EDIT:
Solved: It is a power problem with my existing FPGA's
Topic: [UK GROUP BUY] ASICminer Cube group buy #9 (Accepting orders) - page 7. (Read 22519 times)
December 14, 2013, 02:11:48 PM
I received the cube the other day and I realise that there are 8 chips marked with an "X". I assume these are faulty? Overclocking is not used. Anyone with the same problem?
EDIT:
Solved: It is a power problem with my existing FPGA's
EDIT:
Solved: It is a power problem with my existing FPGA's
December 14, 2013, 12:54:14 PM
Another 1 for me please
9e8dd603a8db231ccf671f1eb33ef94c762dba295494677e0f856cd28d90988e
9e8dd603a8db231ccf671f1eb33ef94c762dba295494677e0f856cd28d90988e
December 14, 2013, 12:16:32 PM
Another 2 paid for 
December 14, 2013, 09:13:40 AM
all of shipment 2 have been sent 
December 14, 2013, 07:10:16 AM
Excellent thank you 
December 14, 2013, 06:34:08 AM
Sorry to ask a further question RE: bfgminer stratum @ HellDiverUK
I've looked every where and cannot find the info regarding switches for the BFGminer proxy (On mine peon) but iv'e seen reference to --rt and --nm (midstate data) and --q ??
https://bitcointalksearch.org/topic/m.3937690
1 off whizz kids posts on the Eligius pool thread he says --nm is a must for blades / cubes?
https://bitcointalksearch.org/topic/m.3867872
Thanks in advance
The --nm and --rt stuff is for Slush's stratum_proxy.exe - it's got nothing to do with bfgminer.
My MinePeon command is:
/opt/minepeon/bin/bfgminer -S all --http-port 8330 -c /opt/minepeon/etc/miner.conf
Assuming you've done a git pull to get MinePeon's version of bfgminer up to 3.8.0
Then all you do is set the Pi's IP address in the server section of the Blade's config, port, and put in a unique username and password on each Blade - it doesn't matter what it is, as long as it's not the same as any other Blade you're going to use.
If it's all working within a few minutes you should see a PXY device appear on the MinePeon screen.
Simples.
December 13, 2013, 08:11:10 PM
I think everyone is waiting for you to say *only kidding got them all delivered* lol
I wish I was gong to say that, after the effort I just put in
Will do them tomorrow morning now Is it Okay if I come and collect mine off you tomorrow?
If so, you have my details, drop me a message when you can!
no probs
December 13, 2013, 08:06:40 PM
I think everyone is waiting for you to say *only kidding got them all delivered* lol
I wish I was gong to say that, after the effort I just put in
Will do them tomorrow morning now Is it Okay if I come and collect mine off you tomorrow?
If so, you have my details, drop me a message when you can!
December 13, 2013, 06:28:25 PM
and HellDiverUK's gem of info to use my RasPi as the proxy
Glad to be of help.
Sorry to ask a further question RE: bfgminer stratum @ HellDiverUK
I've looked every where and cannot find the info regarding switches for the BFGminer proxy (On mine peon) but iv'e seen reference to --rt and --nm (midstate data) and --q ??
https://bitcointalksearch.org/topic/m.3937690
1 off whizz kids posts on the Eligius pool thread he says --nm is a must for blades / cubes?
https://bitcointalksearch.org/topic/m.3867872
Thanks in advance
December 13, 2013, 03:13:16 PM
I think everyone is waiting for you to say *only kidding got them all delivered* lol
I wish I was gong to say that, after the effort I just put in
Will do them tomorrow morning now December 13, 2013, 01:54:45 PM
I think everyone is waiting for you to say *only kidding got them all delivered* lol
December 13, 2013, 01:44:01 PM
Sorry guys, it arrived later than I would have liked. Tried to head off to the post office anyway after a mad rush, got stuck in traffic and by the time I got there they was closing up just sitting outside on the phone now .... *sigh*
just sitting outside on the phone now .... *sigh* December 13, 2013, 12:57:31 PM
not very load at all - though I have it sat in a noisy room anyway...
Thanks.
I hope by the lack of posting by OC3k, he's out at the Post Office sending the 2nd batch.
December 13, 2013, 11:27:25 AM
To the guys who have their Cubes already - how loud is the fan in the Cube?
My mining rig lives behind the sofa in the living room, so I don't want too much noise. Is the fan temp controlled, or does it just run flat out all the time like the BFL fans?
not very load at all - though I have it sat in a noisy room anyway...My mining rig lives behind the sofa in the living room, so I don't want too much noise. Is the fan temp controlled, or does it just run flat out all the time like the BFL fans?
not tried O/C yet though
December 13, 2013, 08:16:10 AM
Hi, Thats not a problem, My first cube was in batch 2 so at least that should get shipped (fingers crossed), will probably have a few more orders over the weekend or Monday :-)
Thanks
Thanks
December 13, 2013, 08:10:05 AM
OC - Is it too late to add another Cube to my order ?
tx id = https://blockchain.info/tx/25337190ffcc81fbd02f0e1769662963904271802b297488f0de973fe2b5b2c6
I added another 0.09 for delivery just in case it goes out in two parcels.
Thanks again
Rhys
tx id = https://blockchain.info/tx/25337190ffcc81fbd02f0e1769662963904271802b297488f0de973fe2b5b2c6
I added another 0.09 for delivery just in case it goes out in two parcels.
Thanks again
Rhys
Unfortunately all the cubes from shipment 2 (which is due to arrive today) have been sold.
I can only add you to shipment 3 now, which will arrive next week.
If this is a problem, let me know and I can refund you, but you should still have it in time for Christmas.
December 13, 2013, 08:06:30 AM
To the guys who have their Cubes already - how loud is the fan in the Cube?
My mining rig lives behind the sofa in the living room, so I don't want too much noise. Is the fan temp controlled, or does it just run flat out all the time like the BFL fans?
My mining rig lives behind the sofa in the living room, so I don't want too much noise. Is the fan temp controlled, or does it just run flat out all the time like the BFL fans?
December 13, 2013, 08:02:43 AM
OC - Is it too late to add another Cube to my order ?
tx id = https://blockchain.info/tx/25337190ffcc81fbd02f0e1769662963904271802b297488f0de973fe2b5b2c6
I added another 0.09 for delivery just in case it goes out in two parcels.
Thanks again
Rhys
tx id = https://blockchain.info/tx/25337190ffcc81fbd02f0e1769662963904271802b297488f0de973fe2b5b2c6
I added another 0.09 for delivery just in case it goes out in two parcels.
Thanks again
Rhys
December 13, 2013, 07:48:17 AM
Any update on the 2nd batch ETA?
Looks like its out for delivery, so I should receive them today \
/ As long as I receive them by 3:30-4:00pm, I should just about, have time to send them all today.
EPIC!
December 13, 2013, 07:47:50 AM
There are extra units included in shipment 3 (which will be delivered next week), if anyone orders today they should (as long as the postman doesnt screw up) still be delivered in time for christmas
Jump to: