TechnoBit Eastern Europe, BG HEX16A 7 GH/s/Плaтки имoнтaж нa Aвaлoн чип - page 11.

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: Zich on November 28, 2013, 02:41:19 AM

New TP-LINK TL-MR3020 image & cgminer patch is available.

Link : 0.1.0

Quote

0.1.0:

* cgminer Bugfix – detecting HEX boards + memory corruption
* cgminer NEW – Auto detect miners in case of usb errors during detection --set_default_to_a, --set_default_to_b and --set_default_to_c.
The default is hexA – all boards will be detected as Avalon1
* cgminer updated to 3.8.3 rev 7ddb94d6964f2451d2e76f70b069dfdf2b3d4d6f
* cgminer patch to cgminer 3.8.3 rev 7ddb94d6964f2451d2e76f70b069dfdf2b3d4d6f.patch
- various code cleanup and optimization needs to be done
* cgminer pending work to implement nanofury support
* openwrt Web – added config for Auto detect option
* openwrt updated to r38917

todo

* finish cgminer nanofury support
* add cgminer monitor script - done
* stay in sync with official cgminer git and build fresh openwrt images - synced
* add auto frequency adjustment support avalon-auto style - canceled
* add configuration options (voltage and clock) per board based on HEX16A serial number - canceled

HEX16A(Avalon1): Best results 7.4-7.7 Gh/s (16 chips) in terms of stability and clocking are observed at 1460mV core voltage + 480 MHz Clock.

HEX16B(Bitfury): Best results 44.5-45 Gh/s (16 chips) in terms of stability and clocking are observed at 900mV core voltage + 540 Clock.
Do not go above 540 it is not working!

HEX16C(Avalon2): To be tested with 10 chips - 1100mV core voltage + 1500 MHz Clock.

And no more OFF boards or at least less often Wink

Zich

legendary

Activity: 1190

Merit: 1000

New TP-LINK TL-MR3020 image & cgminer patch is available.

Link : 0.1.0

Quote

0.1.0:

* cgminer Bugfix – detecting HEX boards + memory corruption
* cgminer NEW – Auto detect miners in case of usb errors during detection --set_default_to_a, --set_default_to_b and --set_default_to_c.
The default is hexA – all boards will be detected as Avalon1
* cgminer updated to 3.8.3 rev 7ddb94d6964f2451d2e76f70b069dfdf2b3d4d6f
* cgminer patch to cgminer 3.8.3 rev 7ddb94d6964f2451d2e76f70b069dfdf2b3d4d6f.patch
- various code cleanup and optimization needs to be done
* cgminer pending work to implement nanofury support
* openwrt Web – added config for Auto detect option
* openwrt updated to r38917

todo

* finish cgminer nanofury support
* add cgminer monitor script - done
* stay in sync with official cgminer git and build fresh openwrt images - synced
* add auto frequency adjustment support avalon-auto style - canceled
* add configuration options (voltage and clock) per board based on HEX16A serial number - canceled

HEX16A(Avalon1): Best results 7.4-7.7 Gh/s (16 chips) in terms of stability and clocking are observed at 1460mV core voltage + 480 MHz Clock.

HEX16B(Bitfury): Best results 44.5-45 Gh/s (16 chips) in terms of stability and clocking are observed at 900mV core voltage + 540 Clock.
Do not go above 540 it is not working!

HEX16C(Avalon2): To be tested with 10 chips - 1100mV core voltage + 1500 MHz Clock.

marto74

hero member

Activity: 728

Merit: 500

Quote from: quest on November 24, 2013, 05:23:31 PM

Quote from: marto74 on November 23, 2013, 02:44:55 PM

Quote from: fgkrew on November 23, 2013, 01:48:59 PM

Are these boards still being produced?

I need 31 boards, can this be made and delivered in a month?

I have the avalon chips for the boards.

Yes
december delivery will be OK for us

Can you respond to my pm regarding not receiving the promies refund

I'll do it when it is possible for me. But it will be done anyway.
that's all I can say.
Please stay on topic here

quest

sr. member

Activity: 336

Merit: 250

Quote from: marto74 on November 23, 2013, 02:44:55 PM

Quote from: fgkrew on November 23, 2013, 01:48:59 PM

Are these boards still being produced?

I need 31 boards, can this be made and delivered in a month?

I have the avalon chips for the boards.

Yes
december delivery will be OK for us

Can you respond to my pm regarding not receiving the promies refund

fgkrew

member

Activity: 65

Merit: 10

So how should i contact you to agree on the details?

marto74

hero member

Activity: 728

Merit: 500

Quote from: fgkrew on November 23, 2013, 01:48:59 PM

Are these boards still being produced?

I need 31 boards, can this be made and delivered in a month?

I have the avalon chips for the boards.

Yes
december delivery will be OK for us

fgkrew

member

Activity: 65

Merit: 10

Are these boards still being produced?

I need 31 boards, can this be made and delivered in a month?

I have the avalon chips for the boards.

Zich

legendary

Activity: 1190

Merit: 1000

~~Marto, you forget to upload 3.8.2 rev 0ed1828bd47282218c2bb130fd03737ed2c51a5e.patch~~

cgminer 3.8.3 already release

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: loshia on November 20, 2013, 02:50:59 AM

All is good

That is due to hotplug USB disconnect / reconnect events. In old versions they were hidden. Keep mining and do not pay attention to it:)

In old versions OFF line was not shown

Check dmesg or logread and you will see when USB was disconnected reconnected.

Best
PS:
If you are in doubt please do your paid hash rate calc as suggested by kano

https://bitcointalksearch.org/topic/m.3358609

An you will see that all is good Wink

I see, thanks loshia Grin

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: Zich on November 20, 2013, 02:11:17 AM

After run for 2 days, something happen with rev 0.0.7.
I only had 2 HEX16A.

All is good

That is due to hotplug USB disconnect / reconnect events. In old versions they were hidden. Keep mining and do not pay attention to it:)

In old versions OFF line was not shown

Check dmesg or logread and you will see when USB was disconnected reconnected.

Best
PS:
If you are in doubt please do your paid hash rate calc as suggested by kano

https://bitcointalksearch.org/topic/m.3358609

An you will see that all is good Wink

Zich

legendary

Activity: 1190

Merit: 1000

After run for 2 days, something happen with rev 0.0.7.
I only had 2 HEX16A.

marto74

hero member

Activity: 728

Merit: 500

Quote from: eabedry on November 18, 2013, 03:34:57 PM

Quote from: eabedry on November 06, 2013, 10:26:47 AM

Quote from: marto74 on November 06, 2013, 12:56:15 AM

Quote from: eabedry on November 05, 2013, 11:50:56 PM

Quote from: marto74 on November 04, 2013, 03:54:39 AM

Quote from: Zich on November 04, 2013, 03:51:05 AM

Speedy so funny Shocked

Quote

International Nov 04 at 3:36 PM

Hello,

I’m sorry for the delay but we are waiting for instructions from the consigner.

Best regards,

Magdalena Shishkova
International clients specialist
Speedy JSC
0 7001 8001
www.speedy.bg

Enough is enough
I'm going to get it from there and ship it with DHL 12 o'clock
sorry again
I'm going to switch sending out of Europe to UPS or Fexex
As a compensation You'll get 2 nanofuries in your package

Will you being doing this for all shipments currently stuck with speedy.bg?

I received an email saying I need to provide a proforma invoice, but my boards are for personal use. I'm at a loss of what to do now.

Yes , just give me order ref

Order reference TXFEZVMAV.

Thanks!

Is there any update on this? It's taking a long time to get my boards delivered to me.

Finaly i got them back
Will ship tommorrow UPS express

cy8ex

newbie

Activity: 9

Merit: 0

on 6. november he said that my boards are in trough hole assembly and he will update me... but still yet i got no news whats currently up with my order
order reference : TEGHAXVCJ

eabedry

newbie

Activity: 38

Merit: 0

Quote from: eabedry on November 06, 2013, 10:26:47 AM

Quote from: marto74 on November 06, 2013, 12:56:15 AM

Quote from: eabedry on November 05, 2013, 11:50:56 PM

Quote from: marto74 on November 04, 2013, 03:54:39 AM

Quote from: Zich on November 04, 2013, 03:51:05 AM

Speedy so funny Shocked

Quote

International Nov 04 at 3:36 PM

Hello,

I’m sorry for the delay but we are waiting for instructions from the consigner.

Best regards,

Magdalena Shishkova
International clients specialist
Speedy JSC
0 7001 8001
www.speedy.bg

Enough is enough
I'm going to get it from there and ship it with DHL 12 o'clock
sorry again
I'm going to switch sending out of Europe to UPS or Fexex
As a compensation You'll get 2 nanofuries in your package

Will you being doing this for all shipments currently stuck with speedy.bg?

I received an email saying I need to provide a proforma invoice, but my boards are for personal use. I'm at a loss of what to do now.

Yes , just give me order ref

Order reference TXFEZVMAV.

Thanks!

Is there any update on this? It's taking a long time to get my boards delivered to me.

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: Zich on November 18, 2013, 09:32:38 AM

Wow, this is great, with openwrt image 0.0.7, memory usage of cgminer had been constant on 128% & not increasing Shocked

Link TL-MR3020_rev_0.0.7

And a lot more "hidden" improvements

This one never stops Wink

Zich

legendary

Activity: 1190

Merit: 1000

Wow, this is great, with openwrt image 0.0.7, memory usage of cgminer had been constant on 128% & not increasing Shocked

Link TL-MR3020_rev_0.0.7

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: loshia on November 18, 2013, 02:53:37 AM

If you have only HEXA use --enable-hexminera, if you have both A and B --enable-hexminera --enable-hexminerb
and finally if you happen to have C - Avalon2 --enable-hexminerc. Make sure you that you are not using other miners because usb-pooling is disabled and they most probably will not work. Read the chanlog

Thanks loshia Grin

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: Zich on November 18, 2013, 02:47:11 AM

Hi marto, with cgminer version 3.6.4 i use ./configure --enable-hexminer

Now there is HEXMINERA, HEXMINERB & HEXMINERC. Should i use ./configure --enable-hexminera --enable-hexminerb --enable-hexminerc or only --enable-hexminer?

If you have only HEXA use --enable-hexminera, if you have both A and B --enable-hexminera --enable-hexminerb
and finally if you happen to have C - Avalon2 --enable-hexminerc. Make sure you that you are not using other miners because usb-pooling is disabled and they most probably will not work. Read the chanlog

Zich

legendary

Activity: 1190

Merit: 1000

Hi marto, with cgminer version 3.6.4 i use ./configure --enable-hexminer

Now there is HEXMINERA, HEXMINERB & HEXMINERC. Should i use ./configure --enable-hexminera --enable-hexminerb --enable-hexminerc or only --enable-hexminer?

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: Zich on November 17, 2013, 03:03:53 AM

Quote from: loshia on November 16, 2013, 10:52:37 AM

Guys
There is cgminer update posted on Marto's site.
It works great for me
I would like very much to hear your update in case you are using it with tplink

Memory usage 114% now(before is 155%), there is LED configuration now Grin

Hash rate still same

And screen is working Wink

Topic: TechnoBit Eastern Europe, BG HEX16A 7 GH/s/Плaтки имoнтaж нa Aвaлoн чип - page 11. (Read 92636 times)