Topic: T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner - page 8. (Read 174999 times)

Hi guys,
I have a 3070 non LHR and 3x 3060Ti LHR, on T-rex my 3070 recognize as a LHR card...
How to disable LHR tuning on my 3070 ?

thanks

have you tried changing/switching the kernels?

I have tried  to change to 74% but locking detected many times then i back to 68%. Hope trex team can develop to 74%. Thanks

Latest version amazing. Can we adjust eth 74% and ALPH to 26%.
Thanks best way use LHR unused space well done.

New T-Rex rocks! Twice more shares than TBM, that I used before. Did 8h test

Could you please add support for solo mining to Ravencoin nodes?

So many users ask about solo-mining with your software there is definitely more money to be made!

T-Rex 0.25.2

* Add blake3 algorithm (Alephium coin)
* Add ETH+ALPH dual mining mode for LHR cards (ETH 68% / ALPH 32% by default)

NOTE: solo mining to Alephium nodes isn't supported

Hello,

i have 3 RTX 3070 2 old ons an 1 LHR card and mining ETH only.
Can somone here share the setting to get the best hashrate & power setting?

--pl
--lock-cclock or --cclock
--mclock
--cv    
--mt
--intensity                

would be cool if you could see some config to compare. Since I had not used the setting like --pl / --cv / --mt / --intensity) yet.

Here my actual config and stats





Best regards
Willi

This is a TLB known error...
In these cards is increasing DAG really a killer...
So speed around 27MHs in this time is OK.
Some poeple reportered speed around 27.5 etc with +100 or +150 OC on Core.
Increasing OC on memory above 600-700 does nothing now...

You can change your card to 1070Ti - these cards are still OK and their speeds are about 31MHs

You should overclock the liquid nitrogen cooled card.

On hiveos, my GTX 1070 make only 27mhs. Before it was always above 30mhs.

How can i get  30mhs?

Hello. Have T-rex option to mine ERG+ZIL? Can anybody give example of config?

Hello t-rex devs,

Over in the Ravencoin Discord we get lots of questions on how to solo mine to a node with t-rex.

Could you please add the necessary code in some release to make this possible? It would be very beneficial to decentralization.


Thanks!

I received my 3080 12GB FTW EVGA Card.

By default it mines ETH at exactly 61.41 MH/s

I don't think it is being recognized as a LHR card.

To force LHR I tried  --lhr-tune  74
But it never settled and kept hunting for a good hash rate.


Next I tried duel mining
As you can see below the card "GPU #3: EVGA RTX 3080 “

----------------------20220122 10:52:12 -----------------------
Mining at us1.ethermine.org:4444 [172.65.218.238], diff: 4.29 G
GPU #0: EVGA RTX 3090     - 122.39 MH/s, [T:48/96C, P:296W, F:82%, E:415kH/W], 3/3 R:0%
GPU #1: RTX 3080          -  93.29 MH/s, [T:56/104C, P:217W, F:87%, E:430kH/W], 4/4 R:0%
GPU #2: Gigabyte RTX 3090 - 122.58 MH/s, [T:49/98C, P:306W, F:94%, E:402kH/W], 4/4 R:0%
GPU #3: EVGA RTX 3080     -  61.50 MH/s, [T:57/76C, P:321W, F:81%, E:192kH/W], 1/1 R:0%
Hashrate: 399.77 MH/s, Shares/min: 3.919 (Avg. 3.38), Avg.P: 1138W, Avg.E: 351kH/W
Uptime: 3 mins 34 secs | Algo: ethash | T-Rex v0.24.8
WD: 3 mins 35 secs, shares: 12/12


-------------------------20220122 10:52:12 --------------------------
Mining at stratum-ergo.flypool.org:3333 [172.65.247.17], diff: 4.00 G
GPU #0: EVGA RTX 3090     - 0.00 H/s, [T:48/96C, P:296W, F:82%, E:0.00H/W]
GPU #1: RTX 3080          - 0.00 H/s, [T:56/104C, P:217W, F:87%, E:0.00H/W]
GPU #2: Gigabyte RTX 3090 - 0.00 H/s, [T:49/98C, P:306W, F:94%, E:0.00H/W]
GPU #3: EVGA RTX 3080     - 0.00 H/s, [T:57/76C, P:321W, F:81%, E:0.00H/W]
Hashrate: 0.00 H/s, Shares/min: 0, Avg.P: 1138W, Avg.E: 0.00H/W
Uptime: 3 mins 34 secs | Algo: autolykos2 | T-Rex v0.24.8

Is there anything else I can try or simply wait for the new versions of Trex for supporting this card in the future.

Why do I have this if I set -T 1800 in config? Does timeout command work?

I have a btc250c motherboard with 12gpus all 1660s and 2060. For some reason i get loads of crashes several times a day... sometimes it runs couple of days straight.  Lots of downtime.
Windows doesn't recover from this crash and doesn't create any dump files.
I'm not running the highest overclocks possible either. It's definitely related to mining.
Tho it didn't happen on any other AM4 cheap motherboards i used with this same cards before, 3 cards on b450 or a320m chipsets.
Screen shots:
https://imgur.com/a/wi1LjLM

Running the latest version fine in only ethash, at 55Mhs.

Hi, i m having problem with my 3070ti LHR with 8gb memory to run in dual mode. dual in ethash and ravencoin.
Getting short in memory, after finishing the dag-file, i got only 2.9Gb memory free, and i need 3.2gb to work in dual-mode.
Pls help.

Hi, I have an Asus TUF 3060 TI LHR, and I would like to know how I can have a dual mine with this card I tried some version of T-rex and Nvidia driver 472.12 with windows 11 but it didn't worked so now I would like to know who could do dual mine especially ETH-Ergo I mean.
Second, I would like to know what is the best OC settings for this card which power which core clock and which memory? I put it here my actual config and I hope you say your mind about my setting.

https://i.ibb.co/QfYWYbC/Screenshot-2021-12-28-182709.png

Windows/Linux/HiveOS, important as we cannot guess??
Maybe OC related as gpu silicone can differ from card to card. Suggest you lower the OC, if possible, of that card, drivers updates?

I have a problem with a RTX 3060 ti,it works great for 1 week or 10 days and then it suddenly gives an error in red "could not initialize cuda".A restart fixes it so it is not a big of a bother but was wondering why was that.I have another rig with 1080 ti and it run flawlessly without problems.

Ps.I don't have the latest version of the miner,maybe is an update problem?