No its directely into TPlink and if working ok usb hub will be there.
Should i use hub always?
using a hub now, looks like chip 2 and 3 are working, chip 0 and 1 are not i think
Topic: TECHNOBIT support tread + customer feedback - page 25. (Read 62630 times)
when restarting tp-link i get this:
cgminer version 4.5.0 - Started: [2014-08-11 20:07:56]
--------------------------------------------------------------------------------
(5s):82.62M (1m):29.30G (5m):19.27G (15m):7.945G (avg):67.38Gh/s
A:1984 R:338 HW:0 WU:941.4/m
Connected to stratum-lb48.btcguild.com diff 32 with stratum as user xxxxxxxx
Block: 2e6a1de9... Diff:19.7G Started: [20:09:14] Best share: 1.42K
--------------------------------------------------------------------------------
USB management [P]ool management Settings [D]isplay options [Q]uit
0: HEXM 0 : 1024 820/ 814mV | 82.62M / 67.38Gh/s WU: 941.4/m
--------------------------------------------------------------------------------
[2014-08-11 20:08:46] HEXM 0 Chip[1] last received nonce 3 secs ago reset
[2014-08-11 20:08:47] HEXM 0 Chip[0] last received nonce 3 secs ago reset
[2014-08-11 20:08:49] HEXM 0 Chip[1] last received nonce 3 secs ago reset
[2014-08-11 20:08:50] HEXM 0 Chip[0] last received nonce 3 secs ago reset
[2014-08-11 20:08:52] HEXM 0 Chip[1] last received nonce 3 secs ago reset
[2014-08-11 20:08:53] HEXM 0 Chip[0] last received nonce 3 secs ago reset
[2014-08-11 20:08:55] HEXM 0 Chip[1] last received nonce 3 secs ago reset
[2014-08-11 20:08:56] HEXM 0 Chip[0] last received nonce 3 secs ago reset
[2014-08-11 20:08:58] HEXM 0 Chip[0] last received nonce 2 secs ago reset
[2014-08-11 20:09:00] HEXM 0 Chip[1] last received nonce 5 secs ago reset
[2014-08-11 20:09:01] HEXM 0 Chip[0] last received nonce 3 secs ago reset
[2014-08-11 20:09:03] HEXM 0 Chip[1] last received nonce 3 secs ago reset
[2014-08-11 20:09:04] HEXM 0 Chip[0] last received nonce 3 secs ago reset
and i see leds near chips blinking. Then after about 10 seconds it stops
when blinking its like this: 1000101
ccBBccc
c=led continues in state "1" or "0"
B= led is blinking
seems like chips are not communicating and i only see chip 0 and 1 not 2 and 3, correct me if i am wrong here
Api-log looks like this then:
[Firmware Version] => 20140729
cgminer: 4_3_4_07c5700
Reply was 'STATUS=S,When=1407781072,Code=70,Msg=CGMiner stats,Description=cgminer 4.5.0|STATS=0,ID=HEXM0,Enabled=Y,Status=Alive,Elapsed=100,MHS 5s=3.063G,MHS av=29.74G,Hardware Errors=0,Hardware Errors%=0.0000,USB Read Errors=0,USB Write Errors=0,USB Reset Count=0,Miner Reset Count=20,Last Share Time=1407781031,Chip Count=4,Frequency=1024,Core Voltage=820,PIC Voltage Readings=829,Chip0 Nonces=50,Chip0 Dupes=0,Chip0 Timouts Reset=11,Chip0 HW Errors Reset=0,Chip1 Nonces=15,Chip1 Dupes=0,Chip1 Timouts Reset=8,Chip1 HW Errors Reset=0,Chip2 Nonces=118,Chip2 Dupes=0,Chip2 Timouts Reset=1,Chip2 HW Errors Reset=0,Chip3 Nonces=151,Chip3 Dupes=0,Chip3 Timouts Reset=0,Chip3 HW Errors Reset=0|STATS=1,ID=POOL0,Elapsed=100,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=8.00000000,Min Diff=2.00000000,Max Diff=8.00000000,Min Diff Count=13,Max Diff Count=112,Times Sent=65,Bytes Sent=6965,Times Recv=79,Bytes Recv=14370,Net Bytes Sent=6965,Net Bytes Recv=14370|'
[STATUS] =>
(
[STATUS] => S
[When] => 1407781072
cgminer version 4.5.0 - Started: [2014-08-11 20:07:56]
--------------------------------------------------------------------------------
(5s):82.62M (1m):29.30G (5m):19.27G (15m):7.945G (avg):67.38Gh/s
A:1984 R:338 HW:0 WU:941.4/m
Connected to stratum-lb48.btcguild.com diff 32 with stratum as user xxxxxxxx
Block: 2e6a1de9... Diff:19.7G Started: [20:09:14] Best share: 1.42K
--------------------------------------------------------------------------------
USB management [P]ool management Settings [D]isplay options [Q]uit
0: HEXM 0 : 1024 820/ 814mV | 82.62M / 67.38Gh/s WU: 941.4/m
--------------------------------------------------------------------------------
[2014-08-11 20:08:46] HEXM 0 Chip[1] last received nonce 3 secs ago reset
[2014-08-11 20:08:47] HEXM 0 Chip[0] last received nonce 3 secs ago reset
[2014-08-11 20:08:49] HEXM 0 Chip[1] last received nonce 3 secs ago reset
[2014-08-11 20:08:50] HEXM 0 Chip[0] last received nonce 3 secs ago reset
[2014-08-11 20:08:52] HEXM 0 Chip[1] last received nonce 3 secs ago reset
[2014-08-11 20:08:53] HEXM 0 Chip[0] last received nonce 3 secs ago reset
[2014-08-11 20:08:55] HEXM 0 Chip[1] last received nonce 3 secs ago reset
[2014-08-11 20:08:56] HEXM 0 Chip[0] last received nonce 3 secs ago reset
[2014-08-11 20:08:58] HEXM 0 Chip[0] last received nonce 2 secs ago reset
[2014-08-11 20:09:00] HEXM 0 Chip[1] last received nonce 5 secs ago reset
[2014-08-11 20:09:01] HEXM 0 Chip[0] last received nonce 3 secs ago reset
[2014-08-11 20:09:03] HEXM 0 Chip[1] last received nonce 3 secs ago reset
[2014-08-11 20:09:04] HEXM 0 Chip[0] last received nonce 3 secs ago reset
and i see leds near chips blinking. Then after about 10 seconds it stops
when blinking its like this: 1000101
ccBBccc
c=led continues in state "1" or "0"
B= led is blinking
seems like chips are not communicating and i only see chip 0 and 1 not 2 and 3, correct me if i am wrong here
Api-log looks like this then:
[Firmware Version] => 20140729
cgminer: 4_3_4_07c5700
Reply was 'STATUS=S,When=1407781072,Code=70,Msg=CGMiner stats,Description=cgminer 4.5.0|STATS=0,ID=HEXM0,Enabled=Y,Status=Alive,Elapsed=100,MHS 5s=3.063G,MHS av=29.74G,Hardware Errors=0,Hardware Errors%=0.0000,USB Read Errors=0,USB Write Errors=0,USB Reset Count=0,Miner Reset Count=20,Last Share Time=1407781031,Chip Count=4,Frequency=1024,Core Voltage=820,PIC Voltage Readings=829,Chip0 Nonces=50,Chip0 Dupes=0,Chip0 Timouts Reset=11,Chip0 HW Errors Reset=0,Chip1 Nonces=15,Chip1 Dupes=0,Chip1 Timouts Reset=8,Chip1 HW Errors Reset=0,Chip2 Nonces=118,Chip2 Dupes=0,Chip2 Timouts Reset=1,Chip2 HW Errors Reset=0,Chip3 Nonces=151,Chip3 Dupes=0,Chip3 Timouts Reset=0,Chip3 HW Errors Reset=0|STATS=1,ID=POOL0,Elapsed=100,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=8.00000000,Min Diff=2.00000000,Max Diff=8.00000000,Min Diff Count=13,Max Diff Count=112,Times Sent=65,Bytes Sent=6965,Times Recv=79,Bytes Recv=14370,Net Bytes Sent=6965,Net Bytes Recv=14370|'
[STATUS] =>
(
[STATUS] => S
[When] => 1407781072
Code:
=> 70
[Msg] => CGMiner stats
[Description] => cgminer 4.5.0
)
[STATS0] =>
(
[STATS] => 0
[ID] => HEXM0
[Enabled] => Y
[Status] => Alive
[Elapsed] => 100
[MHS 5s] => 3.063G
[MHS av] => 29.74G
[Hardware Errors] => 0
[Hardware Errors%] => 0.0000
[USB Read Errors] => 0
[USB Write Errors] => 0
[USB Reset Count] => 0
[Miner Reset Count] => 20
[Last Share Time] => 1407781031
[Chip Count] => 4
[Frequency] => 1024
[Core Voltage] => 820
[PIC Voltage Readings] => 829
[Chip0 Nonces] => 50
[Chip0 Dupes] => 0
[Chip0 Timouts Reset] => 11
[Chip0 HW Errors Reset] => 0
[Chip1 Nonces] => 15
[Chip1 Dupes] => 0
[Chip1 Timouts Reset] => 8
[Chip1 HW Errors Reset] => 0
[Chip2 Nonces] => 118
[Chip2 Dupes] => 0
[Chip2 Timouts Reset] => 1
[Chip2 HW Errors Reset] => 0
[Chip3 Nonces] => 151
[Chip3 Dupes] => 0
[Chip3 Timouts Reset] => 0
[Chip3 HW Errors Reset] => 0
)
[STATS1] =>
(
[STATS] => 1
[ID] => POOL0
[Elapsed] => 100
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 8.00000000
[Min Diff] => 2.00000000
[Max Diff] => 8.00000000
[Min Diff Count] => 13
[Max Diff Count] => 112
[Times Sent] => 65
[Bytes Sent] => 6965
[Times Recv] => 79
[Bytes Recv] => 14370
[Net Bytes Sent] => 6965
[Net Bytes Recv] => 14370
)
Not yet sorry.
We are doing all repairs this weekend.
Drop me a PM and for delayed RMA we can agree on some compensation.
Thank you for the understanding
We are doing all repairs this weekend.
Drop me a PM and for delayed RMA we can agree on some compensation.
Thank you for the understanding
Pm sent
Marto read your pm..
i Did, i'll check it again
Oops i forgot 1
Thx for fast reply Marto.
The pakkage was a supprise, cause the coolers where already mounted
Thx for that great service
mm, now cgminers does start, i saw a few seconds mining activity, now nothing anymore
When looking at usb devices in cgminer, there are none
api-log
At every chip leds are like this (left to right): 1000011
Oops i forgot 1
Thx for fast reply Marto.
The pakkage was a supprise, cause the coolers where already mounted
Thx for that great service
mm, now cgminers does start, i saw a few seconds mining activity, now nothing anymore
When looking at usb devices in cgminer, there are none
api-log
Quote
Firmware Version] => 20140729
cgminer: 4_3_4_07c5700
Reply was 'STATUS=S,When=1407776050,Code=70,Msg=CGMiner stats,Description=cgminer 4.5.0|STATS=0,ID=POOL0,Elapsed=122,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=8.00000000,Min Diff=8.00000000,Max Diff=8.00000000,Min Diff Count=73,Max Diff Count=73,Times Sent=2,Bytes Sent=141,Times Recv=10,Bytes Recv=6473,Net Bytes Sent=141,Net Bytes Recv=6473|'
[STATUS] =>
(
[STATUS] => S
[When] => 1407776050
cgminer: 4_3_4_07c5700
Reply was 'STATUS=S,When=1407776050,Code=70,Msg=CGMiner stats,Description=cgminer 4.5.0|STATS=0,ID=POOL0,Elapsed=122,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=8.00000000,Min Diff=8.00000000,Max Diff=8.00000000,Min Diff Count=73,Max Diff Count=73,Times Sent=2,Bytes Sent=141,Times Recv=10,Bytes Recv=6473,Net Bytes Sent=141,Net Bytes Recv=6473|'
[STATUS] =>
(
[STATUS] => S
[When] => 1407776050
Code:
=> 70
[Msg] => CGMiner stats
[Description] => cgminer 4.5.0
)
[STATS0] =>
(
[STATS] => 0
[ID] => POOL0
[Elapsed] => 122
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 8.00000000
[Min Diff] => 8.00000000
[Max Diff] => 8.00000000
[Min Diff Count] => 73
[Max Diff Count] => 73
[Times Sent] => 2
[Bytes Sent] => 141
[Times Recv] => 10
[Bytes Recv] => 6473
[Net Bytes Sent] => 141
[Net Bytes Recv] => 6473
At every chip leds are like this (left to right): 1000011
Received minion miner today, but TP-link shows following when using putty and screen -r xxx.btc
[2014-08-11 18:29:38] /usr/bin/cgminer: --hexminerbe200-pic-roll: '--hexminerbe200-hw-err-res' is not a number
Mon Aug 11 18:29:38 CEST 2014: cgminer exited status (1)
Mon Aug 11 18:29:38 CEST 2014: Sleeping for 3...
Mon Aug 11 18:29:41 CEST 2014: Starting cgminer
[2014-08-11 18:29:41] /usr/bin/cgminer: --hexminerbe200-pic-roll: '--hexminerbe200-hw-err-res' is not a number
APIlog:
[Firmware Version] => 20140729
cgminer: 4_3_4_07c5700
Socket connect failed: Connection refused
Green light on minion board is on, fans are all working
Using version: 0.3.8 downloaded it from link provided here
Whats wrong here?
fill all emty boxes for all type of miners [2014-08-11 18:29:38] /usr/bin/cgminer: --hexminerbe200-pic-roll: '--hexminerbe200-hw-err-res' is not a number
Mon Aug 11 18:29:38 CEST 2014: cgminer exited status (1)
Mon Aug 11 18:29:38 CEST 2014: Sleeping for 3...
Mon Aug 11 18:29:41 CEST 2014: Starting cgminer
[2014-08-11 18:29:41] /usr/bin/cgminer: --hexminerbe200-pic-roll: '--hexminerbe200-hw-err-res' is not a number
APIlog:
[Firmware Version] => 20140729
cgminer: 4_3_4_07c5700
Socket connect failed: Connection refused
Green light on minion board is on, fans are all working
Using version: 0.3.8 downloaded it from link provided here
Whats wrong here?
Received minion miner today, but TP-link shows following when using putty and screen -r xxx.btc
[2014-08-11 18:29:38] /usr/bin/cgminer: --hexminerbe200-pic-roll: '--hexminerbe200-hw-err-res' is not a number
Mon Aug 11 18:29:38 CEST 2014: cgminer exited status (1)
Mon Aug 11 18:29:38 CEST 2014: Sleeping for 3...
Mon Aug 11 18:29:41 CEST 2014: Starting cgminer
[2014-08-11 18:29:41] /usr/bin/cgminer: --hexminerbe200-pic-roll: '--hexminerbe200-hw-err-res' is not a number
APIlog:
[Firmware Version] => 20140729
cgminer: 4_3_4_07c5700
Socket connect failed: Connection refused
Green light on minion board is on, fans are all working
Using version: 0.3.8 downloaded it from link provided here
Whats wrong here?
[2014-08-11 18:29:38] /usr/bin/cgminer: --hexminerbe200-pic-roll: '--hexminerbe200-hw-err-res' is not a number
Mon Aug 11 18:29:38 CEST 2014: cgminer exited status (1)
Mon Aug 11 18:29:38 CEST 2014: Sleeping for 3...
Mon Aug 11 18:29:41 CEST 2014: Starting cgminer
[2014-08-11 18:29:41] /usr/bin/cgminer: --hexminerbe200-pic-roll: '--hexminerbe200-hw-err-res' is not a number
APIlog:
[Firmware Version] => 20140729
cgminer: 4_3_4_07c5700
Socket connect failed: Connection refused
Green light on minion board is on, fans are all working
Using version: 0.3.8 downloaded it from link provided here
Whats wrong here?
RockerBox sample board
test begins
http://www.spondoolies-tech.com/blogs/news/14979953-introducing-the-sp30test begins
they use same chip as base
and perform with 1Gh per 0.66watt
Not yet sorry.
We are doing all repairs this weekend.
Drop me a PM and for delayed RMA we can agree on some compensation.
Thank you for the understanding
We are doing all repairs this weekend.
Drop me a PM and for delayed RMA we can agree on some compensation.
Thank you for the understanding
Pm sent
Not yet sorry.
We are doing all repairs this weekend.
Drop me a PM and for delayed RMA we can agree on some compensation.
Thank you for the understanding
We are doing all repairs this weekend.
Drop me a PM and for delayed RMA we can agree on some compensation.
Thank you for the understanding
Compiled cgminer for windows with our 0.3.8 patch
http://bitcoinbg.eu/tools/cgminer_technobit_win/cgminer_0_3_8.zip
10x to 2good
http://bitcoinbg.eu/tools/cgminer_technobit_win/cgminer_0_3_8.zip
10x to 2good
And no word about the rma questions... akward
It are 2 rma orders.
KTRPTSWCF And RVHJPWQQB
So did both my rma go thru or empty promises like the previous 3?
Compiled cgminer for windows with our 0.3.8 patch
http://bitcoinbg.eu/tools/cgminer_technobit_win/cgminer_0_3_8.zip
10x to 2good
http://bitcoinbg.eu/tools/cgminer_technobit_win/cgminer_0_3_8.zip
10x to 2good
And no word about the rma questions... akward
It are 2 rma orders.
KTRPTSWCF And RVHJPWQQB
Compiled cgminer for windows with our 0.3.8 patch
http://bitcoinbg.eu/tools/cgminer_technobit_win/cgminer_0_3_8.zip
10x to 2good
http://bitcoinbg.eu/tools/cgminer_technobit_win/cgminer_0_3_8.zip
10x to 2good
And no word about the rma questions... akward
Compiled cgminer for windows with our 0.3.8 patch
http://bitcoinbg.eu/tools/cgminer_technobit_win/cgminer_0_3_8.zip
10x to 2good
http://bitcoinbg.eu/tools/cgminer_technobit_win/cgminer_0_3_8.zip
10x to 2good
And no word about the rma questions... akward
Compiled cgminer for windows with our 0.3.8 patch
http://bitcoinbg.eu/tools/cgminer_technobit_win/cgminer_0_3_8.zip
10x to 2good
http://bitcoinbg.eu/tools/cgminer_technobit_win/cgminer_0_3_8.zip
10x to 2good
I like your company but I sent you a RMA for 2 hex16a2's from order WVEFURYEA in december and january but received only one back. Could you give me a discount on my next order?
The new version of cgminer for windows is ready:
https://bitcointalksearch.org/topic/m.8241114
Works great on HEX4M (Minion)
nJoy
https://bitcointalksearch.org/topic/m.8241114
Works great on HEX4M (Minion)
nJoy
@Marto,
Nice work on RockerBox board.
Will the final board accept standard intel coolers, same as HEX4M?
I think developing boards with standard cooler mount would be good, then your existing customers can use their existing equipment and just buy upgrade boards as you develop them.
Nice work on RockerBox board.
Will the final board accept standard intel coolers, same as HEX4M?
I think developing boards with standard cooler mount would be good, then your existing customers can use their existing equipment and just buy upgrade boards as you develop them.
MARTO!
Where are my 2 rma orders? it has been 1,5 months now..
Where are my 2 rma orders? it has been 1,5 months now..
Hi Marto,
I'd like to know if the Minion board is available as an unpopulated PCB + parts and if so for how much or how many chips would each PCB cost in an exchange?
Thanks.
I'd like to know if the Minion board is available as an unpopulated PCB + parts and if so for how much or how many chips would each PCB cost in an exchange?
Thanks.
Jump to: