Swedish ASIC miner company kncminer.com - page 1188.

WastedLTC

hero member

Activity: 778

Merit: 563

Quote from: ?? on ??

Negatory.. EVERY single miner of mine is NOT hashing after .98 flash.

Did a full reset and manually put in all settings, saved, rebooted etc.

4 Jupiters will not hash on .98 - pretty sure I'm not doing anything tarded on my end.

and I assume you are checking by SSH'ing into the miner and checking the status there?

-Redacted-

hero member

Activity: 574

Merit: 501

I made a copy of my working cgminer.conf before I flashed my Jupiters. They wouldn't hash until I restored my saved config files. I don't know what's in the new configs that makes cgminer just hang, but restoring the old copies fixed them.

WastedLTC

hero member

Activity: 778

Merit: 563

Quote from: ?? on ??

So, I put .98 on all my Jupiters and rebooted.. now not 1 of them will connect to Eligius. I reset/rebooted everything. Lovely.

Eligius just had a few issues. Retry now... for a few moments my miners lost connection

FeedbackLoop

hero member

Activity: 742

Merit: 500

Quote from: ?? on ??

So, I put .98 on all my Jupiters and rebooted.. now not 1 of them will connect to Eligius. I reset/rebooted everything. Lovely.

Same here.

jelin1984

legendary

Activity: 2408

Merit: 1004

Hahah go knc go

WastedLTC

hero member

Activity: 778

Merit: 563

difficulty, nowhere but up!

Someone sent BFL a million bucks in one transaction...
http://kryptonews.com/?p=68

xuemike

member

Activity: 116

Merit: 10

0.98 is pretty damn good, 1 jumped 30gh, other 2 jumped 20

basically got a free BFL single and then some.

CYPER

hero member

Activity: 812

Merit: 502

Quote from: The Avenger on October 29, 2013, 11:28:51 AM

Quote from: CYPER on October 29, 2013, 10:43:03 AM

Does anyone know if my miners have been collected/shipped today or yesterday?

Sorry Cyper, they are bs-ing you if they said this meant it was shipped. I had the same situation. Shipping info recieved only means dhl have been informed. Tomorrow you will get the "Shipment picked up" in the morning. Then the day after it should be delivered. So prob it will arrive on the 31st

I am at disbelief at the level of misinformation and false claims repeatedly made by KNC support staff.
And I wonder who benefits from such a way of conducting business Huh

It's definitely not me.

I was told yesterday noon (28.10) that my miners are ready and waiting to be picked up same day.
It turns out they will most probably not going to be picked up today either.

And as usual nobody is picking up the phone.

FeedbackLoop

hero member

Activity: 742

Merit: 500

Just reporting on the long averages from my hot Jupiter experiment:

Setting:
open case
two front boards cooler fans off and replaced by case fans at a 5 cm distance
temperatures reported ranging from ~50 front boards (48.5 one of them...) to high 50s 60 back boards
FW 0.95 KNC cgminer

previous Results:
Previous open case with good cooling ~500 GH/s at eligius 12 hour average
17 off cores overall as reported by bertmod
15 to 16% HW

Now:
~ 530 GH/s at eligius 12 hour average
2 off cores reported by bertmod
4.5% HW

No pressure applied.

Going for 0.98 now.

Cheers!

FiatKiller

sr. member

Activity: 378

Merit: 250

WU is dropping again, but going to let it ride. Going to be hard to know the ultimate effects because I just brought a BFL30 online yesterday also. Shockingly, I am in the Top 20 on my pool now.

trepex

sr. member

Activity: 266

Merit: 250

Saturn: 0.97 & manual cgminer 3.6.6 installation vs. 0.98
cgminer avg. hashrate: 269.5 vs. 279-280
Power usage @230V: 280W vs. 305W
Temperatures: +3C
HW error rate: 7.5% vs. 2.5%

Great! I am happy. 9GH for 25W sounds Ok. Better than my Jalapeno Cheesy

jelin1984

legendary

Activity: 2408

Merit: 1004

Which pool you used?

Kneedle

newbie

Activity: 28

Merit: 0

Wow, for the first time my CGMiner average matches the pool average, and both are up considerably. On previous firmware, my speed on the pool would float between 500 and 550, but was generally in the middle - 525~. CGMiner generally reported 540-545. Now both are reporting ~567, and have been for a couple hours. Bravo KNC Grin

I did see an increase of ~75 watts from the wall, but I'm not complaining.

Kneedle

naRky

sr. member

Activity: 350

Merit: 250

Bitcoin is the future...

went from 0.95 to 0.98

0.95
545GH/s
570W
1.9% HW error

0.98 running 1h
565GH/s
630W
2% HW error

semaster

sr. member

Activity: 395

Merit: 250

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

0.98 Caused one of my GUI interfaces to report 0 gh/s, when cgminer is going fine, and the pool is reporting it fine....? anyone else?
cold restart fixed it...

xyzzy099

legendary

Activity: 1066

Merit: 1098

Quote from: ASIC-K on October 29, 2013, 11:08:57 AM

stupid question, but i just switched to eligius, where can i see if i have solved a block or not? lol

http://eligius.st/~wizkid057/newstats/blocks.php

ASIC-K

sr. member

Activity: 280

Merit: 250

Hell?

Quote from: lindeanin on October 29, 2013, 11:30:05 AM

Quote from: ASIC-K on October 29, 2013, 11:08:57 AM

stupid question, but i just switched to eligius, where can i see if i have solved a block or not? lol

Not all pools show it. I know Slush does, as I found one already half year ago in 1st day of mining

ok thanks!

dwdoc

legendary

Activity: 966

Merit: 1000

- - -Caveat Aleo- - -

Going from 0.97 to 0.98
One Jupiter went from 420 to 580GH
One went from 500 to 550
And one stayed at 500

lindeanin

full member

Activity: 161

Merit: 100

Quote from: ASIC-K on October 29, 2013, 11:08:57 AM

stupid question, but i just switched to eligius, where can i see if i have solved a block or not? lol

Not all pools show it. I know Slush does, as I found one already half year ago in 1st day of mining

Topic: Swedish ASIC miner company kncminer.com - page 1188. (Read 3049528 times)