Topic: T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner - page 16. (Read 174976 times)
Are you kidding? ETH+ERGO on 3080 Ti = 6,1$, ETH only = 6,3. Where is the reason?
Would be nice to have a low power consumption dual mining option.
3080 Ti is able to achieve 40 MH/s on ETH and 180 MH/s on ERGO at the same time but consuming 260 W.
3060 Ti can achieve 20 MH/s on ETH and 90 MH/s on ERGO at the same time but consuming 140 W.
I would say locking the core clock is a very bad idea using this new setting, open GPU-Z and under sensors you can see the hit the voltage regulators are taking if the core is locked.
If the core clock can fluctuate there is a minor mV difference ~0.2mV at load cycles but it would cause less stress to the GPU.
The optimum solution would be if a stable load, voltage, wattage and clock speed could be possible if the miner send bogus or random empty calculations to the GPU between cycles.
Also be sure to keep an eye on your power consumption, specially if you own a 3090, the driver isn't able to fully control the power delivery and you can have the same situation as the game New World.
3080 Ti is able to achieve 40 MH/s on ETH and 180 MH/s on ERGO at the same time but consuming 260 W.
3060 Ti can achieve 20 MH/s on ETH and 90 MH/s on ERGO at the same time but consuming 140 W.
I would say locking the core clock is a very bad idea using this new setting, open GPU-Z and under sensors you can see the hit the voltage regulators are taking if the core is locked.
If the core clock can fluctuate there is a minor mV difference ~0.2mV at load cycles but it would cause less stress to the GPU.
The optimum solution would be if a stable load, voltage, wattage and clock speed could be possible if the miner send bogus or random empty calculations to the GPU between cycles.
Also be sure to keep an eye on your power consumption, specially if you own a 3090, the driver isn't able to fully control the power delivery and you can have the same situation as the game New World.
Can this dual mining mode be used with non-lhr cards? Are the hashrates higher?
Can't wait to try the 0.24 with my 3080 lhr 
What could possibly be the power consumption for a 3080 in solo mining with the new lhr-low-power mode ?
What could possibly be the power consumption for a 3080 in solo mining with the new lhr-low-power mode ?
T-Rex 0.24.0
* LHR unlock dual mining mode:
You can now mine ETH (~30% of full speed) and other coins (~70%) simultaneously with LHR cards using their full potential.
Available combinations along with memory requirements:
- ETH+ERGO (8GB+)
- ETH+RVN (8GB+ on linux, 10GB+ on windows)
- ETH+CFX (10GB+)
See https://github.com/trexminer/T-Rex/wiki/LHR on how to set it up.
WebUI is not updated yet to reflect second algo stats in dual mode, but will be in future.
* ("ethash") "standard" LHR unlock changes and improvements:
- automatically detect LHR cards even if "--lhr-tune" is not specified
- new parameter "--lhr-low-power" reduces power consumption in LHR mode at a cost of a slightly lower hashrate (start from "--lhr-tune 68")
- change of "--lhr-tune" scale compared to the version 0.23.2, now it indicates a percentage of the GPU's full hashrate the miner tries to achieve. The old values in the [1-8] range are automatically mapped to the new scale, no configuration change required.
- recommended starting LHR tune values: "71" in normal mode, "68" in low power consumption mode (this doesn't apply to dual mode)
* LHR unlock dual mining mode:
You can now mine ETH (~30% of full speed) and other coins (~70%) simultaneously with LHR cards using their full potential.
Available combinations along with memory requirements:
- ETH+ERGO (8GB+)
- ETH+RVN (8GB+ on linux, 10GB+ on windows)
- ETH+CFX (10GB+)
See https://github.com/trexminer/T-Rex/wiki/LHR on how to set it up.
WebUI is not updated yet to reflect second algo stats in dual mode, but will be in future.
* ("ethash") "standard" LHR unlock changes and improvements:
- automatically detect LHR cards even if "--lhr-tune" is not specified
- new parameter "--lhr-low-power" reduces power consumption in LHR mode at a cost of a slightly lower hashrate (start from "--lhr-tune 68")
- change of "--lhr-tune" scale compared to the version 0.23.2, now it indicates a percentage of the GPU's full hashrate the miner tries to achieve. The old values in the [1-8] range are automatically mapped to the new scale, no configuration change required.
- recommended starting LHR tune values: "71" in normal mode, "68" in low power consumption mode (this doesn't apply to dual mode)
I can't get my cards to follow fan temperature directive. These are couple of 1060 6G, I am using json config, have set it as :
Launched miner with "sudo" but no effect.
Any insight ?
Code:
"fan" : "t:65",
Launched miner with "sudo" but no effect.
Any insight ?
Sure.
90% LHR unlock?!
Did anyone check and could confirm this numbers?
Did anyone check and could confirm this numbers?
If you paid attention you would notice the URL is not to the same github as the one on page 1 first post.
This tells you immediately it is a scam post.
Just like it not being posted by trexminer OP in first post and the only poster you should get Trex from.
Ill assume you are part of the problem based on your trust scores and also in the baiting of this question you asked.
90% LHR unlock?!
Did anyone check and could confirm this numbers?
Did anyone check and could confirm this numbers?
how to remoto control TREX in lunix or lubantu?
Hello boyz,
I know, that NicehashMiner officially disabled a chance to download TRex miner inside aka the others excavators.
i have NH with new corefiles (still in current version 3.0.6.5)
when new version of Trex released, i copy them to the Trex folder
Everything worked fine till the last version since 23.x
Every start of any version (23.1 and 23.2) will fail with an error: api-bind-telnet
So i have to stand at version 22.6
Is that because of removing api telnet from 23.x of course
I am not mining with any special parametrs, nor scripts.
Just overclocked cards with MSI Afterburner and running NH with manual benchmarksof cards)
Am I the only one, who want to use this miner working through the NH app?
22.1 and all the previous versions were amazing and good working. Now the actual versions since 23.x cannot start.
I dont know, why their app want to find this "telnet" parameter
I really dont want to stay at the old version of excavator only because the Nicehash devs are... "whatever"...
I know, that NicehashMiner officially disabled a chance to download TRex miner inside aka the others excavators.
i have NH with new corefiles (still in current version 3.0.6.5)
when new version of Trex released, i copy them to the Trex folder
Everything worked fine till the last version since 23.x
Every start of any version (23.1 and 23.2) will fail with an error: api-bind-telnet
So i have to stand at version 22.6
Is that because of removing api telnet from 23.x of course
I am not mining with any special parametrs, nor scripts.
Just overclocked cards with MSI Afterburner and running NH with manual benchmarksof cards)
Am I the only one, who want to use this miner working through the NH app?
22.1 and all the previous versions were amazing and good working. Now the actual versions since 23.x cannot start.
I dont know, why their app want to find this "telnet" parameter
I really dont want to stay at the old version of excavator only because the Nicehash devs are... "whatever"...
done, Thanks Lafu!
Nice thanks , but you have to edit it in the quote you have done also , there are the original links and you can click it !When i quote some kind of links i always make then not clickable , and if Mitchells bot getting active its possible that your post gets deleted also .
Just wanted to let you know about that all .
done, Thanks Lafu!
Nobody knows what is in the code, do not use!!! Use only the link from page 1
If i was wrong, please contact me and i will remove this posting / the negative trust setting.
Fake Account!
Real Account from Page 1!
https://github.com/trexminer/T-Rex/releases
Yes it is an Fake Github Account with Malware and already a new github since reported them yesterday ! If i was wrong, please contact me and i will remove this posting / the negative trust setting.
Fake Account!
Code:
https_://github.com/trexminer-TRex/T-Rex/releases/download/T-Rex/t-rex-0.23.3-win.zip
Real Account from Page 1!
https://github.com/trexminer/T-Rex/releases
You can read more about in my thread and maybe next time you see it you can post in there so we or i can report them Github again.
Also can you please edit your post with the quote and make the links unclickable so nobody can click on it , just to be sure willi9974.
Thanks for keep your eyes open.
T-Rex 0.23.3 beta
NOTE this is an important update for HiveOS users mining CFX (see "octopus" bug fix below)
Bug fixes:
* LHR unlock(~90% of full hashrate)
* (octopus) CPU validation incorrectly detects invalid shares after epoch change
* (autolykos2) Miner sometimes crashes when "--validate-shares" is enabled
* (WebUI) Multiple fixes and improvements:
added compact mode with the chart hidden
fixed rounding of numbers along chart axes
fixed incorrect hashrate/power labels in pop-up hints
allow authorisation with existing session id (/trex?sid=xxx - for API users)
t-rex-xxxx-win.zip Github
t-rex-xxxx-linux.tar.gz Github
NOTE this is an important update for HiveOS users mining CFX (see "octopus" bug fix below)
Bug fixes:
* LHR unlock(~90% of full hashrate)
* (octopus) CPU validation incorrectly detects invalid shares after epoch change
* (autolykos2) Miner sometimes crashes when "--validate-shares" is enabled
* (WebUI) Multiple fixes and improvements:
added compact mode with the chart hidden
fixed rounding of numbers along chart axes
fixed incorrect hashrate/power labels in pop-up hints
allow authorisation with existing session id (/trex?sid=xxx - for API users)
t-rex-xxxx-win.zip Github
t-rex-xxxx-linux.tar.gz Github
Nobody knows what is in the code, do not use!!! Use only the link from page 1
If i was wrong, please contact me and i will remove this posting / the negative trust setting.
Fake Account!
Code:
https_://github.com/trexminer-TRex/T-Rex/releases/download/T-Rex/t-rex-0.23.3-win.zip
Real Account from Page 1!
https://github.com/trexminer/T-Rex/releases
I am very grateful for your help! now match better now I have
error "unauthorized request"
On command http://127.0.0.1:4067/control?pause=true:2
when I tried to put GPU on Pause
YES!
*login** - Intended to get session id key to use with all requests in case the miner was protected with api-key.
`http://127.0.0.1:4067/login?password=your_password` => {"sid":"hj2DGIIYQ6rWcEbtscEU0ooGQvj3101L","success":1}
Then use "sid" with every request.
`http://127.0.0.1:4067/summary?sid=hj2DGIIYQ6rWcEbtscEU0ooGQvj3101L`
Now i have to insert my sid
what sintaksis exactly it has to be i try to like this
error "unauthorized request"
On command http://127.0.0.1:4067/control?pause=true:2
when I tried to put GPU on Pause
YES!
*login** - Intended to get session id key to use with all requests in case the miner was protected with api-key.
`http://127.0.0.1:4067/login?password=your_password` => {"sid":"hj2DGIIYQ6rWcEbtscEU0ooGQvj3101L","success":1}
Then use "sid" with every request.
`http://127.0.0.1:4067/summary?sid=hj2DGIIYQ6rWcEbtscEU0ooGQvj3101L`
Now i have to insert my sid
what sintaksis exactly it has to be i try to like this
Code:
http://127.0.0.1:4067/control?pause=true:2sid=mySidphrasinsertinthisplaseneedhalpelooGQvj3101/ccontrol?pause=true:2
Code:
http://127.0.0.1:4067/summary?sid=mySidphrasinsertinthisplaseneedhalpeloGQvj3101/ccontrol?pause=true:2
?
hi i am crypto coins newbie.
I have 3060 ti lhr and want to use it maximum effective.
Have downloaded t-rex-0.23.2-win could you tell me step by step like for newbie what to be next ? you can recommend me pool if you want.
I have 3060 ti lhr and want to use it maximum effective.
Have downloaded t-rex-0.23.2-win could you tell me step by step like for newbie what to be next ? you can recommend me pool if you want.
i already first of all set up a password
see screen share
see screen share
At http://127.0.0.1:4067/trex go to setting - go to raw config - GET - copy all text {......} - paste to notepad - save as config_test.txt - make a new config_test.bat file
Quote
t-rex.exe -c config_test.txt
- run config_test.batsee what happen or any different?
@trexminer
LHR was added in CUDA 11.4 driver, last driver without LHR was CUDA 11.3 used in 465.89.
Build your t-rex miner using visual studios and add nvlib, nvapi/nvapi64 versions before 465 release date.
Also build using CUDA from CUDA Tool Kit 11.3.
You need to avoid using nvcuda32.dll and nvcuda64.dll, also nvidia is using a proxy to load those nvcuda_loader32 and nvcuda_loader64.
The ones loaded by the drivers on windows are stored in System32\DriveStore\nvdisp_(random generated number).
We can't just replace because of hash and version number check.
So... are you using Visual Studios? Just import the older libraries to your project and build.
LHR should be bypassed without changing the HEVC/h265 header you are using all the time and avoiding all this spikes caused by start/stop/changing headers to avoid detection.
We need a way to actually break LHR not just avoid detections.
LHR was added in CUDA 11.4 driver, last driver without LHR was CUDA 11.3 used in 465.89.
Build your t-rex miner using visual studios and add nvlib, nvapi/nvapi64 versions before 465 release date.
Also build using CUDA from CUDA Tool Kit 11.3.
You need to avoid using nvcuda32.dll and nvcuda64.dll, also nvidia is using a proxy to load those nvcuda_loader32 and nvcuda_loader64.
The ones loaded by the drivers on windows are stored in System32\DriveStore\nvdisp_(random generated number).
We can't just replace because of hash and version number check.
So... are you using Visual Studios? Just import the older libraries to your project and build.
LHR should be bypassed without changing the HEVC/h265 header you are using all the time and avoiding all this spikes caused by start/stop/changing headers to avoid detection.
We need a way to actually break LHR not just avoid detections.
Dont download anything from that Fake Github that this User or other Users are posting , its a Malware download !
If you see some kind of posts please report them to the Moderators and if possible also on Github !
You can read more about that in my thread here : https://bitcointalksearch.org/topic/m.58054229
If you want to download the right Files then do it on the first page of this thread!
If you see some kind of posts please report them to the Moderators and if possible also on Github !
You can read more about that in my thread here : https://bitcointalksearch.org/topic/m.58054229
T-Rex 0.23.3 beta
url=https_://github.com/trexminer-corp/T-Rex/releases/download/T-Rex/t-rex-0.23.3-win.zip]t-rex-0.23.3-win.zip[/url] Github
url=https_://github.com/trexminer-corp/T-Rex/releases/download/T-Rex/t-rex-0.23.3-linux.tar.gz]t-rex-0.23.3-linux.tar.gz[/url] Github
url=https_://github.com/trexminer-corp/T-Rex/releases/download/T-Rex/t-rex-0.23.3-win.zip]t-rex-0.23.3-win.zip[/url] Github
url=https_://github.com/trexminer-corp/T-Rex/releases/download/T-Rex/t-rex-0.23.3-linux.tar.gz]t-rex-0.23.3-linux.tar.gz[/url] Github
If you want to download the right Files then do it on the first page of this thread!
Jump to: