Topic: TECHNOBIT support tread + customer feedback - page 16. (Read 62586 times)
Ship me one I'll review it
1 piece will be shipped tomorrow to dogie for review.
The batch will be out in about 2-3 weeks
The batch will be out in about 2-3 weeks
Well the 400ghs version is good quality so the 800ghs I can only imagine will also be of high quality also.
Right, thanks. So none have been shipped/received yet then?
Hi Martin,
Did you manage to send the hex4m last week?
Did send you an mail regerding this
Did you manage to send the hex4m last week?
Did send you an mail regerding this
Well the 400ghs version is good quality so the 800ghs I can only imagine will also be of high quality also.
So, I might be interested in one or two of these - have any been shipped/delivered yet? Any first impressions?
Peace
Peace
so what is power comsumption for ""800 GHs 2HEX4M enclosed miner""? 464W?
I doubt you'll get 800GH/s and 464W together using minions.
464W will be in an underclocked state in "economy mode".
P.S.
I would also be interested to hear the lowest W/(GH/s) and the hashrate at that setting.
Look at this chart:
https://bitcointalksearch.org/topic/m.8082173
Just multiply it by 2
so the best efficiency one can expect is ~ 0.8 W/GH/s at ~ 400 GH/s
so what is power comsumption for ""800 GHs 2HEX4M enclosed miner""? 464W?
I doubt you'll get 800GH/s and 464W together using minions.
464W will be in an underclocked state in "economy mode".
P.S.
I would also be interested to hear the lowest W/(GH/s) and the hashrate at that setting.
Look at this chart:
https://bitcointalksearch.org/topic/m.8082173
Just multiply it by 2
so what is power comsumption for ""800 GHs 2HEX4M enclosed miner""? 464W?
They will used 950 watt in normal mode.
Underclock mode will use about 800 watt
so what is power comsumption for ""800 GHs 2HEX4M enclosed miner""? 464W?
I doubt you'll get 800GH/s and 464W together using minions.
464W will be in an underclocked state in "economy mode".
P.S.
I would also be interested to hear the lowest W/(GH/s) and the hashrate at that setting.
so what is power comsumption for ""800 GHs 2HEX4M enclosed miner""? 464W?
Yes,
with so much power this is the way to avoid too loud setups or too expensive heatpipe/water cooling solutions.
By Avalon specs the chip is 25 GHS 0.6 W - soo 15*16 - 240 W
Andwe all know these number always go up and also you have PSU and DC-DC loses
SO 350 W is easy to be real numbers
with so much power this is the way to avoid too loud setups or too expensive heatpipe/water cooling solutions.
By Avalon specs the chip is 25 GHS 0.6 W - soo 15*16 - 240 W
Andwe all know these number always go up and also you have PSU and DC-DC loses
SO 350 W is easy to be real numbers
Are you working on a box solution for the Avalon boards as well?
TechnobitMarto now is it?
I added trust to your new user name before the trolls could tarnish it.
If you enjoy mining with actual bitcoin mining hardware like me, then leave Martin (technobitmarto) a positive trust rating.
I added trust to your new user name before the trolls could tarnish it.
If you enjoy mining with actual bitcoin mining hardware like me, then leave Martin (technobitmarto) a positive trust rating.
16x25 = 400 GHs roughly
but we'll see after test is made
but we'll see after test is made
That's a good looking board ghs?
So defending your self is trolling and spamming what is the world coming too 
Quote
Sorry marto74, you are banned from posting or sending personal messages on this forum.
Reposting in self moderated threads, trolling (5 days)
Reposting in self moderated threads, trolling (5 days)
.........
Seriously
I though the posting is self defense
Martin,
Are you going to reopen forum topics with your new username, or does someone have to open topics for you until you get out of newbie status with your new username?
Are you going to reopen forum topics with your new username, or does someone have to open topics for you until you get out of newbie status with your new username?
Jump to: