TECHNOBIT support tread + customer feedback - page 21.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: manicminer on September 13, 2014, 01:31:23 AM

Quote from: manicminer on September 12, 2014, 11:24:15 AM

Quote from: manicminer

That is 240W, if I am correct.

The question: is it "power on the wall" or "power on the system"?

The question: is it "power on the wall" or "power on the system"?

(Hint: http://www.jonnyguru.com/modules.php?name=NDFAQs&op=FAQ_Question&ndfaq_id=8)

Martin

I try to ask the very same question for the 3rd time Sad

- Can you confirm the rated power consumption of 240 GHs HEX8A1 is 240W; correct?

The question: is it "power on the wall" or "power on the system"?

(Hint: http://www.jonnyguru.com/modules.php?name=NDFAQs&op=FAQ_Question&ndfaq_id=8)

I am technical person.

Thank you!

He did already answer to your question https://bitcointalksearch.org/topic/m.8792695

Let me help you make the calculation, for 240 GH/s: 1.3 W x 240 = 312 watt, that was on PSU side not on the wall.

manicminer

sr. member

Activity: 302

Merit: 250

Quote from: manicminer on September 12, 2014, 11:24:15 AM

Quote from: manicminer

That is 240W, if I am correct.

The question: is it "power on the wall" or "power on the system"?

The question: is it "power on the wall" or "power on the system"?

(Hint: http://www.jonnyguru.com/modules.php?name=NDFAQs&op=FAQ_Question&ndfaq_id=8)

Martin

I try to ask the very same question for the 3rd time Sad

- Can you confirm the rated power consumption of 240 GHs HEX8A1 is 240W; correct?

The question: is it "power on the wall" or "power on the system"?

(Hint: http://www.jonnyguru.com/modules.php?name=NDFAQs&op=FAQ_Question&ndfaq_id=8)

I am technical person.

Thank you!

manicminer

sr. member

Activity: 302

Merit: 250

Thank you.

Next questions (240 GHs HEX8A1):

- What is the total shipping size and weight of the box?

- What is the next weight and size of the naked item?

marto74

hero member

Activity: 728

Merit: 500

yes Martin

basicly 700 W PSU will run 2 boards @ 230/860 mV you need 2 PCI-e power lines per board , tough

manicminer

sr. member

Activity: 302

Merit: 250

Quote from: marto74 on September 12, 2014, 11:19:34 AM

1w/ghs you can reach @ about 200 GHS , depending on your PSU quality .

So, what PSU is needed to run 1-2-3-4-5 miners, respectively? In regards to cables and performance. I appreciate you.

Marto > Martin?

Edit: I am beginner in this. Please be patient.

marto74

hero member

Activity: 728

Merit: 500

Quote from: manicminer on September 12, 2014, 10:39:11 AM

Question regarding 240 GHs HEX8A1

http://technobit.eu/index.php?id_product=63&controller=product&id_lang=1
Power consumption is rated at 1W/GHs power

That is 240W, if I am correct.

The question: is it "power on the wall" or "power on the system"?
http://www.jonnyguru.com/modules.php?name=NDFAQs&op=FAQ_Question&ndfaq_id=8

So in reality it works great @ about 1.1 - 1.3W/GHs @ 240 GHS
1w/ghs you can reach @ about 200 GHS , depending on your PSU quality .

manicminer

sr. member

Activity: 302

Merit: 250

Question regarding 240 GHs HEX8A1

http://technobit.eu/index.php?id_product=63&controller=product&id_lang=1
Power consumption is rated at 1W/GHs power

That is 240W, if I am correct.

The question: is it "power on the wall" or "power on the system"?
http://www.jonnyguru.com/modules.php?name=NDFAQs&op=FAQ_Question&ndfaq_id=8

marto74

hero member

Activity: 728

Merit: 500

Quote from: TeQ99 on September 11, 2014, 11:25:41 AM

Quote from: marto74 on September 11, 2014, 10:48:54 AM

Quote from: TeQ99 on September 11, 2014, 10:25:02 AM

And again 5 days have gone by and NO RESPONSE from technobit...
How can we solve this issue.... Do you want me to send the miner back or is that useless???

Please respond i'm getting rather fedd up by you and your company...

Little reminder:
2 miners went for rma you send me two back after 2 months. One miner is working the othe one is not working.
When i connect it to the power supply it will not start nog fan spinning nothing. The other miner on the same power supply is working.

Order ref and I will ship you new one
And you ship broken one to us

KTRPTSWCF is the original order ref

Spare shipped

TeQ99

full member

Activity: 166

Merit: 100

Quote from: marto74 on September 11, 2014, 10:48:54 AM

Quote from: TeQ99 on September 11, 2014, 10:25:02 AM

And again 5 days have gone by and NO RESPONSE from technobit...
How can we solve this issue.... Do you want me to send the miner back or is that useless???

Please respond i'm getting rather fedd up by you and your company...

Little reminder:
2 miners went for rma you send me two back after 2 months. One miner is working the othe one is not working.
When i connect it to the power supply it will not start nog fan spinning nothing. The other miner on the same power supply is working.

Order ref and I will ship you new one
And you ship broken one to us

KTRPTSWCF is the original order ref

marto74

hero member

Activity: 728

Merit: 500

Quote from: TeQ99 on September 11, 2014, 10:25:02 AM

And again 5 days have gone by and NO RESPONSE from technobit...
How can we solve this issue.... Do you want me to send the miner back or is that useless???

Please respond i'm getting rather fedd up by you and your company...

Little reminder:
2 miners went for rma you send me two back after 2 months. One miner is working the othe one is not working.
When i connect it to the power supply it will not start nog fan spinning nothing. The other miner on the same power supply is working.

Order ref and I will ship you new one
And you ship broken one to us

TeQ99

full member

Activity: 166

Merit: 100

And again 5 days have gone by and NO RESPONSE from technobit...
How can we solve this issue.... Do you want me to send the miner back or is that useless???

Please respond i'm getting rather fedd up by you and your company...

Little reminder:
2 miners went for rma you send me two back after 2 months. One miner is working the othe one is not working.
When i connect it to the power supply it will not start nog fan spinning nothing. The other miner on the same power supply is working.

ZBC3

sr. member

Activity: 361

Merit: 250

Martin,

I hope that Rocker chip miner is getting close to production.

How are the Hex16E4 's looking? Have you fixed the small problem and started shipping yet?

Cortex7

full member

Activity: 238

Merit: 106

Quote from: Airwhale on September 09, 2014, 04:41:47 PM

When buying usb hubs for the minion boards, is their any reason to get USB 3.0 or will USB 2.0 do just fine? Planning on having them go in a TP-link type setup.

The receiving interface is USB2 from what I remember reading, some people reported probs with USB3, i read it in the TPLink setup/guide thread, link to it is available in this thread i think Huh

Having said that @wiwi reported USB3 was good for him, so obviously not all USB3 is bad, luck of the draw I suppose.

You should also try and get a hub that will accept DC12V power supply, and power it from one of the boards PSUs (less power use and less power issues like ripple and groudloop).

Same goes for TPLink, cut it's power cable and wire to a board PSUs +5V line if you can.

WiWi

member

Activity: 83

Merit: 10

i dont know what others are using, but i am using a usb 3.0 hub with 12 V power supply. It works fine for me.
I used a usb 2.0 hub b4 this one and had lots of problems, but of course thats in my case.
With this hub its stable

Airwhale

full member

Activity: 221

Merit: 100

When buying usb hubs for the minion boards, is their any reason to get USB 3.0 or will USB 2.0 do just fine? Planning on having them go in a TP-link type setup.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: WiWi on September 08, 2014, 11:18:09 PM

Hi Zich,

ok, thanks. I know binary chart, its part of my job to know it

Its very clear for me, thx.

edit: i tried: chip 0 and 1 are disabled now, thx

Great

WiWi

member

Activity: 83

Merit: 10

Hi Zich,

ok, thanks. I know binary chart, its part of my job to know it

Its very clear for me, thx.

edit: i tried: chip 0 and 1 are disabled now, thx

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: WiWi on September 08, 2014, 02:07:09 AM

@Zich

Do you know how to disable chip 0 and chip1 for a hex4m?
Those two chips are not working right due to mailfunction in controllerchips.
Marto said number 7 or 14 instead of 255, but only with 14 i can disable chip0 not chip1.
How to calculate this?

Hope u know

The setting use binary numbering.
1 represent enable
0 represent disable

Example:

Chips numbering ==> 7654 3210 Decimal
all chips enable ==> 0000 1111 15

all chips disable ==> 0000 0000 0 Roll Eyes

chip 3 disable ==> 0000 0111 7

chip 2 disable ==> 0000 1011 11

chip 1 disable ==> 0000 1101 13

chip 0 disable ==> 0000 1110 14

chip 0 & 1 disable ==> 0000 1100 12

For complete chart : Binary Chart

WiWi

member

Activity: 83

Merit: 10

@Zich

Do you know how to disable chip 0 and chip1 for a hex4m?
Those two chips are not working right due to mailfunction in controllerchips.
Marto said number 7 or 14 instead of 255, but only with 14 i can disable chip0 not chip1.
How to calculate this?

Hope u know

TeQ99

full member

Activity: 166

Merit: 100

Quote from: TeQ99 on September 02, 2014, 09:10:28 AM

Quote from: marto74 on September 02, 2014, 03:26:53 AM

I'll check the outside images and links

Marto, Please check you email regarding the rma return i got. 1 miner is working the other one not. i have been mailing you for the last week.

A week further no response from Technobit.. martin/Marto is hiding?

No response from you.

Topic: TECHNOBIT support tread + customer feedback - page 21. (Read 62630 times)