Pages:
Author

Topic: SRBMiner-MULTI GPU & CPU Miner 0.9.4 - page 18. (Read 44491 times)

hero member
Activity: 2548
Merit: 626
December 13, 2022, 05:02:51 AM
Hi, Doktro83. Yescryptr16 algo not work on RX580 gpu, please fix it.

last time you also said xdag not working but there was no issue with it at least for other people who were/are mining it.

can you describe 'not working' please ?
newbie
Activity: 315
Merit: 0
December 13, 2022, 03:10:47 AM
Hi, Doktro83. Yescryptr16 algo not work on RX580 gpu, please fix it.
hero member
Activity: 2548
Merit: 626
November 27, 2022, 04:26:48 AM
V1.1.3
+ Fixed miner crashing on ETHASH/ETCHASH + KASPA/HEAVYHASH dual mining options that appeared in previous version [ 1.1.2 ]
+ Added parameters '--a0-start-script' and '--a1-start-script' which run a user defined script every time algorithm 0 or 1 become active*
+ Added parameter '--start-script-delay' which delays mining for x seconds after a0 or a1 startup script was executed

***
Apply different OC settings every time an algorithm switch happens!

--a0-start-script and --a1-start-script is only for GPU's, and ONLY if using --multi-algorithm-job-mode 3 (which is automatically used when mining ZIL)
--start-script-delay can be used to define a delay (in seconds) that is applied after the script was run, but before mining resumes
hero member
Activity: 2548
Merit: 626
November 22, 2022, 11:32:36 AM
RX 5700 XT - Kaspa Hashrate & Profit - https://www.youtube.com/watch?v=xirEDGJ0gHg
RX 5700 XT - Vertcoin Hashrate & Profit - https://www.youtube.com/watch?v=d6SA7_LcJWU
My tests - RX 5700 XT with SRBMiner.

Thanks for the videos, appreciate it!
member
Activity: 221
Merit: 12
November 20, 2022, 04:35:30 PM
RX 5700 XT - Kaspa Hashrate & Profit (Dual Ergo+KAS) - https://www.youtube.com/watch?v=xirEDGJ0gHg
RX 5700 XT - Vertcoin Hashrate & Profit - https://www.youtube.com/watch?v=d6SA7_LcJWU
My tests - RX 5700 XT with SRBMiner.

RX 570 8GB - Kaspa Hashrate & Profit (Dual Ergo+KAS) - https://www.youtube.com/watch?v=dom6KjmPoxk
My tests - RX 570 8GB with SRBMiner.
hero member
Activity: 2548
Merit: 626
November 19, 2022, 07:06:53 PM
V1.1.2
+ Added algorithm 'sha256dt' (NOVO coin) for CPU/GPU mining, fee 0.85%
+ Added ETHASH/ETCHASH + SHA256DT dual mining mode
+ Added AUTOLYKOS2 + SHA256DT dual mining mode
+ Lowered devfee for 'sha512_256d_radiant' algorithm to 0.85% (CPU/GPU)
+ Reworked auto-tune procedure for GPU's
+ Added parameter '--gpu-disable-interleaving' which disables interleaving of threads (only when same GPU runs 2+ threads) - might get better hashrate in some cases
+ --gpu-buffer-mode 1 should work more stable on 4GB GPU's now
+ Bug fixes & minor improvements
hero member
Activity: 2548
Merit: 626
November 02, 2022, 08:02:01 AM
V1.1.1
+ Added algorithm 'evrprogpow' (EVRMORE coin) for CPU/GPU mining, fee 0.85%
+ Performance increase on 'cryptonight_gpu' algorithm for RDNA/RDNA2 GPU's
+ Performance increase on 'sha512_256d_radiant' algorithm for RDNA2 GPU's
+ Performance increase on 'lyra2v2_webchain' algorithm for GPU's
+ Progpow algorithms bugfixes [kawpow, firopow, epic, sero, veil, veriblock, zano]
+ Added parameter '--force-msr-tweaks' which forces usage of MSR tweaks for CPU mined algorithm/s *
+ Added support for gfx1036
+ Fixed detection of RX550 GPU's on newer AMD drivers

***
MSR tweaking was enabled by default for every algorithm on previous miner versions if miner had admin/root privileges.
Not every CPU mineable algorithm benefits from this, so from this version it will be automatically enabled only to algorithms that are known to benefit from it.
If one wants to force enable MSR tweaking it can be done adding '--force-msr-tweaks' parameter
newbie
Activity: 315
Merit: 0
October 23, 2022, 03:28:34 AM
XDAG mining not work.

Quote
[2022-10-23 11:25:48] Working on algorithm 1 jobs
[2022-10-23 11:26:21] Job received [9660276362041737726] [xdag][1]
[2022-10-23 11:26:23] RX Cache   initialized on node 0 [HP] [xdag]
[2022-10-23 11:26:23] RX Dataset initialized on node 0 [HP] [xdag]
[2022-10-23 11:26:23] RX Initialization time on node 0 : 2411 ms [xdag]
[2022-10-23 11:27:03] CPU result sent to pool [xdag][1]
[2022-10-23 11:27:03] Pool unexpectedly closed the connection [xdag]
[2022-10-23 11:27:03] Reconnecting to xdag.org:13656 in 5 seconds [xdag]
[2022-10-23 11:27:07] Connected to xdag.org:13656 [xdag]
[2022-10-23 11:27:23] CPU result sent to pool [xdag][1]
[2022-10-23 11:27:23] Pool unexpectedly closed the connection [xdag]
[2022-10-23 11:27:23] Reconnecting to xdag.org:13656 in 5 seconds [xdag]
[2022-10-23 11:27:27] Connected to xdag.org:13656 [xdag]

Also FiroPow not work with coins which use FiroPow (except Firo coin).
newbie
Activity: 23
Merit: 0
October 19, 2022, 07:29:53 PM
I like SrbMiner but for Monero mining Xmrig works better than SrbMiner every time I try.
I would use Xmrig for Monero mining
newbie
Activity: 315
Merit: 0
October 17, 2022, 12:59:03 PM
Your mining command line for miner is brainless, why you set 4 algos for mining?
newbie
Activity: 1
Merit: 0
October 16, 2022, 03:26:03 PM
Hey guys,

I need your help. I user an older version of SRBMiner some months ago and now I always got the same errors. Do you have any Idea for a good fix?

First I will show you the Mining log:

CPU0 : AMD EPYC 7702P 64-Core Processor [L3:  16384 KB][L2:  2048 KB][L1:  256 KB][PU:   4]

======================================================================
SRBMiner-MULTI 1.1.0

Press 's' to display stats
Press 'h' to display hashrate
Press z-v to disable/enable algorithm 0-3
======================================================================

Algorithm/s         : randomx+randomx+randomx+randomx [0.85% fee]+[0.85% fee]+[0.85% fee]+[0.85% fee]
Gpu mining          : disabled
Cpu mining          : enabled
Watchdog            : enabled
Huge-pages          : available
HW-Aes              : available

[2022-10-16 22:15:00] MSR tweaking enabled
[2022-10-16 22:15:00] If miner crashes try setting --msr-use-preset parameter manually
[2022-10-16 22:15:00] Algorithm 0 available values for --cpu-threads-intensity : 1
[2022-10-16 22:15:00] Algorithm 1 available values for --cpu-threads-intensity : 1
[2022-10-16 22:15:00] Algorithm 2 available values for --cpu-threads-intensity : 1
[2022-10-16 22:15:00] Algorithm 3 available values for --cpu-threads-intensity : 1
[2022-10-16 22:15:01] 4 CPU core/s - 4 thread/s detected
[2022-10-16 22:15:01] Using 1|1|1|1 thread/s for CPU mining
[2022-10-16 22:15:02] SSL/TLS connection established with randomxmonero.auto.nicehash.com:443 [TLS_AES_256_GCM_SHA384]
[2022-10-16 22:15:02] Connected to randomxmonero.auto.nicehash.com:443 [randomx]
[2022-10-16 22:15:02] Difficulty 173576.0000000000 [randomx][0]
[2022-10-16 22:15:05] Connected to randomxmonero.auto.nicehash.com:9200 [randomx]
[2022-10-16 22:15:05] Difficulty 173576.0000000000 [randomx][1]
[2022-10-16 22:15:08] SSL/TLS connection established with randomxmonero.auto.nicehash.com:443 [TLS_AES_256_GCM_SHA384]
[2022-10-16 22:15:08] Connected to randomxmonero.auto.nicehash.com:443 [randomx]
[2022-10-16 22:15:08] Difficulty 173576.0000000000 [randomx][2]
[2022-10-16 22:15:11] Connected to randomxmonero.auto.nicehash.com:9200 [randomx]
[2022-10-16 22:15:11] Difficulty 173576.0000000000 [randomx][3]
[2022-10-16 22:15:11] Job received [00000000d95efca0] block height 2734985 [randomx][3]
[2022-10-16 22:15:14] RX Cache   initialized on node 0 [  ] [randomx]
[2022-10-16 22:15:14] RX Dataset initialized on node 0 [  ] [randomx]
[2022-10-16 22:15:14] RX Initialization time on node 0 : 12148 ms [randomx]
[2022-10-16 22:15:18] Job received [0000000056a8c973] block height 2734986 [randomx][0]
[2022-10-16 22:15:29] RX Cache   initialized on node 0 [  ] [randomx]
[2022-10-16 22:15:29] RX Dataset initialized on node 0 [  ] [randomx]
[2022-10-16 22:15:29] RX Initialization time on node 0 : 15181 ms [randomx]
[2022-10-16 22:15:29] Job received [000000002f09c1ae] block height 2734986 [randomx][1]
[2022-10-16 22:15:48] RX Cache   initialized on node 0 [  ] [randomx]
[2022-10-16 22:15:48] RX Dataset initialized on node 0 [  ] [randomx]
[2022-10-16 22:15:48] RX Initialization time on node 0 : 18996 ms [randomx]
[2022-10-16 22:15:48] Not enough free memory available to allocate dataset on node 0 [randomx]
[2022-10-16 22:15:48] Worker thread 1 stopped
[2022-10-16 22:15:48] Worker thread 0 stopped
[2022-10-16 22:15:48] Dataset 0 released
[2022-10-16 22:15:48] Cache 0 released
[2022-10-16 22:15:48] Dataset 0 released
[2022-10-16 22:15:48] Cache 0 released
[2022-10-16 22:15:48] Dataset 0 released
[2022-10-16 22:15:48] Cache 0 released


I always get the memory error. I would like to fix it. Any idea? The error always comes on the same line. I tried to reduce cpu-threads. That didn't worked because I would like to use 4 times Connection to the mining pool. I used two times startum+tcp and two times stratum+ssl. I used the guided-setup.sh for configuration. Before that I did it on another way. Please help me.

Best regards
newbie
Activity: 315
Merit: 0
October 05, 2022, 01:30:26 AM
V1.1.0
+ Performance increase on 'sha512_256d_radiant' algorithm for GPU's
+ Small performance increase on 'sha512_256d_radiant' algorithm in DUAL mining modes [ ETHASH/ETCHASH/AUTOLYKOS2 ]

What is the reason for such algo? All these shit-algos are scam. It is already mined with fpga or even some private asics.
I try to mine it with 6 gpus for more then 24 hours. Block difficulty is about 10Phash, maximal share difficulty generated
by my gpus was about 3T, so you need about 300-500 RTX3090 to find blocks. Electricity cost is too high to spend it for that algo.
hero member
Activity: 2548
Merit: 626
October 04, 2022, 04:09:03 PM
V1.1.0
+ Performance increase on 'sha512_256d_radiant' algorithm for GPU's
+ Small performance increase on 'sha512_256d_radiant' algorithm in DUAL mining modes [ ETHASH/ETCHASH/AUTOLYKOS2 ]
newbie
Activity: 23
Merit: 0
October 04, 2022, 07:04:08 AM
timeout /t 30
setx GPU_MAX_HEAP_SIZE 100   
setx GPU_MAX_USE_SYNC_OBJECTS 1   
setx GPU_SINGLE_ALLOC_PERCENT 100   
setx GPU_MAX_ALLOC_PERCENT 100   
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100   
setx GPU_ENABLE_LARGE_ALLOCATION 100
setx GPU_MAX_WORKGROUP_SIZE 1024
@echo off
cd %~dp0
cls
"H:\xxx\yyy\SRBMiner106\SRBMiner-MULTI.exe" --disable-cpu --algorithm ethash --gpu-id 2 --pool somepool --wallet xxxxxxxxxxxxxxxxxxxx   --api-enable --api-rig-name blabla --gpu-intensity 22 --send-stales false
pause
rem --gpu-intensity 21
rem --gpu-auto-tune 1


if you use admin privilages you must write miner location in double quotes

working since 2021
newbie
Activity: 1
Merit: 0
October 04, 2022, 03:50:05 AM
  many of my AMD cards from 580 to 5600xt 5700xt 6600xt 6700XT are running SRBMiner error,shows like
 
no compatible devices found
Gpu tweaking disabled
 NAUGHTY5

Detecting OpenCL devices...

GPU0 : amd_radeon_rx_580_2048sp              [ellesmere    ][MEM:  8192 MB][CU: 32][BUS: 01]

======================================================================
SRBMiner-MULTI 1.0.7

Press 's' to display stats
Press 'h' to display hashrate
Press z-v to disable/enable algorithm 0-3
Press 0-9 to disable/enable GPU 0-9, shift+0-9 for GPU 10-19
======================================================================

Algorithm/s         : ethash+kaspa [0.65% fee]+[0.85% fee]
Gpu mining          : enabled
Cpu mining          : disabled
Watchdog            : enabled
Gpu tweaking        : disabled

[2022-10-04 10:34:03] Gpu tweaking disabled - no compatible devices found
[2022-10-04 10:34:23] A0|GPU0 | [BUS:01] [I:         22]
[2022-10-04 10:34:23] A1|GPU0 | [BUS:01] [I:          1]
full member
Activity: 1189
Merit: 209
October 04, 2022, 02:54:56 AM
SRBMiner-MULTI.exe --algorithm verushash --pool stratum+tcp://verushash.auto.nicehash.com:9200 --wallet *************.worker1 --password x --nicehash true
[2022-10-04 00:28:17] NAUGHTY5

Clean Windows installation. WTF?

It's not a clean install if you have windivert service installed, cause that's what NAUGHTY5 indicates.
KMSAuto uses WinDivert driver...
hero member
Activity: 2548
Merit: 626
October 04, 2022, 01:10:44 AM
SRBMiner-MULTI.exe --algorithm verushash --pool stratum+tcp://verushash.auto.nicehash.com:9200 --wallet *************.worker1 --password x --nicehash true
[2022-10-04 00:28:17] NAUGHTY5

Clean Windows installation. WTF?

It's not a clean install if you have windivert service installed, cause that's what NAUGHTY5 indicates.
full member
Activity: 1189
Merit: 209
October 03, 2022, 04:36:35 PM
SRBMiner-MULTI.exe --algorithm verushash --pool stratum+tcp://verushash.auto.nicehash.com:9200 --wallet *************.worker1 --password x --nicehash true
[2022-10-04 00:28:17] NAUGHTY5

Clean Windows installation. WTF?
jr. member
Activity: 131
Merit: 2
September 28, 2022, 04:23:30 AM
Is there any option to control power consumption on AMD cards in miner, without me having to resort to manual adjustment in Catalyst Driver or Bios Mod?
Mem clocks? Core Clocks? Power Limit?
Here, in my case, this is essential.
Tks...   Wink
Try OverdriveNTool.
overdrive ntool outdated,not supported new drivers.
hero member
Activity: 2548
Merit: 626
September 27, 2022, 11:01:01 AM
V1.0.9
+ Added algorithm 'pufferfish2bmb' for Polaris/Vega cards
+ Performance increase on 'sha512_256d_radiant' algorithm for GPU's
+ Reworked ZIL mining modes*
+ Added automatic caching of ZIL DAG for ETHASH/ETCHASH + ZIL (if GPU has enough VRAM to hold both DAG's)
+ Added nicehash compatibility for algorithm 'verushash'
+ Added parameter '--disable-auto-affinity'
+ Bug fixes

***
ZIL can be mined in a few ways :

1. ETHASH/ETCHASH + ZIL [ mining ETHASH/ETCHASH until ZIL time, then it switches to ZIL, mines it, and returns to ETHASH/ETCHASH mining. Uses a pool that automatically does the switching, ezil.me for example]
2. ZIL + Any algorithm [ mines the second algorithm until it's ZIL time - then it switches to ZIL, mines it, and returns to second algo mining when done with ZIL ]
3. ETHASH/ETCHASH + ZIL + ALPH/IRONFISH/HEAVYHASH/KASPA/RADIANT [ mines ETHASH/ETCHASH + ZIL on ezil.me for example, with the second algorithm simultaneously. ETHASH/ETCHASH + ZIL uses a pool that automatically does the ZIL switching, ezil.me for example ]

Examples:

1. ETCHASH + ZIL
--disable-cpu --algorithm etchash --pool stratum+tcps://eu.ezil.me:24443 --wallet etc-wallet.zil-wallet

2. ZIL + KASPA
--disable-cpu --a0-is-zil --algorithm etchash --algorithm kaspa --pool stratum+tcps://eu.ezil.me:24443 --pool ru.acc-pool.pw:16061 --wallet etc-wallet.zil-wallet --wallet kaspa-wallet

3. ETCHASH + ZIL + RADIANT
--disable-cpu --algorithm etchash --algorithm sha512_256d_radiant --pool stratum+tcps://eu.ezil.me:24443 --pool stratum-eu.rplant.xyz:7086 --wallet etc-wallet.zil-wallet --wallet radiant-wallet


Notes :
--a0-is-zil can be used only for case nr. 2! [ ZIL + Any algorithm ]
If you don't have enough VRAM for ZIL DAG + second algorithm's memory requirements, add --gpu-buffer-mode 1 to your cmd parameters

***
--disable-auto-affinity

Use this parameter if you have a multi node CPU, and the automatic affinity setup isn't working the way you want it.
You will need to run a miner instance per node, and define --cpu-threads manually.

Example in Windows :
start /NODE 0 /B /W SRBMiner-MULTI.exe --disable-auto-affinity --disable-gpu --cpu-threads 48 ...
start /NODE 1 /B /W SRBMiner-MULTI.exe --disable-auto-affinity --disable-gpu --cpu-threads 48 ...
Pages:
Jump to: