After 5 hours @ 250 Mhz
Isn't 250 MHz x 16 should be 4000 MHz...
Topic: TechnoBit Eastern Europe, BG HEX16A 7 GH/s/Плaтки имoнтaж нa Aвaлoн чип - page 29. (Read 92636 times)
August 13, 2013, 12:58:10 AM
Isn't 250 MHz x 16 should be 4000 MHz...
August 13, 2013, 12:52:36 AM
After 5 hours @ 250 Mhz
Isn't 250 MHz x 16 should be 4000 MHz...
August 13, 2013, 12:36:42 AM
Loving the results! Keep up the good work!
August 13, 2013, 12:34:44 AM
August 12, 2013, 06:08:14 PM
Nice!
August 12, 2013, 06:07:06 PM
August 12, 2013, 03:54:04 PM
This is miner pass only 
hmmz.. sure? try username without _1
10x
August 12, 2013, 03:40:59 PM
This is miner pass only
hmmz.. sure? try username without _1
August 12, 2013, 03:39:46 PM
This is miner pass only
August 12, 2013, 03:30:05 PM
MARTO74
Your password is visible for btcguild.. Think you should change it.
Your password is visible for btcguild.. Think you should change it.
August 12, 2013, 03:26:51 PM
Testing HEX16
August 12, 2013, 09:44:53 AM
Update
During the weekend We had the chance to test HEX16.
We have some issues with the power supply part of the board.
We managed to run stable @ 200 Mhz for 24 hours.
We are making rework of the pcb design @ the moment in the part of the power supply 1.2V.
Hopefully will have revised board made and populated until Friday.
During the weekend We had the chance to test HEX16.
We have some issues with the power supply part of the board.
We managed to run stable @ 200 Mhz for 24 hours.
We are making rework of the pcb design @ the moment in the part of the power supply 1.2V.
Hopefully will have revised board made and populated until Friday.
Can't wait for revised board test result
August 12, 2013, 04:56:14 AM
Update
During the weekend We had the chance to test HEX16.
We have some issues with the power supply part of the board.
We managed to run stable @ 200 Mhz for 24 hours.
We are making rework of the pcb design @ the moment in the part of the power supply 1.2V.
Hopefully will have revised board made and populated until Friday.
During the weekend We had the chance to test HEX16.
We have some issues with the power supply part of the board.
We managed to run stable @ 200 Mhz for 24 hours.
We are making rework of the pcb design @ the moment in the part of the power supply 1.2V.
Hopefully will have revised board made and populated until Friday.
August 11, 2013, 10:33:49 AM
any update on availability / price of complete miner.
Actually there is no complete miner sold on tecnobit at the moment(maybe later but not now). Technobit only provided PCB production, assembly and test. Chip provided by customer which majority from group buy.
Like me, i had 20 chip so i will buy 2 unit HEX 16A from tecnobit.
August 11, 2013, 06:36:17 AM
Where do you see the Complete miner - 8x K16 stacked on 4 200x100 heatsinks with fans and enclosure?
http://technobit.eu/index.php?id_product=24&controller=product
Only single
August 11, 2013, 06:35:05 AM
Where do you see the Complete miner - 8x K16 stacked on 4 200x100 heatsinks with fans and enclosure?
August 11, 2013, 06:32:28 AM
August 11, 2013, 06:26:23 AM
any update on availability / price of complete miner.
August 10, 2013, 10:19:40 AM
I got a few K16's on order but if hex runs faster and a couple of bucks cheaper 
On the other hand.. If K16 is stable and deliverd earlier than the "still in test" HEX unit
On the other hand.. If K16 is stable and deliverd earlier than the "still in test" HEX unit
August 10, 2013, 10:16:25 AM
Will the K16 also be capable of running faster like the HEX version?
And
Will the HEX be ready the same time as the K16? I mean K16 was further in development as i readed in this thread?
And
Will the HEX be ready the same time as the K16? I mean K16 was further in development as i readed in this thread?
Its most probably the opposite. Klondike is not able of running at high clocks since the parts arent ready for this. The HEX already were test-run at 450MHz but i wait for tests too before i would buy.
Jump to: