edit: As soon as I type my password in and hit Enter, PuTTY locks up. 
I had the same problem during my testing when using Eligius. Try BTCguild and see if it works...
Topic: Swedish ASIC miner company kncminer.com - page 1187. (Read 3049528 times)
I had the same problem during my testing when using Eligius. Try BTCguild and see if it works...
He's having problems connecting to eligius as I am, right after the change. Slush works fine. Don't know why. It's bound to be some minor leftover in some config file. When I had previous problems connecting to eligius and had no backup pool cgminer would also crash shortly after starting.
Everything runs hotter in 0.98 so went back to good cold setup.
I am also having this problem with 0.98. I run a "load balance" setup with 99% to Eligius and 1% to BTCguild (for idle miner notification and per worker stats). After I upgraded, the Eligius pool was reported as "dead" in cgminer and was not submitting any shares to that pool. If I removed the BTCguild pool, cgminer would hang on bootup. I even reflashed to 0.97 and had the same problem. BTCGuild is still running fine however.
Edit: The Eligius pool is now shown as "alive" but still not submitting shares. When I disabled BTCbuild I get the following errors:
Code:
[2013-10-29 18:29:20] Pool 1 communication resumed, submitting work
[2013-10-29 18:29:21] Pool 1 stratum share submission failure
[2013-10-29 18:33:59] Stratum connection to pool 1 interrupted
[2013-10-29 18:29:21] Pool 1 stratum share submission failure
[2013-10-29 18:33:59] Stratum connection to pool 1 interrupted
My Avalon's are still working with Eligius so don't think this problem is on their end.
i am getting a lot more duplicate shares for some reason, about 3 percent. not quite sure why.
doesn't duplicate merely mean another miner submitted the same hash already? going to happen more often with more network hashing power.
regarding trouble shooting and just to cover this possibility, anyone tried the following?:
(re)move your cgminer.conf
start cgminer
enter pool
if not working, try another one
if working save config through cgminer
and restart to see whether it's fine now
(re)move your cgminer.conf
start cgminer
enter pool
if not working, try another one
if working save config through cgminer
and restart to see whether it's fine now
Can you give me steps to do this? Not too familiar with that.
Code:
ssh root@your_miner;
thenCode:
cd /config;
mv cgminer.conf cgminer.conf.bak;
screen cgminer
mv cgminer.conf cgminer.conf.bak;
screen cgminer
now cgminer should ask for a pool:port/username/pw
enter those things
now, if it's connected to a pool and running fine, press following keys:
Code:
s
w
s => Settings, w
w => write config,
edit:
if first pool doesn't work, kill cgminer with 'Ctrl+c' and retry the procedure with another pool
Seems Im lucky after 0.98 FW all works fine and I got about +30 GH.
i am getting a lot more duplicate shares for some reason, about 3 percent. not quite sure why.
I made a copy of my working cgminer.conf before I flashed my Jupiters. They wouldn't hash until I restored my saved config files. I don't know what's in the new configs that makes cgminer just hang, but restoring the old copies fixed them.
Good thing KnC "tested" this FW
It's nearly impossible to cover *each and every thing possible* - and if you think you have covered everything you receive a dump showing you the opposite.
FM 9.8 running strong after half a million shares.
regarding trouble shooting and just to cover this possibility, anyone tried the following?:
(re)move your cgminer.conf
start cgminer
enter pool
if not working, try another one
if working save config through cgminer
and restart to see whether it's fine now
(re)move your cgminer.conf
start cgminer
enter pool
if not working, try another one
if working save config through cgminer
and restart to see whether it's fine now
Saturn: 0.97 & manual cgminer 3.6.6 installation vs. 0.98
cgminer avg. hashrate: 269.5 vs. 279-280
Power usage @230V: 280W vs. 305W
Temperatures: +3C
HW error rate: 7.5% vs. 2.5%
Great! I am happy. 9GH for 25W sounds Ok. Better than my Jalapeno
cgminer avg. hashrate: 269.5 vs. 279-280
Power usage @230V: 280W vs. 305W
Temperatures: +3C
HW error rate: 7.5% vs. 2.5%
Great! I am happy. 9GH for 25W sounds Ok. Better than my Jalapeno
I also went from .97 + manual cgminer 3.6.6 to .98
I had nearly identical results.
*Important Note: After the first flash to .98 and subsequent forced reboot, I was getting no hashrate in kncminer status tab. When I ssh'd into the box, I saw cgminer was getting nothing but hardware errors and core disable messages were scrolling by quickly. I just restarted the miner using the "Restart" button in the Security tab and everything came up roses.
when I had problems with 0.97 it only worked after going to 0.95.
Tried flashing back to 0.97, and all the miners are DEAD!!!!!
OOOMMMGGG
OOOMMMGGG
Same here man, EVERY. SINGLE. MINER. DUST.
Tried flashing back to 0.97, and all the miners are DEAD!!!!!
OOOMMMGGG
OOOMMMGGG
Seeing cores turning off in 0.98 in boards that never had bad cores and that were not there 40 mn ago before the upgrade. Those boards (supposedly the good ones) always ran cold also. 
Hard to tell how things look hashrate wise this early for this half bad Jupiter. Not being able to connect to Eligius makes it a bit harder to do that. It does look good HW wise and hashrate wise as reported by the new cgminer though. WU much lower. Will just leave at Slush for now.
Hard to tell how things look hashrate wise this early for this half bad Jupiter. Not being able to connect to Eligius makes it a bit harder to do that. It does look good HW wise and hashrate wise as reported by the new cgminer though. WU much lower. Will just leave at Slush for now.
So, I put .98 on all my Jupiters and rebooted.. now not 1 of them will connect to Eligius. I reset/rebooted everything. Lovely.
yep...I'm having SEVERE problems with 0.98
Pool credentials invalid....
They put http in front of the damned address again!!!!
wtf, I'm using eligius and working just fine...
So, I put .98 on all my Jupiters and rebooted.. now not 1 of them will connect to Eligius. I reset/rebooted everything. Lovely.
yep...I'm having SEVERE problems with 0.98
Pool credentials invalid....
They put http in front of the damned address again!!!!
He's having problems connecting to eligius as I am, right after the change. Slush works fine. Don't know why. It's bound to be some minor leftover in some config file. When I had previous problems connecting to eligius and had no backup pool cgminer would also crash shortly after starting.
Everything runs hotter in 0.98 so went back to good cold setup.
So, I put .98 on all my Jupiters and rebooted.. now not 1 of them will connect to Eligius. I reset/rebooted everything. Lovely.
Same here.
Are you back on .96?
So, I put .98 on all my Jupiters and rebooted.. now not 1 of them will connect to Eligius. I reset/rebooted everything. Lovely.
Eligius just had a few issues. Retry now... for a few moments my miners lost connection
Negatory.. EVERY single miner of mine is NOT hashing after .98 flash.
Did a full reset and manually put in all settings, saved, rebooted etc.
4 Jupiters will not hash on .98 - pretty sure I'm not doing anything tarded on my end.
My miner was not connecting when I first upgraded to .97
What worked for me was flashing back to .95, then doing a hard reset, and then upgrading to .97.
I'm pretty sure I'm gonna have to do the same thing when I get home and try to flash up to .98.
Negatory.. EVERY single miner of mine is NOT hashing after .98 flash.
Did a full reset and manually put in all settings, saved, rebooted etc.
4 Jupiters will not hash on .98 - pretty sure I'm not doing anything tarded on my end.
Did a full reset and manually put in all settings, saved, rebooted etc.
4 Jupiters will not hash on .98 - pretty sure I'm not doing anything tarded on my end.
and I assume you are checking by SSH'ing into the miner and checking the status there?
Of course. It's having an issue finding work from the URL
I double checked and theres no double http, tried with it, tried without. It will "not find work on the pool" and autocloses.
I have not changed anything- just did a standard FW upgrade like I've been doing the others.
Trying to put .96 on now.
Is this the biggest joke ever? .98 just borked all 4 of my miners. I put .96 back on , rebooted, same thing.
WTF just happened to me? Anyone?
complete opposite for me man, .98 fixed every single issue i had.
maybe your miners are sub standard quality?
my stats after .98 upgrade about 2 hours ago. still climbing up and up!
http://eligius.st/~wizkid057/newstats/userstats.php/12kiuiVdTiYUA5ridr9S2GoWuaGUKVZQnP
http://eligius.st/~wizkid057/newstats/userstats.php/12kiuiVdTiYUA5ridr9S2GoWuaGUKVZQnP
Jump to: