5 it working without errors for me
hero member
Activity: 2548
Merit: 626
I use SRBMiner Cryptonight AMD GPU Miner V1.3.1 for RX380
but It error CPU does not support ASE-NI.
I mining HAVEN COIN.

can You help me?

Its not an error, its just a notice. Smiley
hero member
Activity: 2548
Merit: 626
Any news on my devfee problem ?
And on a version with command line parameters and not in config file ?
Thanks

working on devfee and logging, command line parameters not important right now.
Elaborate, why isn't config file ok for you?

To configure new coin with your miner, we are forced to do it on each rig. Very time consuming when you have to do it on few rigs.
With miner having full command line parameters, i've just to configure it in my tool and miner starts/restarts without having remote session on rig.

SRBMiner-CN.exe -c anycoinconfig.txt is working, so just make a separate .bat and conf file for every coin.
I can add cmd line params later , when the important stuff is done.
newbie
Activity: 8
Merit: 0
I use SRBMiner Cryptonight AMD GPU Miner V1.3.1 for RX380
but It error CPU does not support ASE-NI.
I mining HAVEN COIN.

can You help me?
sr. member
Activity: 661
Merit: 250
Any news on my devfee problem ?
And on a version with command line parameters and not in config file ?
Thanks

working on devfee and logging, command line parameters not important right now.
Elaborate, why isn't config file ok for you?

To configure new coin with your miner, we are forced to do it on each rig. Very time consuming when you have to do it on few rigs.
With miner having full command line parameters, i've just to configure it in my tool and miner starts/restarts without having remote session on rig.
newbie
Activity: 21
Merit: 0
Hello everyone!
Thanks to the dev for the great job.

I have some question about Haven mining (cn heavy).

I run a 6 gpu (Vega 64 8mb) rig with srbminer to mine haven.
It seems that my hashrate is not optimal comparing to others reporting 1500+ h/s using Vega 64 or 54 with xmr-stak.

I only get around 950h/s per gpu (max 1400 but drowning quickly)...
I also get some miner crash quite often.
I wonder if i do something wrong with the settings or if it is a miner/gpu limits...

The best hashrate i get comes with this settings.
-algo: heavy
-pool use ssl/tls: false
-target temperature: 0
-"intensity 55"
-i use cryptoknight pool (luckypool gave me the same result).

gpu config
-Intensity 150 for each gpu, double thread "true"

-Virtual memory on my computer 30000-60000
-On afterburner: coreclock 950, memory 1020

I get around 900-950 h/s per card with thoses settings (and was the best i could hit), wich seems to be low according to others Smiley

Does anyone have any idea of what i did wrong, or if it is srbminer limits?

Thanks a lot!
newbie
Activity: 1
Merit: 0
Hey, someone asked before but it may have been missed.

Will there be a Linux version?  Grin
hero member
Activity: 2548
Merit: 626
Any news on my devfee problem ?
And on a version with command line parameters and not in config file ?
Thanks

working on devfee and logging, command line parameters not important right now.
Elaborate, why isn't config file ok for you?
sr. member
Activity: 661
Merit: 250
Any news on my devfee problem ?
And on a version with command line parameters and not in config file ?
Thanks
hero member
Activity: 2548
Merit: 626
@doktor

Why is it making a new srb file everytime if u only change the intensity?
Cause the name isn't changing.
Just curious

thanks for pointing this out, i was testing and it left that way.. kernel building should be faster in next version Smiley
newbie
Activity: 14
Merit: 0
Hello
I'm using 2 old RADEON 6950 on 2 different computer. It's the 1st miner could hash from the Monero V7 fork and I'm happy to discover this miner!  Smiley

I have a hashrate problem, I can't reach better than 145 H / s. Before the Fork I was doing 350 H / s with this card with other miner.

I've tried the automatic intensity, and a lot of between 0 - 300 i've got the max with intensity 15
Is this card compatible with this miner ? Already it is stable and there is HASHRATE. Which is not the case with any other minor i've tried ...

I hope you could help me with my 2 old radeon card.

I'm Using Windows 8.1 X64
The last WHQL Driver for this card "15.7.1"

There is some recommendation about the driver revision or other tips to Hash more with that card ?

Thank you for your work
hero member
Activity: 2548
Merit: 626
is CryptoNightLite V1 (turttle coin) supported? i see rejected shares if i choose LITEV7




{
"cryptonight_type" : "litev7",
"intensity" : 0,
"double_threads" : true,
"pool" : "eu.turtlepool.space:3333",
"wallet" : "TRTLxxx",
"password" : "x",
"location" : "europe",
"log_file" : ""
}
newbie
Activity: 78
Merit: 0
is CryptoNightLite V1 (turttle coin) supported? i see rejected shares if i choose LITEV7
hero member
Activity: 2548
Merit: 626
Another bug?

Miner issues this
[2018-04-10 19:00:53] Warning: thread1 hashing speed is 0 (1)
[2018-04-10 19:00:53] Warning: thread2 hashing speed is 0 (1)


GPU is MSI RX 574 running at 1100/2050 and gpu_conf intensity set to 0  for auto-selection (56).
The computer freezes and reboot is required. 
Happens on two separate rigs after about one day of mining..


this is not a bug, when you use double_threads you use 2 threads on the same gpu (thread1, thread2).
This is like the message says a warning that those threads have speed 0, so they are not hashing. Lower your intensity, put it on 55 and try how that works for you.
full member
Activity: 279
Merit: 104
Another bug?

Miner issues this
[2018-04-10 19:00:53] Warning: thread1 hashing speed is 0 (1)
[2018-04-10 19:00:53] Warning: thread2 hashing speed is 0 (1)


GPU is MSI RX 574 running at 1100/2050 and gpu_conf intensity set to 0  for auto-selection (56).
The computer freezes and reboot is required. 
Happens on two separate rigs after about one day of mining..
full member
Activity: 279
Merit: 104
Is there a bug in the reporting of GPU temp and RPM?
Always the same values for GPU 0 and 1  and 2 and 3?
Both my 4-GPU rigs exhibit this behaviour.  Version 1.3.0
sr. member
Activity: 661
Merit: 250
Log for devfee problem shows nothing :

[2018-04-10 12:04:28] GPU0:    692.0 H/S [yellowblack{T: 51c, RPM: 1126}]
[2018-04-10 12:04:28] GPU1:    692.0 H/S [yellowblack{T: 51c, RPM: 1126}]
[2018-04-10 12:04:28] GPU2:    692.0 H/S [yellowblack{T: 65c, RPM: 1104}]
[2018-04-10 12:04:28] GPU3:    669.0 H/S [yellowblack{T: 65c, RPM: 1104}]
[2018-04-10 12:04:28] yellowblack{Total:   2745.0 H/S}
[2018-04-10 12:04:31] limeblack{Pool accepted result 0x0000F8F6}
[2018-04-10 12:04:59] limeblack{Pool accepted result 0x0000FE46}
[2018-04-10 12:05:08] limeblack{Pool accepted result 0x0001769B}
[2018-04-10 12:05:12] limeblack{Pool accepted result 0x00019751}
[2018-04-10 12:05:27] limeblack{Pool accepted result 0x000064BE}
[2018-04-10 12:05:45] limeblack{Pool accepted result 0x0000CD77}
[2018-04-10 12:06:09] limeblack{Pool accepted result 0x00016F5C}
[2018-04-10 12:06:16] limeblack{Pool accepted result 0x0000EBDE}
[2018-04-10 12:06:30] limeblack{Pool accepted result 0x00018995}
[2018-04-10 12:06:34] limeblack{Pool accepted result 0x00014BB4}
[2018-04-10 12:07:24] limeblack{Pool accepted result 0x0000297A}
[2018-04-10 12:07:28] GPU0:    693.0 H/S [yellowblack{T: 51c, RPM: 1127}]
[2018-04-10 12:07:28] GPU1:    687.0 H/S [yellowblack{T: 51c, RPM: 1127}]
[2018-04-10 12:07:28] GPU2:    692.0 H/S [yellowblack{T: 65c, RPM: 1104}]
[2018-04-10 12:07:28] GPU3:    678.0 H/S [yellowblack{T: 65c, RPM: 1104}]
[2018-04-10 12:07:28] yellowblack{Total:   2750.0 H/S}
[2018-04-10 12:07:49] limeblack{Pool accepted result 0x000198C0}
[2018-04-10 12:08:00] limeblack{Pool accepted result 0x0000C054}
[2018-04-10 12:08:10] limeblack{Pool accepted result 0x00000A11}
[2018-04-10 12:08:11] limeblack{Pool accepted result 0x00003780}
[2018-04-10 12:08:18] limeblack{Pool accepted result 0x00002B69}
[2018-04-10 12:08:33] Pool sent a new job (ID: 9494)
[2018-04-10 12:08:46] limeblack{Pool accepted result 0x0000498B}
[2018-04-10 12:08:49] limeblack{Pool accepted result 0x00006AA7}
[2018-04-10 12:08:53] limeblack{Pool accepted result 0x0000060B}
[2018-04-10 12:08:58] limeblack{Pool accepted result 0x00019AC4}
[2018-04-10 12:09:09] limeblack{Pool accepted result 0x000040D9}
[2018-04-10 12:09:23] Connected to devfee pool
[2018-04-10 12:10:28] GPU0:    692.0 H/S [yellowblack{T: 51c, RPM: 1129}]
[2018-04-10 12:10:28] GPU1:    696.0 H/S [yellowblack{T: 51c, RPM: 1129}]
[2018-04-10 12:10:28] GPU2:    692.0 H/S [yellowblack{T: 65c, RPM: 1105}]
[2018-04-10 12:10:28] GPU3:    678.0 H/S [yellowblack{T: 65c, RPM: 1105}]
[2018-04-10 12:10:28] yellowblack{Total:   2758.0 H/S}
[2018-04-10 12:13:28] GPU0:    694.0 H/S [yellowblack{T: 51c, RPM: 1128}]
[2018-04-10 12:13:28] GPU1:    693.0 H/S [yellowblack{T: 51c, RPM: 1128}]
[2018-04-10 12:13:28] GPU2:    692.0 H/S [yellowblack{T: 64c, RPM: 1105}]
[2018-04-10 12:13:28] GPU3:    678.0 H/S [yellowblack{T: 64c, RPM: 1105}]
[2018-04-10 12:13:28] yellowblack{Total:   2757.0 H/S}
[2018-04-10 12:16:29] GPU0:    693.0 H/S [yellowblack{T: 51c, RPM: 1127}]
[2018-04-10 12:16:29] GPU1:    694.0 H/S [yellowblack{T: 51c, RPM: 1127}]
[2018-04-10 12:16:29] GPU2:    692.0 H/S [yellowblack{T: 65c, RPM: 1104}]
[2018-04-10 12:16:29] GPU3:    682.0 H/S [yellowblack{T: 65c, RPM: 1104}]
[2018-04-10 12:16:29] yellowblack{Total:   2761.0 H/S}
[2018-04-10 12:19:29] GPU0:    684.0 H/S [yellowblack{T: 51c, RPM: 1127}]
[2018-04-10 12:19:29] GPU1:    694.0 H/S [yellowblack{T: 51c, RPM: 1127}]
[2018-04-10 12:19:29] GPU2:    692.0 H/S [yellowblack{T: 65c, RPM: 1102}]
[2018-04-10 12:19:29] GPU3:    670.0 H/S [yellowblack{T: 65c, RPM: 1102}]
[2018-04-10 12:19:29] yellowblack{Total:   2740.0 H/S}
[2018-04-10 12:22:29] GPU0:    692.0 H/S [yellowblack{T: 51c, RPM: 1127}]
[2018-04-10 12:22:29] GPU1:    686.0 H/S [yellowblack{T: 51c, RPM: 1127}]
[2018-04-10 12:22:29] GPU2:    692.0 H/S [yellowblack{T: 65c, RPM: 1103}]
[2018-04-10 12:22:29] GPU3:    678.0 H/S [yellowblack{T: 65c, RPM: 1103}]
[2018-04-10 12:22:29] yellowblack{Total:   2748.0 H/S}
[2018-04-10 12:25:29] GPU0:    692.0 H/S [yellowblack{T: 51c, RPM: 1129}]
[2018-04-10 12:25:29] GPU1:    694.0 H/S [yellowblack{T: 51c, RPM: 1129}]
[2018-04-10 12:25:29] GPU2:    694.0 H/S [yellowblack{T: 65c, RPM: 1101}]
[2018-04-10 12:25:29] GPU3:    671.0 H/S [yellowblack{T: 65c, RPM: 1101}]
[2018-04-10 12:25:29] yellowblack{Total:   2751.0 H/S}
[2018-04-10 12:28:30] GPU0:    693.0 H/S [yellowblack{T: 51c, RPM: 1127}]
[2018-04-10 12:28:30] GPU1:    683.0 H/S [yellowblack{T: 51c, RPM: 1127}]
[2018-04-10 12:28:30] GPU2:    692.0 H/S [yellowblack{T: 65c, RPM: 1105}]
[2018-04-10 12:28:30] GPU3:    668.0 H/S [yellowblack{T: 65c, RPM: 1105}]
[2018-04-10 12:28:30] yellowblack{Total:   2736.0 H/S}
[2018-04-10 12:31:30] GPU0:    680.0 H/S [yellowblack{T: 51c, RPM: 1127}]
[2018-04-10 12:31:30] GPU1:    695.0 H/S [yellowblack{T: 51c, RPM: 1127}]
[2018-04-10 12:31:30] GPU2:    693.0 H/S [yellowblack{T: 65c, RPM: 1106}]
[2018-04-10 12:31:30] GPU3:    678.0 H/S [yellowblack{T: 65c, RPM: 1106}]
[2018-04-10 12:31:30] yellowblack{Total:   2746.0 H/S}
[2018-04-10 12:34:30] GPU0:    692.0 H/S [yellowblack{T: 51c, RPM: 1129}]
[2018-04-10 12:34:30] GPU1:    692.0 H/S [yellowblack{T: 51c, RPM: 1129}]
[2018-04-10 12:34:30] GPU2:    694.0 H/S [yellowblack{T: 65c, RPM: 1105}]
[2018-04-10 12:34:30] GPU3:    678.0 H/S [yellowblack{T: 65c, RPM: 1105}]
[2018-04-10 12:34:30] yellowblack{Total:   2756.0 H/S}
[2018-04-10 12:37:31] GPU0:    692.0 H/S [yellowblack{T: 51c, RPM: 1131}]
[2018-04-10 12:37:31] GPU1:    693.0 H/S [yellowblack{T: 51c, RPM: 1131}]
[2018-04-10 12:37:31] GPU2:    692.0 H/S [yellowblack{T: 65c, RPM: 1104}]
[2018-04-10 12:37:31] GPU3:    678.0 H/S [yellowblack{T: 65c, RPM: 1104}]
[2018-04-10 12:37:31] yellowblack{Total:   2755.0 H/S}
[2018-04-10 12:40:31] GPU0:    692.0 H/S [yellowblack{T: 51c, RPM: 1129}]
[2018-04-10 12:40:31] GPU1:    693.0 H/S [yellowblack{T: 51c, RPM: 1129}]
[2018-04-10 12:40:31] GPU2:    692.0 H/S [yellowblack{T: 65c, RPM: 1103}]
[2018-04-10 12:40:31] GPU3:    678.0 H/S [yellowblack{T: 65c, RPM: 1103}]
[2018-04-10 12:40:31] yellowblack{Total:   2755.0 H/S}
[2018-04-10 12:43:31] GPU0:    685.0 H/S [yellowblack{T: 51c, RPM: 1131}]
[2018-04-10 12:43:31] GPU1:    692.0 H/S [yellowblack{T: 51c, RPM: 1131}]
[2018-04-10 12:43:31] GPU2:    692.0 H/S [yellowblack{T: 65c, RPM: 1103}]
[2018-04-10 12:43:31] GPU3:    678.0 H/S [yellowblack{T: 65c, RPM: 1103}]
[2018-04-10 12:43:31] yellowblack{Total:   2747.0 H/S}
[2018-04-10 12:46:31] GPU0:    692.0 H/S [yellowblack{T: 51c, RPM: 1129}]
[2018-04-10 12:46:31] GPU1:    693.0 H/S [yellowblack{T: 51c, RPM: 1129}]
[2018-04-10 12:46:31] GPU2:    692.0 H/S [yellowblack{T: 65c, RPM: 1103}]
[2018-04-10 12:46:31] GPU3:    679.0 H/S [yellowblack{T: 65c, RPM: 1103}]
[2018-04-10 12:46:31] yellowblack{Total:   2756.0 H/S}
[2018-04-10 12:49:32] GPU0:    691.0 H/S [yellowblack{T: 51c, RPM: 1131}]
[2018-04-10 12:49:32] GPU1:    692.0 H/S [yellowblack{T: 51c, RPM: 1131}]
[2018-04-10 12:49:32] GPU2:    682.0 H/S [yellowblack{T: 65c, RPM: 1103}]
[2018-04-10 12:49:32] GPU3:    672.0 H/S [yellowblack{T: 65c, RPM: 1103}]
[2018-04-10 12:49:32] yellowblack{Total:   2737.0 H/S}
[2018-04-10 12:52:32] GPU0:    692.0 H/S [yellowblack{T: 52c, RPM: 1130}]
[2018-04-10 12:52:32] GPU1:    692.0 H/S [yellowblack{T: 52c, RPM: 1130}]
[2018-04-10 12:52:32] GPU2:    692.0 H/S [yellowblack{T: 65c, RPM: 1102}]
[2018-04-10 12:52:32] GPU3:    669.0 H/S [yellowblack{T: 65c, RPM: 1102}]
[2018-04-10 12:52:32] yellowblack{Total:   2745.0 H/S}
[2018-04-10 12:55:32] GPU0:    693.0 H/S [yellowblack{T: 51c, RPM: 1129}]
[2018-04-10 12:55:32] GPU1:    692.0 H/S [yellowblack{T: 51c, RPM: 1129}]
[2018-04-10 12:55:32] GPU2:    692.0 H/S [yellowblack{T: 65c, RPM: 1101}]
[2018-04-10 12:55:32] GPU3:    678.0 H/S [yellowblack{T: 65c, RPM: 1101}]
[2018-04-10 12:55:32] yellowblack{Total:   2755.0 H/S}
[2018-04-10 12:58:32] GPU0:    692.0 H/S [yellowblack{T: 51c, RPM: 1127}]
[2018-04-10 12:58:32] GPU1:    693.0 H/S [yellowblack{T: 51c, RPM: 1127}]
[2018-04-10 12:58:32] GPU2:    692.0 H/S [yellowblack{T: 64c, RPM: 1104}]
[2018-04-10 12:58:32] GPU3:    678.0 H/S [yellowblack{T: 64c, RPM: 1104}]
[2018-04-10 12:58:32] yellowblack{Total:   2755.0 H/S}
full member
Activity: 729
Merit: 114

Testing V1.3.1 atm and its working stable.
Thank you for adding --adldisable option, i guess this was the problem for me all along.
The miner is stable and fast, speeds are on pair with SGminer and a little faster than Gateless Gate on my RX 4x0/5x0 cards.

Thanks and keep up the good work prijatelju  Grin


--adldisable should i add it to the config or the bat file?

In the bat file.
member
Activity: 131
Merit: 13
In the fray since 2013.
V1.3.1
- 'gpu_conf' is now a little more advanced , added worksize and threads option, for more fine tuning
- Intensity now goes from 0-300 , because on Lite and LiteV7 some cards can go more than 200
- Changed color scheme a little bit
- Some optimisations for Hawaii cards (290, 290x, 390, 390x), set intensity to 0 and double_threads to true, or play with manual settings in the 'gpu_conf' part

Note:
You can still use the old config style for 'gpu_conf' i f you want (id, intensity, double_threads). If mixing double_threads and threads, threads will win and be accepted  Grin

Testing V1.3.1 atm and its working stable.
Thank you for adding --adldisable option, i guess this was the problem for me all along.
The miner is stable and fast, speeds are on pair with SGminer and a little faster than Gateless Gate on my RX 4x0/5x0 cards.

Thanks and keep up the good work prijatelju  Grin


--adldisable should i add it to the config or the bat file?
Jump to: