Running TT-Miner 6.2.0 via a Windows batch file works just fine, but I am trying to set up a python script to manage mining, and no matter what I do with the env and cwd, running TT-Miner in a subprocess always results in:
No cuda shared libraries found. Cannot continue.
Another miner (T-Rex) works just fine through python subprocess.
How is TT-Miner looking up the cuda shared libraries, and how can I provide them appropriately via python subprocess? (It would be much easier to manage there than in a batch file.)
EDIT: It turns out it works just fine... as long as I don't already have TT-Miner running, which I did while I was testing my script. The above error shows in any case where you try to run TT-Miner a second time.
Topic: TT-Miner 2022.4.1 KAWPOW, PROGPOW, ETHASH, ETCHASH, EPIC, SHA512256D, GHOSTRIDER - page 9. (Read 132259 times)
March 07, 2021, 08:32:43 PM
March 03, 2021, 06:13:11 AM
hello,i want to start mine zano,and why i cant hook up my zano wallet address at luckypool.io? do i need to finish downloading data from my zano wallet ?
also i have difficulty find where i can trade zano to other coin? as far as i know coinbase,binance doesnt support zano? thank you for your help
also i have difficulty find where i can trade zano to other coin? as far as i know coinbase,binance doesnt support zano? thank you for your help
February 07, 2021, 02:47:27 AM
Unfortunately, I must second that the ETH hashrate of v6.0.1 has dropped by 8-10%, compared to the v5.0.3
Any updates? This is still true with 6.1
Any update?
January 17, 2021, 04:24:50 AM
Ok, thank you for your réponse 
January 16, 2021, 04:19:35 PM
Unfortunately, I must second that the ETH hashrate of v6.0.1 has dropped by 8-10%, compared to the v5.0.3
Any updates? This is still true with 6.1
January 16, 2021, 01:46:32 PM
Hi all,
I make a fresh install of TT miner 6.1 for veil Progpow (yes my old 1050Ti should do it
.
I am facing with an error when lauching TT Miner :
this error :
15:22:41 Pool[D0]: Received new job#: 63ee1bb17aa0636ac4c1a507ec01b54243fcfa3e79d9b9431770a7fab1b21470
15:22:41 Pool[D0]: Working on Block#: 1049726
15:22:42 Miner: Error ******** GPU[00]: CudaError: 2 at position 54
15:22:58 Miner: Error ******** All GPUs are disabled. TT-Miner cannot continue and will exit now
15:22:58 *** Processing exit.....
Any idea ?
My config :
****************** GPU/CUDA information
GeForce Driver-Ver: 456.43
Supported CUDA-Ver: 11.10
Installed CUDA-Ver: 11.10 10.20 9.20
Found one CUDA device
* #0 PCI 0:1 MSI GeForce GTX 1050 Ti (6.1) CoreClk 1290 MHz 4096 MB SM: 6
****************** Mining-Pool information
ID:00 - Primary pool: veil.woolypooly.com:3098 - Set communication protocol to default: EthProxy
-Wallet: xxxxxmywalletxxxxxx
-Worker:
-Coin: veil
No backup pool defined
****************** Algo information
Algo detection: Auto detect -> PROGPOW
CUDA-Ver. detection: Auto detect -> 11.10
Algo/CUDA loaded: ProgPoW (Programmatic Proof-of-Work) (CUDA 11.10)
I make a fresh install of TT miner 6.1 for veil Progpow (yes my old 1050Ti should do it
.I am facing with an error when lauching TT Miner :
this error :
15:22:41 Pool[D0]: Received new job#: 63ee1bb17aa0636ac4c1a507ec01b54243fcfa3e79d9b9431770a7fab1b21470
15:22:41 Pool[D0]: Working on Block#: 1049726
15:22:42 Miner: Error ******** GPU[00]: CudaError: 2 at position 54
15:22:58 Miner: Error ******** All GPUs are disabled. TT-Miner cannot continue and will exit now
15:22:58 *** Processing exit.....
Any idea ?
My config :
****************** GPU/CUDA information
GeForce Driver-Ver: 456.43
Supported CUDA-Ver: 11.10
Installed CUDA-Ver: 11.10 10.20 9.20
Found one CUDA device
* #0 PCI 0:1 MSI GeForce GTX 1050 Ti (6.1) CoreClk 1290 MHz 4096 MB SM: 6
****************** Mining-Pool information
ID:00 - Primary pool: veil.woolypooly.com:3098 - Set communication protocol to default: EthProxy
-Wallet: xxxxxmywalletxxxxxx
-Worker:
-Coin: veil
No backup pool defined
****************** Algo information
Algo detection: Auto detect -> PROGPOW
CUDA-Ver. detection: Auto detect -> 11.10
Algo/CUDA loaded: ProgPoW (Programmatic Proof-of-Work) (CUDA 11.10)
Veil DAG size is 4.5 GB today. So your 1050 cannot work - sorry.
January 16, 2021, 09:27:03 AM
Hi all,
I make a fresh install of TT miner 6.1 for veil Progpow (yes my old 1050Ti should do it.
I am facing with an error when lauching TT Miner :
this error :
15:22:41 Pool[D0]: Received new job#: 63ee1bb17aa0636ac4c1a507ec01b54243fcfa3e79d9b9431770a7fab1b21470
15:22:41 Pool[D0]: Working on Block#: 1049726
15:22:42 Miner: Error ******** GPU[00]: CudaError: 2 at position 54
15:22:58 Miner: Error ******** All GPUs are disabled. TT-Miner cannot continue and will exit now
15:22:58 *** Processing exit.....
Any idea ?
My config :
****************** GPU/CUDA information
GeForce Driver-Ver: 456.43
Supported CUDA-Ver: 11.10
Installed CUDA-Ver: 11.10 10.20 9.20
Found one CUDA device
* #0 PCI 0:1 MSI GeForce GTX 1050 Ti (6.1) CoreClk 1290 MHz 4096 MB SM: 6
****************** Mining-Pool information
ID:00 - Primary pool: veil.woolypooly.com:3098 - Set communication protocol to default: EthProxy
-Wallet: xxxxxmywalletxxxxxx
-Worker:
-Coin: veil
No backup pool defined
****************** Algo information
Algo detection: Auto detect -> PROGPOW
CUDA-Ver. detection: Auto detect -> 11.10
Algo/CUDA loaded: ProgPoW (Programmatic Proof-of-Work) (CUDA 11.10)
I make a fresh install of TT miner 6.1 for veil Progpow (yes my old 1050Ti should do it
.I am facing with an error when lauching TT Miner :
this error :
15:22:41 Pool[D0]: Received new job#: 63ee1bb17aa0636ac4c1a507ec01b54243fcfa3e79d9b9431770a7fab1b21470
15:22:41 Pool[D0]: Working on Block#: 1049726
15:22:42 Miner: Error ******** GPU[00]: CudaError: 2 at position 54
15:22:58 Miner: Error ******** All GPUs are disabled. TT-Miner cannot continue and will exit now
15:22:58 *** Processing exit.....
Any idea ?
My config :
****************** GPU/CUDA information
GeForce Driver-Ver: 456.43
Supported CUDA-Ver: 11.10
Installed CUDA-Ver: 11.10 10.20 9.20
Found one CUDA device
* #0 PCI 0:1 MSI GeForce GTX 1050 Ti (6.1) CoreClk 1290 MHz 4096 MB SM: 6
****************** Mining-Pool information
ID:00 - Primary pool: veil.woolypooly.com:3098 - Set communication protocol to default: EthProxy
-Wallet: xxxxxmywalletxxxxxx
-Worker:
-Coin: veil
No backup pool defined
****************** Algo information
Algo detection: Auto detect -> PROGPOW
CUDA-Ver. detection: Auto detect -> 11.10
Algo/CUDA loaded: ProgPoW (Programmatic Proof-of-Work) (CUDA 11.10)
January 10, 2021, 09:00:31 PM
Hi,
All of sudden my hashrates dropped from 24/42 (1070/1080Ti) down to 20 on all cards. It happened during operation and not reset or reboot. Regardless of the core clock, drivers and card. It does not matter what I do, the hashrate seems to be "capped" to 20MH/s. Anyone experienced this before?
All of sudden my hashrates dropped from 24/42 (1070/1080Ti) down to 20 on all cards. It happened during operation and not reset or reboot. Regardless of the core clock, drivers and card. It does not matter what I do, the hashrate seems to be "capped" to 20MH/s. Anyone experienced this before?
January 09, 2021, 07:34:06 PM
You could hit 2 blocks or 3 blocks in 11 days or none at all.
Yeah you wanna figure the odds on 3.4gh hitting a block on eth at its current nethash..... lightning is probably more likely
January 09, 2021, 06:25:56 PM
You could hit 2 blocks or 3 blocks in 11 days or none at all.
January 09, 2021, 09:15:30 AM
If you are big enough miner to solo mine eth...then you should easily be able to solve this issue. This or you dont realize how little chance you have of mining solo. Ive got over 3gh and the odds to hit solo are just below zero..... How much hash you got that you solo mine?
To give you an idea i would have to hit a block solo every 11 days to beat mining on a pool. Not going to happen with nethash of eth.
To give you an idea i would have to hit a block solo every 11 days to beat mining on a pool. Not going to happen with nethash of eth.
January 09, 2021, 06:07:52 AM
Hi, Dev
Does the miner support getwork mode (http pools) for solo mining eth in own node? If not - do you plan to implement this feature?
Does the miner support getwork mode (http pools) for solo mining eth in own node? If not - do you plan to implement this feature?
January 04, 2021, 05:25:19 PM
Help when I try to run the program i get
What I can do?
Quote
Couldn't detect a cuda installation. If you run Linux please make sure
that the shared libraries 'libnvrtc.so' and 'libnvrtc-builtins.so' are accessible
for TT. You may want to check your LD_LIBRARY_PATH settings.
I have checked the LD_LIBRARY_PATH and I can find the shared libraries there.that the shared libraries 'libnvrtc.so' and 'libnvrtc-builtins.so' are accessible
for TT. You may want to check your LD_LIBRARY_PATH settings.
What I can do?
December 20, 2020, 08:59:43 AM
Unfortunately, I must second that the ETH hashrate of v6.0.1 has dropped by 8-10%, compared to the v5.0.3
Still true in 6.1.0.
Will work on it after bug fixing. Sorry.
Any news?
December 07, 2020, 12:19:11 PM
Hello guys. Can someone share afterburner settings for 1060 6gb Palit? I`ve got crashes all the time. I am trying with core: 100, memory: 300, powerlimit: 80. Getting a lot of crashes...
December 06, 2020, 03:55:01 PM
Hello,
any thoughts on that one:
Error(2): 'End of file - Socket failure to: epic.icemining.ca:4000'
Showed last night mining Epic.
any thoughts on that one:
Error(2): 'End of file - Socket failure to: epic.icemining.ca:4000'
Showed last night mining Epic.
Means that the server was not available anymore. TT will continue to try to connect to it - or use a backup pool if you setup one.
December 06, 2020, 06:57:50 AM
This post above has Trojan in it.
December 06, 2020, 05:50:03 AM
Hello,
any thoughts on that one:
Error(2): 'End of file - Socket failure to: epic.icemining.ca:4000'
Showed last night mining Epic.
any thoughts on that one:
Error(2): 'End of file - Socket failure to: epic.icemining.ca:4000'
Showed last night mining Epic.
December 01, 2020, 10:30:08 PM
Unfortunately, I must second that the ETH hashrate of v6.0.1 has dropped by 8-10%, compared to the v5.0.3
Still true in 6.1.0.
Hi,
I run a test for 2 days for ETC and noticed that the pool hashrate is about 5-10% higher than the miner hashrate in the 24h average. Can you please check if TT just shows too low values?
Thanks.
November 30, 2020, 04:24:44 AM
Check your messages. GTX1060 6gb/GTX 1660 6gb.
I don't understand.Can you please be a bit more specific? Thank you.
He was talking to me. Send more information about the crash.
Jump to: