Swedish ASIC miner company kncminer.com - page 1186.

edgar

legendary

Activity: 1848

Merit: 1001

Quote from: sbfree on October 29, 2013, 02:21:42 PM

Quote from: DimensionsOfHell on October 29, 2013, 02:19:30 PM

So far with fw 0.9.8 my saturn went from 135GH/s to 203GH/s at the pool. That is the first time I've seen it hit 200GH/s. I wish I could get to 270+ like some of you guys are getting.

Hey, have you used bertmod to see what is going on in there? Post those stats, maybe give you some ideas. Hurry!

and enablecores.bin

DPoS

sr. member

Activity: 462

Merit: 250

Quote from: btc_uzr on October 29, 2013, 01:41:23 PM

Had issues with closed http/ssh ports after a previous firmware upgrade. Simple reset did not help.

My good miner just closed up like that but it is still hashing strong on BTCGuild so I'll just leave it to mind its own business

Troubled miner on .98 has woke well with the little overclockin that it does.. keeps many more cores alive and around 2% HW error rate. Still have one dead die. But gained about 75Gh which brings it over 500 on avg

still would be nice to have release notes on the firmwares

sbfree

sr. member

Activity: 336

Merit: 250

Quote from: DimensionsOfHell on October 29, 2013, 02:19:30 PM

So far with fw 0.9.8 my saturn went from 135GH/s to 203GH/s at the pool. That is the first time I've seen it hit 200GH/s. I wish I could get to 270+ like some of you guys are getting.

Hey, have you used bertmod to see what is going on in there? Post those stats, maybe give you some ideas. Hurry!

sbfree

sr. member

Activity: 336

Merit: 250

4HRS into .98 on Saturn

server pool stats:
miner_knc 280.53 GH/s 55,000k (99.83%)

beautiful hash rate.

cgminer stats:

294.0G/284.9Gh/s | A:898688 R:12032 HW:21756 WU:3995.8/

around 2% HW error , when 15%-20% prior

Room temp a hot 80F (about 27C) and chips are 51.5c and 53c

I hope this keeps up!

DimensionsOfHell

full member

Activity: 346

Merit: 100

So far with fw 0.9.8 my saturn went from 135GH/s to 203GH/s at the pool. That is the first time I've seen it hit 200GH/s. I wish I could get to 270+ like some of you guys are getting.

Mogumodz

sr. member

Activity: 290

Merit: 250

Quote from: ?? on ??

Quote from: bobsag3 on October 29, 2013, 01:50:01 PM

Quote from: ?? on ??

Flashed the dead boards again with .98 - removed the prefix

THEY ARE ALIVE

@phoenix - play with mining url in the GUI and keep flashing 98 and rebooting/saving/rebooting CGMiner - ive been doing this and for whatever reason things are starting to wake up now

Really?
I have one jup with .98 on it that has a bad ASIC... might try to reconnect it

Top 2 are R5/R6, bottom left is the 3/4 jup. Still gets 415!

Wow, my "good" Jups don't go above 550 - You lucked out.

I did the whole DC of the boards and RC - not sure if that had any affect

FYI, Before I updated to 0.98, a Jupiter on 0.96 & 0.97 never went over 390GH, now over 500+
Will run it over night and see how it goes with the 12 hour average.

Mogumodz

sr. member

Activity: 290

Merit: 250

Adding stratum+tcp:// worked for me.

Kept getting Pool URL invalid otherwise.

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Quote from: ?? on ??

Flashed the dead boards again with .98 - removed the prefix

THEY ARE ALIVE

@phoenix - play with mining url in the GUI and keep flashing 98 and rebooting/saving/rebooting CGMiner - ive been doing this and for whatever reason things are starting to wake up now

Really?
I have one jup with .98 on it that has a bad ASIC... might try to reconnect it

Top 2 are R5/R6, bottom left is the 3/4 jup. Still gets 415!

FiatKiller

sr. member

Activity: 378

Merit: 250

do an enablecores also...

edgar

legendary

Activity: 1848

Merit: 1001

i tried adding stratum+tcp:// yesterday and experienced a 100Gh drop that didnt improve until i removed it again.

Still stable @ 570 on .98 here.

Tehfiend

hero member

Activity: 491

Merit: 514

Quote from: AussieHash on October 29, 2013, 01:39:32 PM

For those having trouble connecting to your pool after a 0.98 upgrade, have you followed this advice ?

https://bitcointalksearch.org/topic/m.3425822

Quote from: -ck on October 28, 2013, 02:31:55 AM

If you specify a stratum pool without the stratum+tcp:// prefix, cgminer tries a few different ways to connect first. Some pools don't like this and it can take a while before cgminer can connect. So to speed up the connections, add the prefix.

Just tried this and still getting the following:

Code:

[2013-10-29 18:43:03] Waiting for work to be available from pools.
[2013-10-29 18:43:05] Pool 3 difficulty changed to 1.999969
[2013-10-29 18:43:39] Stratum connection to pool 1 interrupted
[2013-10-29 18:45:18] Lost 122 shares due to stratum disconnect on pool 1

mearylll

sr. member

Activity: 315

Merit: 250

Quote from: jelin1984 on October 29, 2013, 01:32:08 PM

mine run only at 565gh Huh

Your lucky, do not touch it again

btc_uzr

sr. member

Activity: 476

Merit: 250

let's have some fun

Quote from: Phoenix1969 on October 29, 2013, 01:33:07 PM

(...)
OMG this is bad... a factory reset locks me out of putty somehow.. it refuses connection every time

Had issues with closed http/ssh ports after a previous firmware upgrade. Simple reset did not help.

try the following: disconnect all boards, start miner, wait for 'boot-failure', then reset - if it's now working, flash another firmware, shut it down, connect all boards and start

AussieHash

hero member

Activity: 692

Merit: 500

For those having trouble connecting to your pool after a 0.98 upgrade, have you followed this advice ?

https://bitcointalksearch.org/topic/m.3425822

Quote from: -ck on October 28, 2013, 02:31:55 AM

If you specify a stratum pool without the stratum+tcp:// prefix, cgminer tries a few different ways to connect first. Some pools don't like this and it can take a while before cgminer can connect. So to speed up the connections, add the prefix.

xstr8guy

hero member

Activity: 784

Merit: 1004

Glow Stick Dance!

Quote from: jelin1984 on October 29, 2013, 01:32:08 PM

mine run only at 565gh Huh

Only?! Like that's bad, lol.

timmmers

sr. member

Activity: 1176

Merit: 265

FYI I've been on Eligus without any problems, the only dip was me updating at 3.20pm for a couple of minutes..all fine now. Mind you, I always check everything these chimpanzees have a hand in now, set the pool details myself just to be sure. Bear in mind that they can't even manage a simple fucking download link, or packing a box properly, or removing plastic from chips.. you need to check the little stuff that you'd easily get right. Imagine Forest Gump did it all, you'll be on the right track

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: Tehfiend on October 29, 2013, 01:31:38 PM

Quote from: ?? on ??

edit: As soon as I type my password in and hit Enter, PuTTY locks up. Angry

I had the same problem during my testing when using Eligius. Try BTCguild and see if it works...

passwords are reset to admin after a factory reset...

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: Henchman24 on October 29, 2013, 01:14:58 PM

Quote from: trepex on October 29, 2013, 12:09:08 PM

Saturn: 0.97 & manual cgminer 3.6.6 installation vs. 0.98
cgminer avg. hashrate: 269.5 vs. 279-280
Power usage @230V: 280W vs. 305W
Temperatures: +3C
HW error rate: 7.5% vs. 2.5%

Great! I am happy. 9GH for 25W sounds Ok. Better than my Jalapeno Cheesy

I also went from .97 + manual cgminer 3.6.6 to .98

I had nearly identical results.

*Important Note: After the first flash to .98 and subsequent forced reboot, I was getting no hashrate in kncminer status tab. When I ssh'd into the box, I saw cgminer was getting nothing but hardware errors and core disable messages were scrolling by quickly. I just restarted the miner using the "Restart" button in the Security tab and everything came up roses.

OMG this is bad... a factory reset locks me out of putty somehow.. it refuses connection every time

timmmers

sr. member

Activity: 1176

Merit: 265

Quote from: CYPER on October 29, 2013, 12:28:22 PM

Quote from: The Avenger on October 29, 2013, 11:28:51 AM

Quote from: CYPER on October 29, 2013, 10:43:03 AM

Does anyone know if my miners have been collected/shipped today or yesterday?

Sorry Cyper, they are bs-ing you if they said this meant it was shipped. I had the same situation. Shipping info recieved only means dhl have been informed. Tomorrow you will get the "Shipment picked up" in the morning. Then the day after it should be delivered. So prob it will arrive on the 31st

I am at disbelief at the level of misinformation and false claims repeatedly made by KNC support staff.
And I wonder who benefits from such a way of conducting business Huh

It's definitely not me.

I was told yesterday noon (28.10) that my miners are ready and waiting to be picked up same day.
It turns out they will most probably not going to be picked up today either.

And as usual nobody is picking up the phone.

Mine was processed there 3 hours after the 1st entry, so that seems to mean it's booked for pickup in the 1st line...the next onee in the chain is it moving, less than a day from there for mine to UK. But mine was picked up before that time, hope they haven't shut for the day and make it sit there all day. I agree, someone's bullshitting big time. You should be paying November prices now. Thank god it's not weekend.

jelin1984

legendary

Activity: 2408

Merit: 1004

mine run only at 565gh Huh

Topic: Swedish ASIC miner company kncminer.com - page 1186. (Read 3049528 times)