hey guys wake up lol
stop make stories xD
eligius have problem with november jupiter many HW
thats it
Topic: Swedish ASIC miner company kncminer.com - page 858. (Read 3050071 times)
Is there anything I can do to get these cores to work? On board 3 none of the cores work, and on board 2 about 24 out of the 192 cores seem to stay off.
I just got the miner today and when I initially started it up the hashrate climbed up to about 660/670, but later i checked and noticed it was running at about 480GH/s.
https://i.imgur.com/OipHElT.png
I just got the miner today and when I initially started it up the hashrate climbed up to about 660/670, but later i checked and noticed it was running at about 480GH/s.
https://i.imgur.com/OipHElT.png
I also have the same issue. 2 Nov Jupiters, both have their own 1200w PSU.
Both started off at 660+ GH but after 12 hours one unit is at 500GH with all cores disabled on one ASIC board
Tried hard reset, checked connections
Has anybody managed to salvage such a board ?
Thanks
try change pool
eligius have problems witch kncminer
Eligius had some problems lately but i don't think it is only related to knc hw
I personally left Eligius once I learned Luke Jr. used the pool (and thus my hashpower) to execute a 51% attack to destroy an altcoin without my knowledge. I also came across some pretty religiously intolerant posts he made and learned he includes religious text in the blocks Eligius finds which made it easy to switch as well...
i thought they were the same guy?
Is there anything I can do to get these cores to work? On board 3 none of the cores work, and on board 2 about 24 out of the 192 cores seem to stay off.
I just got the miner today and when I initially started it up the hashrate climbed up to about 660/670, but later i checked and noticed it was running at about 480GH/s.
https://i.imgur.com/OipHElT.png
I just got the miner today and when I initially started it up the hashrate climbed up to about 660/670, but later i checked and noticed it was running at about 480GH/s.
https://i.imgur.com/OipHElT.png
I also have the same issue. 2 Nov Jupiters, both have their own 1200w PSU.
Both started off at 660+ GH but after 12 hours one unit is at 500GH with all cores disabled on one ASIC board
Tried hard reset, checked connections
Has anybody managed to salvage such a board ?
Thanks
try change pool
eligius have problems witch kncminer
Eligius had some problems lately but i don't think it is only related to knc hw
I personally left Eligius once I learned Luke Jr. used the pool (and thus my hashpower) to execute a 51% attack to destroy an altcoin without my knowledge. I also came across some pretty religiously intolerant posts he made and learned he includes religious text in the blocks Eligius finds which made it easy to switch as well...
I personally left Eligius once I learned Luke Jr. used the pool (and thus my hashpower) to execute a 51% attack to destroy an altcoin without my knowledge. I also came across some pretty religiously intolerant posts he made and learned he includes religious text in the blocks Eligius finds which made it easy to switch as well...
Now this made my afternoon reading attention span perk up.. do tell more
Is there anything I can do to get these cores to work? On board 3 none of the cores work, and on board 2 about 24 out of the 192 cores seem to stay off.
I just got the miner today and when I initially started it up the hashrate climbed up to about 660/670, but later i checked and noticed it was running at about 480GH/s.
https://i.imgur.com/OipHElT.png
I just got the miner today and when I initially started it up the hashrate climbed up to about 660/670, but later i checked and noticed it was running at about 480GH/s.
https://i.imgur.com/OipHElT.png
I also have the same issue. 2 Nov Jupiters, both have their own 1200w PSU.
Both started off at 660+ GH but after 12 hours one unit is at 500GH with all cores disabled on one ASIC board
Tried hard reset, checked connections
Has anybody managed to salvage such a board ?
Thanks
try change pool
eligius have problems witch kncminer
Eligius had some problems lately but i don't think it is only related to knc hw
I personally left Eligius once I learned Luke Jr. used the pool (and thus my hashpower) to execute a 51% attack to destroy an altcoin without my knowledge. I also came across some pretty religiously intolerant posts he made and learned he includes religious text in the blocks Eligius finds which made it easy to switch as well...
Is there anything I can do to get these cores to work? On board 3 none of the cores work, and on board 2 about 24 out of the 192 cores seem to stay off.
I just got the miner today and when I initially started it up the hashrate climbed up to about 660/670, but later i checked and noticed it was running at about 480GH/s.
https://i.imgur.com/OipHElT.png
I just got the miner today and when I initially started it up the hashrate climbed up to about 660/670, but later i checked and noticed it was running at about 480GH/s.
https://i.imgur.com/OipHElT.png
I also have the same issue. 2 Nov Jupiters, both have their own 1200w PSU.
Both started off at 660+ GH but after 12 hours one unit is at 500GH with all cores disabled on one ASIC board
Tried hard reset, checked connections
Has anybody managed to salvage such a board ?
Thanks
try change pool
eligius have problems witch kncminer
Eligius had some problems lately but i don't think it is only related to knc hw
Is there anything I can do to get these cores to work? On board 3 none of the cores work, and on board 2 about 24 out of the 192 cores seem to stay off.
I just got the miner today and when I initially started it up the hashrate climbed up to about 660/670, but later i checked and noticed it was running at about 480GH/s.
https://i.imgur.com/OipHElT.png
I just got the miner today and when I initially started it up the hashrate climbed up to about 660/670, but later i checked and noticed it was running at about 480GH/s.
https://i.imgur.com/OipHElT.png
I also have the same issue. 2 Nov Jupiters, both have their own 1200w PSU.
Both started off at 660+ GH but after 12 hours one unit is at 500GH with all cores disabled on one ASIC board
Tried hard reset, checked connections
Has anybody managed to salvage such a board ?
Thanks
Take off the top, run it cooler.
Take two aspirins and call us in the morning.
Is there anything I can do to get these cores to work? On board 3 none of the cores work, and on board 2 about 24 out of the 192 cores seem to stay off.
I just got the miner today and when I initially started it up the hashrate climbed up to about 660/670, but later i checked and noticed it was running at about 480GH/s.
https://i.imgur.com/OipHElT.png
I just got the miner today and when I initially started it up the hashrate climbed up to about 660/670, but later i checked and noticed it was running at about 480GH/s.
https://i.imgur.com/OipHElT.png
I also have the same issue. 2 Nov Jupiters, both have their own 1200w PSU.
Both started off at 660+ GH but after 12 hours one unit is at 500GH with all cores disabled on one ASIC board
Tried hard reset, checked connections
Has anybody managed to salvage such a board ?
Thanks
try change pool
eligius have problems witch kncminer
What part of unresponsive do you not understand. I know you are trying to help but please try to read the problem first.
My unit has IP address of 192.168.0.190.
Going to http://192.168.0.190 gets "connection refused".
SSH to 192.168.0.190 gets "connection refused".
The unit never completes booting (red & green lights remain on).
So how exactly would I make sure the mining address is correct if the webpage is unresponsive, hence the report about unresponsive unit.
Now if I (and others with the red & green lights of death) disconnect all ASIC boards you can access the rig by IP address. Of course it doesn't matter.
a) any settings entered are erased when you reboot (yes all mining config info is replaced with an "X" after reboot)
and
b) connecting any mining board (tried each of the 4 individually) returns to same red & green lights of death.
Quote
Hence the word MAY help.
If you continue ridicule me, I will stop giving suggestions.
If you didn't want help or suggestions.... why come here?
With that said....
I had the same problem.
After a couple minutes, the miners do become unresponsive after a few poll attempts...
How I was able to get in, was to be quick about it....timing
When you get the address, waste no time accessing...
When I did it...Sniff & access must be done with a dash of speed, and sometimes repeatedly. They all reacted the same way.
good luck
Remember it took me 18 hours to crack my first miner... Edgar loves that.... lol
*It only takes one character in any field to mess things up.
If you continue ridicule me, I will stop giving suggestions.
If you didn't want help or suggestions.... why come here?
With that said....
I had the same problem.
After a couple minutes, the miners do become unresponsive after a few poll attempts...
How I was able to get in, was to be quick about it....timing
When you get the address, waste no time accessing...
When I did it...Sniff & access must be done with a dash of speed, and sometimes repeatedly. They all reacted the same way.
good luck
Remember it took me 18 hours to crack my first miner... Edgar loves that.... lol
*It only takes one character in any field to mess things up.
Just because you are right is no reason to listen to you!
ROTFLMAO
Same thing here...
People forget that they can have multiple problems which all appear to be the same problem...
On another tack...
The missing heat transfer pads is a cute problem too.
Testing units -- before they leave the plant? Final inspections? Why?
How would that help?
Just asking!
Is there anything I can do to get these cores to work? On board 3 none of the cores work, and on board 2 about 24 out of the 192 cores seem to stay off.
I just got the miner today and when I initially started it up the hashrate climbed up to about 660/670, but later i checked and noticed it was running at about 480GH/s.
https://i.imgur.com/OipHElT.png
I just got the miner today and when I initially started it up the hashrate climbed up to about 660/670, but later i checked and noticed it was running at about 480GH/s.
https://i.imgur.com/OipHElT.png
I also have the same issue. 2 Nov Jupiters, both have their own 1200w PSU.
Both started off at 660+ GH but after 12 hours one unit is at 500GH with all cores disabled on one ASIC board
Tried hard reset, checked connections
Has anybody managed to salvage such a board ?
Thanks
Just update the hardware vs network profitability forcast chart for those who may wish to take a speculative gander at potential returns in the months to come.
20% may be low if hardware that was pre-ordered comes online.
https://docs.google.com/spreadsheet/ccc?key=0AmeuPljmUNHCdEpqX2RmMDFwemJyLURVUWFtZ3J3aGc&usp=sharing
20% may be low if hardware that was pre-ordered comes online.
https://docs.google.com/spreadsheet/ccc?key=0AmeuPljmUNHCdEpqX2RmMDFwemJyLURVUWFtZ3J3aGc&usp=sharing
Upon further inspection of my worst performing Nov Jupiter (500-550GH), I see that I am missing the thermal block for all four boards that goes across the new rear VRM's.
The other Nov Jups that have the thermal blocks are getting 650-700GH+
The other Nov Jups that have the thermal blocks are getting 650-700GH+
Makes me wonder if it's cheap sd cards which have condensation trapped inside the casing when folks are powering them up, since it's cold outside and they're just opening the boxes quickly and connecting power.
Well the stock units don't use a sd card. The sd card slot is empty. BBB has both internal flash memory (2GB IIRC) and a SD card slot. If the internal flash memory is getting corrupted using SD card for image is a workaround. The BBB can boot either from internal memory or SD card.
If you continue ridicule me, I will stop giving suggestions.
If you didn't want help or suggestions.... why come here?
If you didn't want help or suggestions.... why come here?
Well, when he stops giving suggestions, don't worry D&T.. the rest of us will still try to help.
And keep it related to the problem at hand.
So... guess I was waay off.. totally unrelated...
since you are doing so well, you can help him...
and I won't have to read this nonsense anymore.
Last straw.
Anyone who wants my help can PM me from now on.
I've got too much work to do to deal with smart-asses.
Good luck.
I mean, your post certainly didn't even seem in the ballpark when you were talking about stuff which he'd already ruled out. I suppose light-hearted banter is the straw on the camel's back.
If you wanted to be truly helpful, you could provide him with an image of the card, if you had one handy.
Makes me wonder if it's cheap sd cards which have condensation trapped inside the casing when folks are powering them up, since it's cold outside and they're just opening the boxes quickly and connecting power.
If you continue ridicule me, I will stop giving suggestions.
If you didn't want help or suggestions.... why come here?
If you didn't want help or suggestions.... why come here?
Well, when he stops giving suggestions, don't worry D&T.. the rest of us will still try to help.
And keep it related to the problem at hand.
So... guess I was waay off.. totally unrelated...
since you are doing so well, you can help him...
and I won't have to read this nonsense anymore.
Last straw.
Anyone who wants my help can PM me from now on.
I've got too much work to do to deal with smart-asses.
Good luck.
understand yours feelings
yesterday i have same problem beagleboard have filesystem corrupt
yesterday i have same problem beagleboard have filesystem corrupt
This might sound stupid and pointless, but seeing that your machine hashes with 0GH/s you might as well try it: unplug everything, unscrew everything, so the miner is completely disassembled.
Remove everything from the box: controller board, ASIC boards, heatsink. Then remove the heatsinks and if you want re-paste the chip. They assemble everthing back together.
Most probably it will not help, but what do you have to lose?
Remove everything from the box: controller board, ASIC boards, heatsink. Then remove the heatsinks and if you want re-paste the chip. They assemble everthing back together.
Most probably it will not help, but what do you have to lose?
Someone just needs to make an image of their functional Jupiter, I'm sure someone can help with that. C'mon folks 
Jump to: