Pages:
Author

Topic: TECHNOBIT support tread + customer feedback - page 15. (Read 62630 times)

hero member
Activity: 686
Merit: 500
WANTED: Active dev to fix & re-write p2pool in C
the normal cgminer settings are in the tp-link cgminer when you ssh it.

Thanks, I'm asking for a guy who's trying to mine on my node, but the stale/doa rate is very high. Do these have a particular setting needed for p2pool - or do they just not play nice with it?

Thanks.

Edit: We tried --queue 0 in the cgminer settings, which my Ants like, but it didn't seem to help these....
Hey,
Could you be more specific?
Cgminer version and hex boards?
In general Technobit build staged work is hard coded in latest versions to be 2xboards.
But staged work is updated frequently and miner queue also even on pool updates
Please post your config also
The rejects should be low. This is guess I have not tested it myself....
What is the latency between your node and the guy?

Hi loshia,

They are the HEX4M boards with latest firmware.

He didn't post his configs to me.

Low latency, both UK based - good ping.

I've never used them myself, but would like to buy them from him if they are p2pool compatible/work efficiently, but I can't find anyone with experience of using these with p2pool, that's why I'm asking here. Here's a screen of when we had a little play with it on my node:




 - too much reject/doa as can be seen by the brief red peak - need to get that lowered if I'm gonna buy them....... Wink
legendary
Activity: 1610
Merit: 1000
the normal cgminer settings are in the tp-link cgminer when you ssh it.

Thanks, I'm asking for a guy who's trying to mine on my node, but the stale/doa rate is very high. Do these have a particular setting needed for p2pool - or do they just not play nice with it?

Thanks.

Edit: We tried --queue 0 in the cgminer settings, which my Ants like, but it didn't seem to help these....
Hey,
Could you be more specific?
Cgminer version and hex boards?
In general Technobit build staged work is hard coded in latest versions to be 2xboards.
But staged work is updated frequently and miner queue also even on pool updates
Please post your config also
The rejects should be low. This is guess I have not tested it myself....
What is the latency between your node and the guy?
sr. member
Activity: 504
Merit: 250
I've not tried to mine on p2p withit so can't say if they work.
hero member
Activity: 686
Merit: 500
WANTED: Active dev to fix & re-write p2pool in C
the normal cgminer settings are in the tp-link cgminer when you ssh it.

Thanks, I'm asking for a guy who's trying to mine on my node, but the stale/doa rate is very high. Do these have a particular setting needed for p2pool - or do they just not play nice with it?

Thanks.

Edit: We tried --queue 0 in the cgminer settings, which my Ants like, but it didn't seem to help these....
sr. member
Activity: 504
Merit: 250
the normal cgminer settings are in the tp-link cgminer when you ssh it.
hero member
Activity: 686
Merit: 500
WANTED: Active dev to fix & re-write p2pool in C
Is it possible to access the tplink cgminer settings via ssh & adjust the --queue settings? I need to change it for p2pool.

Thanks.
member
Activity: 83
Merit: 10
Hi Vesi,
Dit you look into the order i send you in PM?
newbie
Activity: 65
Merit: 0
Shame about the power efficiency being poor (compared to S3 etc).

Would love to buy from a European company instead of Chinese, especially as no need to pay any import duty (20% for products imported from China to the UK).

Hope that your next miner will be more efficient and then I will definitely buy some from you.

All the best! Stephen
Thank you for the interest.
We  hope we'll have  you as customer in the future.

Regards: Vesi
newbie
Activity: 47
Merit: 0
Shame about the power efficiency being poor (compared to S3 etc).

Would love to buy from a European company instead of Chinese, especially as no need to pay any import duty (20% for products imported from China to the UK).

Hope that your next miner will be more efficient and then I will definitely buy some from you.

All the best! Stephen
newbie
Activity: 65
Merit: 0
You do not pay VAT.
You got PM

Regards: Vesi
sr. member
Activity: 302
Merit: 250
The price is full for all customers.

Why companies with an EU VAT number are supposed to pay VAT as well?

Please ask your accountant.

See more here: http://www.amazon.co.uk/gp/help/customer/display.html/ref=hp_left_cn?ie=UTF8&nodeId=502576

Thanks
newbie
Activity: 65
Merit: 0
HI,

I'll check again and post here.

Regards: Vesi
sr. member
Activity: 407
Merit: 255
Hi,
I'm Vesi from Technobit.
Due the fact Martin will be missing for some time from the forum.
I will be posting updates in behalf of technobit.
you can always use also [email protected]
Hi Vesi, this may have been posted somehwhere but i was wondering if these come with coolers pre-attached?
800 ghs 2hex4m?
We sell them in a sheet metal box with 2 side heatsinks , fans and power distribution board on the side.
Everything assembled , you just need to plug 4 PCI-e to the power distribution board and 2 usb on the back

On the technobit website it says the 2hex4m includes a controller box. Is this correct or does it need a tl-mr3020?
newbie
Activity: 65
Merit: 0
hi 850 will work, but We recomend to leave some headroom and use 1000 + watts .
The price is full for all customers.
We ship within EU

Regards Vesi
So any US Resalers?

Hi,
As far as i know there were some talks, but no signed contract for now.

Regards Vesi
newbie
Activity: 65
Merit: 0
hi 850 will work, but We recomend to leave some headroom and use 1000 + watts .
The price is full for all customers.
We ship within EU

Regards Vesi
sr. member
Activity: 302
Merit: 250
Hi Vesi,

Not sure about the recommended (Gold) PSU: 850/1000/1300?

Can you ship without EU VAT to EU companies or outside the EU? Thanks.
newbie
Activity: 65
Merit: 0
Hi,
I'm Vesi from Technobit.
Due the fact Martin will be missing for some time from the forum.
I will be posting updates in behalf of technobit.
you can always use also [email protected]
Hi Vesi, this may have been posted somehwhere but i was wondering if these come with coolers pre-attached?
800 ghs 2hex4m?
We sell them in a sheet metal box with 2 side heatsinks , fans and power distribution board on the side.
Everything assembled , you just need to plug 4 PCI-e to the power distribution board and 2 usb on the back
legendary
Activity: 1190
Merit: 1000
Hi,
I'm Vesi from Technobit.
Due the fact Martin will be missing for some time from the forum.
I will be posting updates in behalf of technobit.
you can always use also [email protected]

Hi Vesi, nice to meet you  Grin
newbie
Activity: 65
Merit: 0
Hi,
I'm Vesi from Technobit.
Due the fact Martin will be missing for some time from the forum.
I will be posting updates in behalf of technobit.
you can always use also [email protected]
sr. member
Activity: 374
Merit: 250
its just 2 hex4m boards stacked together.
Pages:
Jump to: