My ASIC run better with casing, but the temp is quite high with casing on.
Is 70C Safe for my ASIC?
Thank You
Is 70C Safe for my ASIC?
Thank You
Probably - 105 is upper limit
Topic: Swedish ASIC miner company kncminer.com - page 1190. (Read 3049528 times)
Probably - 105 is upper limit
My ASIC run better with casing, but the temp is quite high with casing on.
Is 70C Safe for my ASIC?
Thank You
Is 70C Safe for my ASIC?
Thank You
OMG my Jupiters are flying with 0.98, the ones that struggled to reach 500GH/s at the pool are now well above 550GH/s after aprox. 30 minutes
Jupiter upgrade from .97 to .98.
Watts at the wall increase from 597 at the wall to 674 at the wall.
Performance increased from ~545 GH/s to ~565 GH/s.
Hardware errors decreased from 4.7% to 1.2%.
No real change in temps.
Great upgrade!
Watts at the wall increase from 597 at the wall to 674 at the wall.
Performance increased from ~545 GH/s to ~565 GH/s.
Hardware errors decreased from 4.7% to 1.2%.
No real change in temps.
Great upgrade!
Mercury upgraded from .97 (138GH/s) to .98 after 2 hours (141GH/s). Temps are 1-2 degrees hotter but nothing alarming. Seems like they are moving in the right direction with this one for sure! Couldn't be more pleased with KNC.
This is the ONE.
Have 2 jupiters.
One used to hash at 534 with HW+R 3.2% and the other at 544 with HW+R 2.8%.
Now both of them stabled at 569 with HW+R at 1.3% and 1.5%.
Wattage is indeed higher from 472 and 482 to 537 and 539W.
I have 4 cores off on both machine.
Now I am waiting to see the 3 hours average increase on Eligius before congratulating KNC.
Have 2 jupiters.
One used to hash at 534 with HW+R 3.2% and the other at 544 with HW+R 2.8%.
Now both of them stabled at 569 with HW+R at 1.3% and 1.5%.
Wattage is indeed higher from 472 and 482 to 537 and 539W.
I have 4 cores off on both machine.
Now I am waiting to see the 3 hours average increase on Eligius before congratulating KNC.
Just upgraded. I'm getting about a 1-1.5% increase in hashrate, but my unit was at the top of the performance range anyway, 280 for a Saturn, equivalent to 560 for a Jupiter. Now I'm getting 282-283.
Quick update
0.97 - 500-508GH/s for all 3 Jupiter (with the Cgminer updates applied)
0.98 - 560-570GH/s for all 3
0.97 - 500-508GH/s for all 3 Jupiter (with the Cgminer updates applied)
0.98 - 560-570GH/s for all 3
seen twice now - when upgrading, clock resets to 01.01.2000
when it refreshes to todays date and time - Avg. HR & WU both drop to zero & cgminer shows avg HR as 1.683Mh/s
Restarting the PSU after date/time refresh seems to sort it
Now its stabilizing around 570 Gh/s
WU has risen from 7700 to 7986
582W with 100% cores enabled
so far so good
when it refreshes to todays date and time - Avg. HR & WU both drop to zero & cgminer shows avg HR as 1.683Mh/s
Restarting the PSU after date/time refresh seems to sort it
Now its stabilizing around 570 Gh/s
WU has risen from 7700 to 7986
582W with 100% cores enabled
so far so good
steady at 145ghs mercury. very very low hw errors. most stable and fastest performance yet.
Jupiter Wall Stats.
738 Watts to 747.4 Watts
76.18 Kw/h
248.8 v
2.9-3.0 A
738 Watts to 747.4 Watts
76.18 Kw/h
248.8 v
2.9-3.0 A
Installed 9.8 FM. So far hashrate is a record high and HW errors are a record low BUT WU dropped by 300. Not sure if this is better or not. Too early to say. Running a bit warmer also.
anyone has a meter for his Jupiter, only ?
seems like higher electricity consumption, but I can't tell exactly as I have several other devices connected to my one
+80 Watts at the wall. seems like higher electricity consumption, but I can't tell exactly as I have several other devices connected to my one
anyone has a meter for his Jupiter, only ?
seems like higher electricity consumption, but I can't tell exactly as I have several other devices connected to my one
seems like higher electricity consumption, but I can't tell exactly as I have several other devices connected to my one
My Saturn went to 315 W from 295 W with 0.98fw
and your hashrate increased?
0.95. to 0.98
Temps up a couple of Degrees.
Watts at Wall 747 up about 80.
557Gh/s Average (Higher at Pool, but waiting on more Shares to get better picture).
HW errors down from 1.4 to Less than 0.5.
Looking good, but more electricity.
Temps up a couple of Degrees.
Watts at Wall 747 up about 80.
557Gh/s Average (Higher at Pool, but waiting on more Shares to get better picture).
HW errors down from 1.4 to Less than 0.5.
Looking good, but more electricity.
Wow , hashrate explosion.....
Form 530 to 575Ghash.
And i was already on 530 with .97 and cgminer 3.6.6 . So there's more to .98 than just cgminer
Form 530 to 575Ghash.
And i was already on 530 with .97 and cgminer 3.6.6 . So there's more to .98 than just cgminer
anyone has a meter for his Jupiter, only ?
seems like higher electricity consumption, but I can't tell exactly as I have several other devices connected to my one
seems like higher electricity consumption, but I can't tell exactly as I have several other devices connected to my one
my saturns runs @ 323w on the wall on .98
in v .95 285w
anyone has a meter for his Jupiter, only ?
seems like higher electricity consumption, but I can't tell exactly as I have several other devices connected to my one
seems like higher electricity consumption, but I can't tell exactly as I have several other devices connected to my one
My Saturn went to 315 W from 295 W with 0.98fw
and your hashrate increased?
.98 firmware helped! hashing at 144 ghs on my mercury. low hardware errors!
anyone has a meter for his Jupiter, only ?
seems like higher electricity consumption, but I can't tell exactly as I have several other devices connected to my one
seems like higher electricity consumption, but I can't tell exactly as I have several other devices connected to my one
My Saturn went to 315 W from 295 W with 0.98fw
Jump to: