?? 
Topic: STAR COIN [STR] - The coin with bonus STAR blocks - page 45. (Read 143770 times)
The trades still not restored in cryptsy???
?? 
Network Hashrate: 236.047 MH/s
The trades still not restored in cryptsy?
Just to confirm, my coins did make it through once the wallet had sync'd but so did a load more 0.09 deposits Which have all been confirmed.
So just to clarify (if you cant tell from the piccys below :-) )
25 x 0.09 transactions (Not-Confirmed/Generated but not accepted) before the 1 x 677 mined coin transaction (confirmed) then another 18 x 0.09 transactions (Confirmed)
So im still dubious that the payout system is working 100% correctly - its definately paying out, just think it might be paying out a little too much (I was wondering if maybe the 0.09 was the transaction fee or something like that which is going to the miner rather than the pool, but im not sure lol i dont know much about that side of things {as you can probably tell
} )
Hoping its not a major issue.
All the best
Stuart
So just to clarify (if you cant tell from the piccys below :-) )
25 x 0.09 transactions (Not-Confirmed/Generated but not accepted) before the 1 x 677 mined coin transaction (confirmed) then another 18 x 0.09 transactions (Confirmed)
So im still dubious that the payout system is working 100% correctly - its definately paying out, just think it might be paying out a little too much (I was wondering if maybe the 0.09 was the transaction fee or something like that which is going to the miner rather than the pool, but im not sure lol i dont know much about that side of things {as you can probably tell
} )Hoping its not a major issue.
All the best
Stuart
I tried out http://str.minar.cc/ again I just realized the auto pay out don't appear to trigger (was set to 100 coins, but confirmed balance was 650+)
So I sent a manual payout and it would appear its showing up in fractions of the total amount so far i have had 18 transactions into the wallet at 0.09 str each, but when i look at the details of them, apparently they are Debits of 0 str, with the net amount -100str or so)(the wallet is still out of sync so im wondering if that might be the issue - i have just noticed the transactions aren't getting confirmations, its saying generated but not accepted)
I'm hoping this is just an issue with my wallet itself, But it might be worth while checking the pay outs if you havent already checked them since the pool came back online
I have since moved my miners onto another coin whilst the STR wallet syncs up and I try to work out why its not working correctly for me (the wallet worked last month ;-) so im not sure if i needed to get a new version or anything like that :-) )
Has anyone seen a similar issue before? Any advice would be wonderful.
All the best
Stuart
So I sent a manual payout and it would appear its showing up in fractions of the total amount so far i have had 18 transactions into the wallet at 0.09 str each, but when i look at the details of them, apparently they are Debits of 0 str, with the net amount -100str or so)(the wallet is still out of sync so im wondering if that might be the issue - i have just noticed the transactions aren't getting confirmations, its saying generated but not accepted)
I'm hoping this is just an issue with my wallet itself, But it might be worth while checking the pay outs if you havent already checked them since the pool came back online
I have since moved my miners onto another coin whilst the STR wallet syncs up and I try to work out why its not working correctly for me (the wallet worked last month ;-) so im not sure if i needed to get a new version or anything like that :-) )
Has anyone seen a similar issue before? Any advice would be wonderful.
All the best
Stuart

{
"blocks" : 112988,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.48946531,
"errors" : "",
"generate" : true,
"genproclimit" : 6,
"hashespersec" : 45738,
"networkhashps" : 70446383,
"pooledtx" : 0,
"testnet" : false
}
hope this is the correct chain
I'll give it a shot...let's hope it gets listed at cryptsy again.
I don't see any problems with the new client, happily mining it now.
Yea, but which chain you mining?
If you use the new version, there's only one chain.
{
"blocks" : 112758,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.44580723,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 65798194,
"pooledtx" : 0,
"testnet" : false
}
everything works fine for me in the last few days, and I mined and confirmed many blocks.
I don't see any problems with the new client, happily mining it now.
Yea, but which chain you mining?
Does not look you sync'd all, the last checkpoint in the code I see is block 106239, check source code in github.
My wallet is in sync at block 110784:
My wallet is in sync at block 110784:
Quote
{
"blocks" : 110784,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.35599822,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 49858718,
"pooledtx" : 0,
"testnet" : false
}
"blocks" : 110784,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.35599822,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 49858718,
"pooledtx" : 0,
"testnet" : false
}
Is this correct ?
EDIT: i have 34 connections so i think this is the correct fork, it can be that all 35 are wrong though...
Code:
"blocks" : 102654,
"moneysupply" : 7902914.00709800,
If so, ill start the pool back up"moneysupply" : 7902914.00709800,
EDIT: i have 34 connections so i think this is the correct fork, it can be that all 35 are wrong though...
well.. I have started the pool for testing now...
but the client seems to be downloading blocks... i dont know what going on
-salvagewallet just spits thousands of these:
Code:
******* exception encountered *******
starcoind[0x819b80c]
starcoind[0x8065331]
starcoind[0x81cb613]
starcoind[0x81ce256]
starcoind[0x81cffcc]
starcoind[0x80a0351]
starcoind[0x80a4237]
starcoind[0x805d24e]
/lib/i386-linux-gnu/tls/i686/nosegneg/libc.so.6(__libc_start_main+0xf3)[0xb6fe44d3]
starcoind[0x8061885]
starcoind[0x819b80c]
starcoind[0x8065331]
starcoind[0x81cb613]
starcoind[0x81ce256]
starcoind[0x81cffcc]
starcoind[0x80a0351]
starcoind[0x80a4237]
starcoind[0x805d24e]
/lib/i386-linux-gnu/tls/i686/nosegneg/libc.so.6(__libc_start_main+0xf3)[0xb6fe44d3]
starcoind[0x8061885]
Is this correct ?
EDIT: i have 34 connections so i think this is the correct fork, it can be that all 35 are wrong though...
Code:
"blocks" : 102654,
"moneysupply" : 7902914.00709800,
If so, ill start the pool back up"moneysupply" : 7902914.00709800,
EDIT: i have 34 connections so i think this is the correct fork, it can be that all 35 are wrong though...
Correct me if I am wrong, but no exchange is currently trading STR?
Hi pimps. added new checkpoints which we think will fix any issues
download the new version (1.3)
https://docs.google.com/file/d/0B-_cT_EUbb3oSGhkOWh5ODRidjA/edit?usp=sharing
https://mega.co.nz/#!cg0jXLQQ!OaB3vCxB3H6WPFq3yJFWVBTfDgUaOqx_xl--i78w3pk
have updated the home page and OP post
the wallet sync is fine, just may take some time (1-1.5 hrs sinc from scratch), and there are some orphan chains around,
it takes time for the program to figure it out, but the blockchain is fine, and mining works fine also.
Happy mining!!
download the new version (1.3)
https://docs.google.com/file/d/0B-_cT_EUbb3oSGhkOWh5ODRidjA/edit?usp=sharing
https://mega.co.nz/#!cg0jXLQQ!OaB3vCxB3H6WPFq3yJFWVBTfDgUaOqx_xl--i78w3pk
have updated the home page and OP post
the wallet sync is fine, just may take some time (1-1.5 hrs sinc from scratch), and there are some orphan chains around,
it takes time for the program to figure it out, but the blockchain is fine, and mining works fine also.
Happy mining!!
Is github updated to latest version too?
I saw github updated too.
Hi pimps. added new checkpoints which we think will fix any issues
download the new version (1.3)
https://docs.google.com/file/d/0B-_cT_EUbb3oSGhkOWh5ODRidjA/edit?usp=sharing
https://mega.co.nz/#!cg0jXLQQ!OaB3vCxB3H6WPFq3yJFWVBTfDgUaOqx_xl--i78w3pk
have updated the home page and OP post
the wallet sync is fine, just may take some time (1-1.5 hrs sinc from scratch), and there are some orphan chains around,
it takes time for the program to figure it out, but the blockchain is fine, and mining works fine also.
Happy mining!!
download the new version (1.3)
https://docs.google.com/file/d/0B-_cT_EUbb3oSGhkOWh5ODRidjA/edit?usp=sharing
https://mega.co.nz/#!cg0jXLQQ!OaB3vCxB3H6WPFq3yJFWVBTfDgUaOqx_xl--i78w3pk
have updated the home page and OP post
the wallet sync is fine, just may take some time (1-1.5 hrs sinc from scratch), and there are some orphan chains around,
it takes time for the program to figure it out, but the blockchain is fine, and mining works fine also.
Happy mining!!
Is github updated to latest version too?
I don't see any problems with the new client, happily mining it now.
Considering the dev has yet to respond, run now.
I dumped some time ago when I saw the chain had problems.
This is one fucked up coin atm...
I have the solution for a price lol
Hi pimps. added new checkpoints which we think will fix any issues
download the new version (1.3)
https://docs.google.com/file/d/0B-_cT_EUbb3oSGhkOWh5ODRidjA/edit?usp=sharing
https://mega.co.nz/#!cg0jXLQQ!OaB3vCxB3H6WPFq3yJFWVBTfDgUaOqx_xl--i78w3pk
have updated the home page and OP post
the wallet sync is fine, just may take some time (1-1.5 hrs sinc from scratch), and there are some orphan chains around,
it takes time for the program to figure it out, but the blockchain is fine, and mining works fine also.
Happy mining!!
download the new version (1.3)
https://docs.google.com/file/d/0B-_cT_EUbb3oSGhkOWh5ODRidjA/edit?usp=sharing
https://mega.co.nz/#!cg0jXLQQ!OaB3vCxB3H6WPFq3yJFWVBTfDgUaOqx_xl--i78w3pk
have updated the home page and OP post
the wallet sync is fine, just may take some time (1-1.5 hrs sinc from scratch), and there are some orphan chains around,
it takes time for the program to figure it out, but the blockchain is fine, and mining works fine also.
Happy mining!!
The fact you posted this it is obvious you are not aware of te issue. Guess again since that's what your doing.
Jump to: