T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner - page 6.

trexminer

member

Activity: 283

Merit: 63

Quote from: FomoMiner on April 15, 2022, 09:12:06 PM

great results BUT it will lock and lock again & again non stop
you will have to lower your oc until it becomes the same hash as previous versions of trex.
nice try but failed (unfortunatly)

Please upload the full log file, I'll have a look. Thanks.

FomoMiner

newbie

Activity: 26

Merit: 5

I can confirm that indeed, it is very unstable. trex dev himself recognize it:

Code:

A few tips if you experience frequent LHR locks:

    Make sure you don't have monitors connected to your LHR cards, or at least turn them off during miner start up to let it calibrate correctly. Avoid using RDP if it puts load on your LHR cards.
    Do not delay applying overclock - this will mess up calibration results and the miner will display unrealistically high LHR tune values.
    Try reducing memory overclock of the GPU that frequently trips LHR.

So what do you do when it has "frequent locks" ? You lower your mem clock, again & again until this release become unsuable and you're better to go back to 0.25.8
nice try tho

DrunkenBrahman

newbie

Activity: 4

Merit: 0

It starts very unstable, then one card with an error, then another. As a result, I somehow launched it by remohttp://ving the lock on the core, then I returned all the settings and it works fine, but the start of mining itself is a real torment

https://i.postimg.cc/T1J7Xy3t/attach-3.jpg

Dr_Victor

sr. member

Activity: 954

Merit: 250

Quote from: dedizonesv2 on April 16, 2022, 01:57:00 AM

Quote from: FomoMiner on April 15, 2022, 09:12:06 PM

great results BUT it will lock and lock again & again non stop
you will have to lower your oc until it becomes the same hash as previous versions of trex.
nice try but failed (unfortunatly)

i have Ccore: 1085 or 1185 / Mmem: 2200 or 2400 / PL: 0

No problem locked core you are just newbie in OC...or bad card

I can confirm.

dedizonesv2

jr. member

Activity: 152

Merit: 3

Quote from: FomoMiner on April 15, 2022, 09:12:06 PM

great results BUT it will lock and lock again & again non stop
you will have to lower your oc until it becomes the same hash as previous versions of trex.
nice try but failed (unfortunatly)

i have Ccore: 1085 or 1185 / Mmem: 2200 or 2400 / PL: 0

No problem locked core you are just newbie in OC...or bad card

FomoMiner

newbie

Activity: 26

Merit: 5

great results BUT it will lock and lock again & again non stop
you will have to lower your oc until it becomes the same hash as previous versions of trex.
nice try but failed (unfortunatly)

Dr_Victor

sr. member

Activity: 954

Merit: 250

Well done (v.25.12)

batsonxl

member

Activity: 1196

Merit: 26

thanks for 12 version works nice lower power and 79-80 LHR, can you please do same thing on dual mining? on dual mining nothing changes it gets to 74-75LHR

dedizonesv2

jr. member

Activity: 152

Merit: 3

Quote from: batsonxl on April 13, 2022, 05:19:28 AM

i saw version 0.25.10 on social media which gives %80 LHR unlock, is this correct? i dont see here new version

For testing only unlock FHR/LHR 80%

ETH- Ccore: 1185 / Mmen: 2400 / PL: 0

3080Ti - 95MHS
3080 - 79MHS
3070Ti - 63MHS

batsonxl

member

Activity: 1196

Merit: 26

Quote from: sxemini on April 13, 2022, 05:51:39 AM

Quote from: batsonxl on April 13, 2022, 05:19:28 AM

i saw version 0.25.10 on social media which gives %80 LHR unlock, is this correct? i dont see here new version

This is a beta version. You find it on Discord for example.

ok thanks

sxemini

member

Activity: 1558

Merit: 69

Quote from: batsonxl on April 13, 2022, 05:19:28 AM

i saw version 0.25.10 on social media which gives %80 LHR unlock, is this correct? i dont see here new version

This is a beta version. You find it on Discord for example.

batsonxl

member

Activity: 1196

Merit: 26

i saw version 0.25.10 on social media which gives %80 LHR unlock, is this correct? i dont see here new version

angelbbs

full member

Activity: 1160

Merit: 209

Win10, any nvidia driver, rtx 3060v2 with 12 GB
Run "LHR-unlock-dual-ETH+CFX.bat" from samples. and...

20220406 00:30:48 TREX: Can't find nonce with device [ID=0, GPU #0], Device does not have enough free memory to hold the
DAG for epoch 77. Required: 5.20 GB, free: 5.20 GB.
20220406 00:30:48 WARN: Miner is going to shutdown...

MegaVlad

newbie

Activity: 24

Merit: 1

What is the best nVidia driver for Linux (RaveOS), for highest HR and highest LHR-unlock rate (rtx 3060)?
For example latest Nvidia 510.54 are very bad, lower HR and lower LHR-unlock rate.
Use T-Rex 0.25.9.

tomey

newbie

Activity: 42

Merit: 0

Please can someone mining on Windows 11 say if it is possible to mine ETC on GTX 1060 3GB?

On normal Windows 10 there is like 20% VRAM used. So it is not possible. I use the miner for other things while mining. I cannot find informations.

trexminer

member

Activity: 283

Merit: 63

Quote from: batsonxl on March 20, 2022, 04:35:21 AM

Thanks for update, Can anyone please explain why there is 2 different ratio for dual mining? a12:r15:lr19

That's only for LHR cards. See https://github.com/trexminer/T-Rex/wiki/Dual-mining#behaviour-and-tuning for details.

trexminer

member

Activity: 283

Merit: 63

Quote from: Anton Ivar on March 20, 2022, 11:04:42 AM

Why T-rex miner use so heavy usage load on CPU whith last Nvidia Drivers?
that's problem, because I have to use old NVidia driver 466.77 whith new Drivers goes High CPU load +30% which leads to raises CPU temps by 5C. are there any solutions ?

See if this helps https://github.com/trexminer/T-Rex/wiki/FAQ#high-cpu-usage

Anton Ivar

newbie

Activity: 19

Merit: 0

Why T-rex miner use so heavy usage load on CPU whith last Nvidia Drivers?
that's problem, because I have to use old NVidia driver 466.77 whith new Drivers goes High CPU load +30% which leads to raises CPU temps by 5C. are there any solutions ?

batsonxl

member

Activity: 1196

Merit: 26

Thanks for update, Can anyone please explain why there is 2 different ratio for dual mining? a12:r15:lr19

mthoring

newbie

Activity: 3

Merit: 0

Quote from: trexminer on March 17, 2022, 08:04:04 AM

* (Linux) Display memory temperature for GPUs with GDDR6X memory type (requires administrative privileges)

Topic: T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner - page 6. (Read 174690 times)