T-Rex 0.23.1
NOTE: this version includes a couple of breaking changes: GPU ordering change and telnet API removal. Make sure you remove your GPU-order specific OC settings from *.bat/*.sh files before updating.
Auto-updates won't be turned on for this version for the same reason.
Users of HiveOS and other mining operating systems that force PCI bus GPU order are unaffected by the GPU-order change.
* New WebUI and API (refer to https://github.com/trexminer/T-Rex/wiki/WebUI on how to set it up):
1. Ability to generate config files
2. Improved API security: optional password and https
3. GPU/memory clock and share difficulty reporting
4. Log viewer
5. Ability to pause GPUs
If you don't like the new WebUI and would prefer to use the old one for any reason, download "webui.zip" from https://github.com/trexminer/T-Rex/releases/download/0.23.1/webui.zip, put it next to t-rex executable, and restart the miner.
* Order GPUs by PCI bus id. You may need to change the settings that relied on GPU order.
* Remove telnet API
* Multiple bug fixes
Topic: T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner - page 18. (Read 174976 times)
after running T-rex latest version for nearly 24hours...I noticed a little more stability on the 3060 LHR and also less mining hopping on the 3070ti.
the 3070ti is running constantly on 56-57mhs...that is really so close to the Non LHR 3070 that I have but with nearly 50more watts
thats so good.
also the miner started with 4 but later in autotuned to LHR3 so and running stable now.
NBminer as it was the first miner that increased the hash rate with the LHR cards, need more power for the same hash rate.
so some more testing with T-rex
the 3070ti is running constantly on 56-57mhs...that is really so close to the Non LHR 3070 that I have but with nearly 50more watts
thats so good.
also the miner started with 4 but later in autotuned to LHR3 so and running stable now.
NBminer as it was the first miner that increased the hash rate with the LHR cards, need more power for the same hash rate.
so some more testing with T-rex
--lhr-tune 4
And how much does the usual 3080 hash give out in this mode and how many watts does it consume?
And how much does the usual 3080 hash give out in this mode and how many watts does it consume?
This always worries of badshare on high OC has chosen that we at gminer 2.66.
I would have to think about looking this way before wanting to debridle restricted cards ... and review your fees because 1% is still too high.
We are not on big OCs yet
3070: 1070/2400/150
I would have to think about looking this way before wanting to debridle restricted cards ... and review your fees because 1% is still too high.
We are not on big OCs yet
3070: 1070/2400/150
trexminer
if you can, add please claymore ethman support
if you can, add please claymore ethman support
Hello.
Does anyone know if it is best to let T-Rex Miner auto define the Intensity and Kernel Values or should we set one ourselves?
Does anyone know if it is best to let T-Rex Miner auto define the Intensity and Kernel Values or should we set one ourselves?
I set it myself. I noticed that 22 intensity vers. 20 -i had no difference as far as hashrate goes on my 1660ti's ect. And I go through each card to see what is the best hashrate for each Kernel.
Thanks for the explanation!
Hello.
Does anyone know if it is best to let T-Rex Miner auto define the Intensity and Kernel Values or should we set one ourselves?
Does anyone know if it is best to let T-Rex Miner auto define the Intensity and Kernel Values or should we set one ourselves?
I set it myself. I noticed that 22 intensity vers. 20 -i had no difference as far as hashrate goes on my 1660ti's ect. And I go through each card to see what is the best hashrate for each Kernel.
Hello.
Does anyone know if it is best to let T-Rex Miner auto define the Intensity and Kernel Values or should we set one ourselves?
Does anyone know if it is best to let T-Rex Miner auto define the Intensity and Kernel Values or should we set one ourselves?
On other forum ppl report that 3080ti gives 90-95MH\s in LHR-4 mode, no data about powerdraw though
I have a 3080ti, and Im getting the same 80-ish mh/s that I was getting on NBMiner
And how much does the usual 3080 hash give out in this mode and how many watts does it consume?
On other forum ppl report that 3080ti gives 90-95MH\s in LHR-4 mode, no data about powerdraw though
I have a 3080ti, and Im getting the same 80-ish mh/s that I was getting on NBMiner
T-Rex 0.22.1
* (ethash) Add partial LHR unlock functionality for 30xx cards. Refer to https://github.com/trexminer/T-Rex/blob/master/LHR.md for more details.
* Add firopow algorithm for upcoming FIRO hard fork.
* (kawpow) Add CPU share validation functionality for all progpow-like algorithms
* Add compatibility with CentOS 7
Bug fixes:
* (octopus) CFX mining is broken in 0.22.0
* (autolykos2) CPU share validation is broken
* Switching to failover pools takes too long
* Stability fixes
* (ethash) Add partial LHR unlock functionality for 30xx cards. Refer to https://github.com/trexminer/T-Rex/blob/master/LHR.md for more details.
* Add firopow algorithm for upcoming FIRO hard fork.
* (kawpow) Add CPU share validation functionality for all progpow-like algorithms
* Add compatibility with CentOS 7
Bug fixes:
* (octopus) CFX mining is broken in 0.22.0
* (autolykos2) CPU share validation is broken
* Switching to failover pools takes too long
* Stability fixes
waiting for 3060 12GB v1 unlock eth mining update.
I use trex all my nvidia rigs (3060ti, 3070, 3080, 3090 all not LHR.) except 3060 12GB v1.
miniZ isnt good for 3060 12GB v1. there so many rejected shares.
lolminer is the best one for 3060 12GB v1.
Now if there was only a way to lower power draw...
https://www.youtube.com/watch?v=d1z4saNLjPg - 3070 Ti is hungry
https://www.youtube.com/watch?v=d1z4saNLjPg - 3070 Ti is hungry
We'll implement it in future releases.
On other forum ppl report that 3080ti gives 90-95MH\s in LHR-4 mode, no data about powerdraw though
Now if there was only a way to lower power draw...
https://www.youtube.com/watch?v=d1z4saNLjPg - 3070 Ti is hungry
https://www.youtube.com/watch?v=d1z4saNLjPg - 3070 Ti is hungry
T-Rex 0.22.1
* (ethash) Add partial LHR unlock functionality for 30xx cards. Refer to https://github.com/trexminer/T-Rex/blob/master/LHR.md for more details.
* Add firopow algorithm for upcoming FIRO hard fork.
* (kawpow) Add CPU share validation functionality for all progpow-like algorithms
* Add compatibility with CentOS 7
Bug fixes:
* (octopus) CFX mining is broken in 0.22.0
* (autolykos2) CPU share validation is broken
* Switching to failover pools takes too long
* Stability fixes
* (ethash) Add partial LHR unlock functionality for 30xx cards. Refer to https://github.com/trexminer/T-Rex/blob/master/LHR.md for more details.
* Add firopow algorithm for upcoming FIRO hard fork.
* (kawpow) Add CPU share validation functionality for all progpow-like algorithms
* Add compatibility with CentOS 7
Bug fixes:
* (octopus) CFX mining is broken in 0.22.0
* (autolykos2) CPU share validation is broken
* Switching to failover pools takes too long
* Stability fixes
They are going to change their algorithm to firopow in a few weeks, so the problem will go away 
Hashrates are gonna be x100?
Firo's hashrate is still in MH\s for individual cards - it's not practial...
They are going to change their algorithm to firopow in a few weeks, so the problem will go away
Firo's hashrate is still in MH\s for individual cards - it's not practial...
T-Rex 0.22.1
* (ethash) Add partial LHR unlock functionality for 30xx cards. Refer to https://github.com/trexminer/T-Rex/blob/master/LHR.md for more details.
* Add firopow algorithm for upcoming FIRO hard fork.
* (kawpow) Add CPU share validation functionality for all progpow-like algorithms
* Add compatibility with CentOS 7
Bug fixes:
* (octopus) CFX mining is broken in 0.22.0
* (autolykos2) CPU share validation is broken
* Switching to failover pools takes too long
* Stability fixes
* (ethash) Add partial LHR unlock functionality for 30xx cards. Refer to https://github.com/trexminer/T-Rex/blob/master/LHR.md for more details.
* Add firopow algorithm for upcoming FIRO hard fork.
* (kawpow) Add CPU share validation functionality for all progpow-like algorithms
* Add compatibility with CentOS 7
Bug fixes:
* (octopus) CFX mining is broken in 0.22.0
* (autolykos2) CPU share validation is broken
* Switching to failover pools takes too long
* Stability fixes
hi there. i am new in cryptomining.
I have 3060ti and use windows. Want to mine etherium in etherpool(europe). What is the correct command to use and after that where to see what i have mined ?
thanks
Ask on t-rex discord. I have 3060ti and use windows. Want to mine etherium in etherpool(europe). What is the correct command to use and after that where to see what i have mined ?
thanks
hi there. i am new in cryptomining.
I have 3060ti and use windows. Want to mine etherium in etherpool(europe). What is the correct command to use and after that where to see what i have mined ?
thanks
I have 3060ti and use windows. Want to mine etherium in etherpool(europe). What is the correct command to use and after that where to see what i have mined ?
thanks
Jump to: