TECHNOBIT support tread + customer feedback - page 14.

sorehammer

sr. member

Activity: 504

Merit: 250

so how do you ssh without a pc ?

ZBC3

sr. member

Activity: 361

Merit: 250

With the tplink that came with the 16Hex4E, I used ssh to start the miner and it immediately was killed. Then I tried using the tplink I updated, and when I ssh into it runs the miner after typing cgminer with pool info. However, when I close ssh, it shuts down the miner. How do I give tw access?

How do I give tw access without a PC? If that's not possible, then what are the instructions for giving tw access with a PC? I may have to get one from
My office if I need to.

TechnobitVesi:
I added trust to your bitcointalk user profile.

technobitVesi

newbie

Activity: 65

Merit: 0

Quote from: ZBC3 on October 04, 2014, 07:33:01 AM

Thanks for the feedback. I switched to a 1000 w 4 rail psu with 25a on each rail. I just connected it to the 16Hex4E and it powers on, but i dont see any hashing.

Can you provide us Team Viewer access to a PC inside the network where tp-link is?

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: ZBC3 on October 04, 2014, 07:33:01 AM

Thanks for the feedback. I switched to a 1000 w 4 rail psu with 25a on each rail. I just connected it to the 16Hex4E and it powers on, but i dont see any hashing.

A screenshot of your cgminer screen and lsusb output also?
Did you upgrade de the tplink recently?
If yes just make sure that cgminer starts and exec /usr/bin/fix_rc

ZBC3

sr. member

Activity: 361

Merit: 250

Thanks for the feedback. I switched to a 1000 w 4 rail psu with 25a on each rail. I just connected it to the 16Hex4E and it powers on, but i dont see any hashing.

WiWi

member

Activity: 83

Merit: 10

Did you receive my PM Vesi?

Cortex7

full member

Activity: 238

Merit: 106

Quote from: technobitVesi on October 03, 2014, 11:33:10 PM

Quote from: Cortex7 on October 03, 2014, 08:18:00 PM

Hi technobitVesi,

ORDER#: HCRSHRFOY

2 x TPLinks, payed for in full via paypal a couple of months ago.

I got my HEX4Ms

but not my TPLinks Cry

P.S. Rockerbox chips look nice.

HI,
Sorry for the delay on tp-link's
1.We can ship them Monday.
As far you can get these in your local market and flash them, do you want us to refund this order or you still want them shipped?
2. The new revision of the chips looks better

Regards: Vesi

Yes, a paypal refund would be fine if its easier for you guys.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: ZBC3 on October 04, 2014, 05:31:36 AM

Got my 4Hex16E and its a nice design. I am looking forward to your future miners that will be similiar in design.

My miner was hashing at an avg of 610 GH/s for 4 hours, but then suddenly stopped. Is there anything i could post from the tplink log that would be helpful? Im using a corsair cxm750 to power the miner. Your help is greatly appreciated.

Sound like overload. I believe you will need at least 800 watt PSU.

technobitVesi

newbie

Activity: 65

Merit: 0

Quote from: ZBC3 on October 04, 2014, 05:31:36 AM

Got my 4Hex16E and its a nice design. I am looking forward to your future miners that will be similiar in design.

My miner was hashing at an avg of 610 GH/s for 4 hours, but then suddenly stopped. Is there anything i could post from the tplink log that would be helpful? Im using a corsair cxm750 to power the miner. Your help is greatly appreciated.

Hi,
check first the PSU please

Regards Vesi

ZBC3

sr. member

Activity: 361

Merit: 250

Got my 4Hex16E and its a nice design. I am looking forward to your future miners that will be similiar in design.

My miner was hashing at an avg of 610 GH/s for 4 hours, but then suddenly stopped. Is there anything i could post from the tplink log that would be helpful? Im using a corsair cxm750 to power the miner. Your help is greatly appreciated.

WiWi

member

Activity: 83

Merit: 10

Hi Vesi,

Would be nice if i could receive the new HEX4M as soon as possible, the one i´ve got here is working on half speed since arrival 2 months ago.
If you guys could please send me the new one, i can return the defective one asap.
Its problem with controller chips as Martin explained to me

Regards
Wilco

technobitVesi

newbie

Activity: 65

Merit: 0

Quote from: Cortex7 on October 03, 2014, 08:18:00 PM

Hi technobitVesi,

ORDER#: HCRSHRFOY

2 x TPLinks, payed for in full via paypal a couple of months ago.

I got my HEX4Ms

but not my TPLinks Cry

P.S. Rockerbox chips look nice.

HI,
Sorry for the delay on tp-link's
1.We can ship them Monday.
As far you can get these in your local market and flash them, do you want us to refund this order or you still want them shipped?
2. The new revision of the chips looks better

Regards: Vesi

Cortex7

full member

Activity: 238

Merit: 106

Hi technobitVesi,

ORDER#: HCRSHRFOY

2 x TPLinks, payed for in full via paypal a couple of months ago.

I got my HEX4Ms

but not my TPLinks Cry

P.S. Rockerbox chips look nice.

technobitVesi

newbie

Activity: 65

Merit: 0

Hi, all,
Today we got delivered some RockerBox chips , from the last batch here is the first test

http://s13.postimg.org/4g9v53azr/850_GHs_785_W.png

P.S.
By special request with love :
"greetingZ Bick , any news on your newest designs?"

Regards: Vesi

IYFTech

hero member

Activity: 686

Merit: 500

WANTED: Active dev to fix & re-write p2pool in C

Quote from: loshia on October 03, 2014, 01:45:38 PM

Quote from: IYFTech on October 03, 2014, 01:44:49 PM

No, 1Th is the total for the boards, of which 400Gh is dead. I'll try to get his config Wink

And cgminer stats pleas Wink

Will do, as soon as he gets back online........

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: IYFTech on October 03, 2014, 01:44:49 PM

No, 1Th is the total for the boards, of which 400Gh is dead. I'll try to get his config Wink

And cgminer stats please Wink

Ps can you pm me your node adress with worker and pass so I can try it tomorrow .
It will take 20-30 mins not more ...
See you tomorrow dude
Best

IYFTech

hero member

Activity: 686

Merit: 500

WANTED: Active dev to fix & re-write p2pool in C

No, 1Th is the total for the boards, of which 400Gh is dead. I'll try to get his config Wink

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: IYFTech on October 03, 2014, 01:38:30 PM

Quote from: loshia on October 03, 2014, 01:31:21 PM

Hey
If his rate is 4 t and reject is 6.5 g if read that correct what is the actual reject rate In percent? Wink

If you or guy want some help post the config and screen of cgminer with reject rate in %
It should not be a top secret right?
Tell your friend to disable hem pic roling also...

No, the top pic is 4Th total for the node, the bottom pic is his contribution to that total with the HEX4M boards - 1Th total of which ~400Gh is dead - nearly half!

I'll see if I can get his config next time he's online

Thanks for your input

That is way to much
Any way ask him to disable pic rolling then and post config if you can
400 GH is the whole area is that true?
If yes do the math again with mean of the blue area. At least this is how I see it.
Any way cgminer is pretty accurate with reject percentage
You can trust the stats there

IYFTech

hero member

Activity: 686

Merit: 500

WANTED: Active dev to fix & re-write p2pool in C

Quote from: loshia on October 03, 2014, 01:31:21 PM

Hey
If his rate is 4 t and reject is 6.5 g if read that correct what is the actual reject rate In percent? Wink

If you or guy want some help post the config and screen of cgminer with reject rate in %
It should not be a top secret right?
Tell your friend to disable hem pic roling also...

No, the top pic is 4Th total for the node, the bottom pic is his contribution to that total with the HEX4M boards - 1Th total of which ~400Gh is dead - nearly half!

I'll see if I can get his config next time he's online

Thanks for your input

loshia

legendary

Activity: 1610

Merit: 1000

Hey
If his rate is 4 t and reject is 6.5 g if read that correct what is the actual reject rate In percent? Wink

If you or guy want some help post the config and screen of cgminer with reject rate in %
It should not be a top secret right?
Tell your friend to disable hem pic roling also...
Ping ip of your friend?
And latency ?
I have seen 2secs latency between to wired PC connected in same switch so do not count on uk location only

Topic: TECHNOBIT support tread + customer feedback - page 14. (Read 62630 times)