Topic: TechnoBit Eastern Europe, BG HEX16A 7 GH/s/Плaтки имoнтaж нa Aвaлoн чип - page 24. (Read 92636 times)
September 19, 2013, 03:42:34 PM
Awesome marto!
September 19, 2013, 12:54:47 PM
September 19, 2013, 11:30:54 AM
Finaly th CGminer is runing with HEX16 @ 100% 7 GHs too
September 16, 2013, 01:29:25 AM
FYI, I have one of burnin's BitBurners from batch 1 and it has been running these same chips @ 1300 mV for more than a month now. Given that you're going to make more than 70% of your profit in the first two months of operation I don't see why you'd want to run them @ 1.2V instead of 1.3...
Actually, it's already run at 1.352 V
HEX 16A @ 450 MHz 7 GH/s
September 16, 2013, 12:50:39 AM
FYI, I have one of burnin's BitBurners from batch 1 and it has been running these same chips @ 1300 mV for more than a month now. Given that you're going to make more than 70% of your profit in the first two months of operation I don't see why you'd want to run them @ 1.2V instead of 1.3...
September 15, 2013, 12:38:42 PM
FYI, I have one of burnin's BitBurners from batch 1 and it has been running these same chips @ 1300 mV for more than a month now. Given that you're going to make more than 70% of your profit in the first two months of operation I don't see why you'd want to run them @ 1.2V instead of 1.3...
September 15, 2013, 12:34:41 PM
"" Me too:)""
+1
September 15, 2013, 04:11:39 AM
HEX 16A @ 450 MHz 7 GH/s
Nice, i am very happy to see the final result
Me too:)
September 14, 2013, 08:44:33 PM
HEX 16A @ 450 MHz 7 GH/s
Nice, i am very happy to see the final result
September 14, 2013, 07:06:21 PM
HEX 16A @ 450 MHz 7 GH/s
September 14, 2013, 10:58:11 AM
Any news on chips? refunds? full refunds on pcb and shipping?
Marto will we also be getting refund on the board hardware/shipping costs etc when chips are going to be refunded from your GB?
This is postponed until Monday for nowLets wait and see what will happen on 16.09., i think we have to decide then what to do.
I think the current feeling of the buyers in batch1 tends to refund because each further day increases the loss significantly.
September 14, 2013, 10:04:11 AM
Any news on chips? refunds? full refunds on pcb and shipping?
September 12, 2013, 07:00:07 PM
The board did already ran @ 450 Mhz,
This test was in order to run it with drivers for CG miner @ the max safe with 1.2 V - 370 MHz
This test was in order to run it with drivers for CG miner @ the max safe with 1.2 V - 370 MHz
Wonderful
September 12, 2013, 06:57:50 PM
The board did already ran @ 450 Mhz,
This test was in order to run it with drivers for CG miner @ the max safe with 1.2 V - 370 MHz
This test was in order to run it with drivers for CG miner @ the max safe with 1.2 V - 370 MHz
September 12, 2013, 06:53:52 PM
cg miner drivers are ready.
HEX 16 hashing @ 370 Mhz with a few tweaks to be done
HEX 16 hashing @ 370 Mhz with a few tweaks to be done
Great job marto. But will it able to reach 450 MHz with new board?
September 12, 2013, 06:36:05 PM
cg miner drivers are ready.
HEX 16 hashing @ 370 Mhz with a few tweaks to be done
HEX 16 hashing @ 370 Mhz with a few tweaks to be done
September 12, 2013, 11:34:47 AM
Hi marto,
is it still possible to order stuff from your shop? Have send a mail to support but no answer regarding heatsinks.
I would need some hex heatsinks for proto testing, are there dimensions of the groove available?
cheers
Foofighter
Sorryis it still possible to order stuff from your shop? Have send a mail to support but no answer regarding heatsinks.
I would need some hex heatsinks for proto testing, are there dimensions of the groove available?
cheers
Foofighter
spent last few days deliverin and assembling S-hash board prototype.
It's now running @ 36-38 GH/s
I'll try to answer all of you in the next few days.
In the begining of next week first batch of HEX16 boards will be here and we are starting assembly for the customers with Avalon chips on hand
great news martin, my shash has also 37-39GH.
looking forward to buy some more shash power from you!
Any estimates when it will be available in shop? and pricing?
cheers
Foofighter
September 12, 2013, 10:47:04 AM
Hi marto,
is it still possible to order stuff from your shop? Have send a mail to support but no answer regarding heatsinks.
I would need some hex heatsinks for proto testing, are there dimensions of the groove available?
cheers
Foofighter
Sorryis it still possible to order stuff from your shop? Have send a mail to support but no answer regarding heatsinks.
I would need some hex heatsinks for proto testing, are there dimensions of the groove available?
cheers
Foofighter
spent last few days deliverin and assembling S-hash board prototype.
It's now running @ 36-38 GH/s
I'll try to answer all of you in the next few days.
In the begining of next week first batch of HEX16 boards will be here and we are starting assembly for the customers with Avalon chips on hand
September 12, 2013, 02:10:50 AM
Hi marto,
is it still possible to order stuff from your shop? Have send a mail to support but no answer regarding heatsinks.
I would need some hex heatsinks for proto testing, are there dimensions of the groove available?
cheers
Foofighter
is it still possible to order stuff from your shop? Have send a mail to support but no answer regarding heatsinks.
I would need some hex heatsinks for proto testing, are there dimensions of the groove available?
cheers
Foofighter
September 12, 2013, 02:03:55 AM
Marto will we also be getting refund on the board hardware/shipping costs etc when chips are going to be refunded from your GB?
This is postponed until Monday for now Jump to: