Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 343. (Read 237263 times)

you must not have fully tweaked srbminer.

i wonder why cant i match srb's speed compare to xmr stak. srb is always much higher by about 2%.

i wonder what is your xmr settings?

waited even more

4gb daju slabije dosta, meni su za 4gb ovako :

{ "id" : 0, "intensity" : 61, "double_threads" : false}, iliti po novom config standardu { "id" : 0, "intensity" : 61, "threads" : 1} ako koristis 1.3.1 verziju

So from the looks of it vegas are doing 1480-1500 on CN-Heavy using SRBMiner. Basically the same as XMR STAK 2.4.3. I think I'll pass, I like my 0% fee compiled STAK.

{
/* Type can be : normal, normalv7, lite, litev7, heavy, ultraheavy  */
"cryptonight_type" : "normalv7",

/* Intensity 0-> auto intensity, or value from 1-300  */
"intensity" : 0,

/* To use 2 threads per card set double_threads to true  */
"double_threads" : true,

/* Gpu target temperature, leave it on 0 if you don't want to use this option  */
"target_temperature" : 0,

/* If you use a SSL/TLS encrypted pool set this to true*/
"pool_use_tls" : false,

/* Mining pool address WITHOUT the stratum+tcp:// or stratum+tls:// part  */
"pool" : "pool.minexmr.com:7777",

/* Address of you wallet  */
"wallet" : "44vHE35y9stAzHLKkLjqw3SmtnQ2AXd2k64xoUdFrKYFFL2XT7yxNQqF1otzwuJTFjH1uA6wPw7SGNh JTCqUFN4DJLXFSSj",

/* Password for your wallet, probably just x  */
"password" : "x",

/* Location for devfee servers, to get better latency  */
"location" : "europe",

/* If you want to log console output, put a filename here  */
"log_file" : "Zapis",

/* Advanced settings for each GPU manually */
/* Put in devices that you want to use, if you for ex. don't want to use gpu 2, just don't insert it,like in this example */
/* Id starts from 0 , not from 1 !! */
/* To get a list of available devices with their id's, use --listdevices parameter */
/* This is just an example, edit it and remove comment lines !! */

/*"gpu_conf" :
[
   { "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 1},
   { "id" : 1, "intensity" : 20, "worksize" : 16, "threads" : 2},
   { "id" : 3, "intensity" : 30, "worksize" : 16, "threads" : 2},
   { "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 1},
]*/
}

This is my config file and I added %EXE% -c config.txt --adldisable
And miner still crash after few minutes or if I press "H"
Someone help?

Am I the only one that has a problem and from time to time the miners doesn`t work and doesn`t do any work,the pool shows 0-1000 hashes ...

i wonder why i cant match srb's hashrate using xmr stak.

srb settings:
intensity: 60
single thread

xmr stak:
intensity: 960
strided-index: 2
memchunk: 8

now matter how i try, srb is 2% faster. hmmm

After testing for 24hrs. Here are my results. Running stable, except for the 49 expired blocks in 24hours.

Hardware: 6 x rx570 4GB

Settings:
Cclock: 1300 (900mV)
Mclock: 2000 (900mV)
Intensity: 58
Double Threads: True
Version: 1.3
Pool: Nanopool

Undervolted all cards using Sapphire Trixx by -100mV

I'm getting 952 h/s per card and 5712 h/s on all cards using 700watts on the wall.

at nanopool you must wait 10-15minutes

this my conf file. i checked wallet address 10 time and it is correct...
miner looks working but no hash on pool (nanopool)
this my conf file


/* Type can be : normal, normalv7, lite, litev7, heavy, ultraheavy  */
"cryptonight_type" : "normalv7",

/* Intensity 0-> auto intensity, or value from 1-300  */
"intensity" : 0,

/* To use 2 threads per card set double_threads to true  */
"double_threads" : false,

/* Gpu target temperature, leave it on 0 if you don't want to use this option  */
"target_temperature" : 0,

/* If you use a SSL/TLS encrypted pool set this to true*/
"pool_use_tls" : true,

/* Mining pool address WITHOUT the stratum+tcp:// or stratum+tls:// part  */
"pool" : "xmr-eu1.nanopool.org:14433",

/* Address of you wallet  */
"wallet" : "43xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxVdF7u",

/* Password for your wallet, probably just x  */
"password" : "x",

/* Location for devfee servers, to get better latency  */
"location" : "europe",

/* If you want to log console output, put a filename here  */
"log_file" : "",

/* Advanced settings for each GPU manually */
/* Put in devices that you want to use, if you for ex. don't want to use gpu 2, just don't insert it,like in this example */
/* Id starts from 0 , not from 1 !! */
/* To get a list of available devices with their id's, use --listdevices parameter */
/* This is just an example, edit it and remove comment lines !! */

/* This is just an example, edit it and remove comment lines (the slash and star) !! */
"gpu_conf" :
[
{ "id" : 0, "intensity" : 59, "double_threads" : true},
{ "id" : 1, "intensity" : 59, "double_threads" : true},
{ "id" : 2, "intensity" : 59, "double_threads" : true},
{ "id" : 3, "intensity" : 59, "double_threads" : true},
{ "id" : 4, "intensity" : 59, "double_threads" : true},
{ "id" : 5, "intensity" : 59, "double_threads" : true},
{ "id" : 6, "intensity" : 59, "double_threads" : true},
{ "id" : 7, "intensity" : 59, "double_threads" : true},

DStefanov, try to change intesity for each card.

https://imgur.com/a/do9t2
first 3 and last 2 rx580 8gb

Perfect! Thank you, it did the job.

I did is 64GB. Thanks.

p.s. I managed to release it, but I can not make more than 3 cards, with the highest hashrate is 378 h/s ...... I'm dying!


Where im wrong? I try %EXE% -c config.txt --adldisable, but nothing!

58 intens, 2 threads, uvek.

number of GB of your card * number of cards + 2

I have 6 cards x 8GB = 48GB!!! True?

If they are 4gb cards and you have 4, 16 just for the cards plus a bit is what I understand.  My 6 card rig I had to go to 48gigs on Claymore for it to run.

--J

mine is about 65000 or 75000 i think

My Virtual memory is 16000MB!
How much should it be?!?

"If you get a "Error CL_MEM_OBJECT_ALLOCATION_FAILURE when calling clEnqueueNDRangeKernel" error, increase virtual memory."

read first page