[UPDATE] RX480 (Ref) 31+Mh, Custom Rom - VDDC OFFSET + Custom timing - page 28.

tutorialevideo

legendary

Activity: 1161

Merit: 1001

Don`t invest more than you can afford to lose

I will test this bios in the next days

AzzAz

legendary

Activity: 1030

Merit: 1006

Quote from: Eliovp on September 21, 2016, 07:46:09 AM

Quote from: hasher87 on September 21, 2016, 05:51:49 AM

Quote from: hasher87 on September 20, 2016, 10:54:27 AM

Quote from: LoneRangir on September 19, 2016, 10:29:40 PM

Quote from: hasher87 on September 19, 2016, 10:11:03 PM

flashed RX480-30MhOTB on my 2 units of XFX RX480 8gb Reference, it does run up to 30Mh/s however it wasn't that consistent (dropping down to 23-27 most of the time), is there something else i should look at from Radeon software tweak?

Do your XFX cards have backplates? I tried flashing the LowEnergyOK ROM onto my (reference?) XFX cards (w/ backplates) and was unable to.

Yes, but its not the black oc edition...

Just an update, so far i reflashed back the card, open the radeon software, set the voltage to 920 and others as manual, the rate is consistent between 28-30Mh

after resetting my PC due to low hashrate along the way, the hashrate now went back to inconsistent 23-27 ... why is that happening anyway? :/

Could be a few things. Memory to tight. Memory clock to high, you can check this easiest if you open up Afterburner and check if the Frame buffer is over 95% "consistant".
Could also be that the TDP limit in the rom is to low. So it's bottlenecking there.
Could also be a temperature issue.

Could be a lot of things :p

And best is to go for 29MH Low Power bios
- and say "thank you " to eliovp if you wish -

Eliovp

legendary

Activity: 1050

Merit: 1293

Huh?

Quote from: hasher87 on September 21, 2016, 05:51:49 AM

Quote from: hasher87 on September 20, 2016, 10:54:27 AM

Quote from: LoneRangir on September 19, 2016, 10:29:40 PM

Quote from: hasher87 on September 19, 2016, 10:11:03 PM

flashed RX480-30MhOTB on my 2 units of XFX RX480 8gb Reference, it does run up to 30Mh/s however it wasn't that consistent (dropping down to 23-27 most of the time), is there something else i should look at from Radeon software tweak?

Do your XFX cards have backplates? I tried flashing the LowEnergyOK ROM onto my (reference?) XFX cards (w/ backplates) and was unable to.

Yes, but its not the black oc edition...

Just an update, so far i reflashed back the card, open the radeon software, set the voltage to 920 and others as manual, the rate is consistent between 28-30Mh

after resetting my PC due to low hashrate along the way, the hashrate now went back to inconsistent 23-27 ... why is that happening anyway? :/

Could be a few things. Memory to tight. Memory clock to high, you can check this easiest if you open up Afterburner and check if the Frame buffer is over 95% "consistant".
Could also be that the TDP limit in the rom is to low. So it's bottlenecking there.
Could also be a temperature issue.

Could be a lot of things :p

hasher87

hero member

Activity: 686

Merit: 500

Quote from: hasher87 on September 20, 2016, 10:54:27 AM

Quote from: LoneRangir on September 19, 2016, 10:29:40 PM

Quote from: hasher87 on September 19, 2016, 10:11:03 PM

flashed RX480-30MhOTB on my 2 units of XFX RX480 8gb Reference, it does run up to 30Mh/s however it wasn't that consistent (dropping down to 23-27 most of the time), is there something else i should look at from Radeon software tweak?

Do your XFX cards have backplates? I tried flashing the LowEnergyOK ROM onto my (reference?) XFX cards (w/ backplates) and was unable to.

Yes, but its not the black oc edition...

Just an update, so far i reflashed back the card, open the radeon software, set the voltage to 920 and others as manual, the rate is consistent between 28-30Mh

after resetting my PC due to low hashrate along the way, the hashrate now went back to inconsistent 23-27 ... why is that happening anyway? :/

Ambros

hero member

Activity: 653

Merit: 500

Quote from: Lion BItcoin Shop on September 20, 2016, 08:45:32 PM

i ordered 1 saphire Nitro Rx 470 4gb, will be tested next day, i think the Rx 470 4gb can beat Rx 480 8gb, if my speculation is right, i think i will sell my Rx 480 8gb to buying some Rx 470 4gb Roll Eyes

Beat about what ?
I agree that they can achieve a better Mhash/$ ratio. But i doubt then can beat RX 480 total hash rate. But i will be happy to be wrong! Let us know

FlensGold

legendary

Activity: 1405

Merit: 1001

Quote from: Lion BItcoin Shop on September 20, 2016, 08:45:32 PM

i ordered 1 saphire Nitro Rx 470 4gb, will be tested next day, i think the Rx 470 4gb can beat Rx 480 8gb, if my speculation is right, i think i will sell my Rx 480 8gb to buying some Rx 470 4gb Roll Eyes

Let us know about your results, I am very interested :-)

Lion BItcoin Shop

hero member

Activity: 588

Merit: 500

BitcoreService.com

i ordered 1 saphire Nitro Rx 470 4gb, will be tested next day, i think the Rx 470 4gb can beat Rx 480 8gb, if my speculation is right, i think i will sell my Rx 480 8gb to buying some Rx 470 4gb Roll Eyes

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: ccplz on September 20, 2016, 01:38:12 PM

Okay so I flashed the rx 480 with the 32 mh/s rom, and I must have fucked it up somehow because i'm only getting 7 mh/s with claymore's miner.
I don't know what i'm doing wrong,I also tried the 30 mhs rom and the results are pretty much the same.
Flashing back to the original bios gets me to 24-25 mhs.
Any ideas?

Using these on my .bat file.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool europe.ethash-hub.miningpoolhub.com:20536 -ewal x -eworker x -epsw x -allpools 1 -mode 1 -di 1

Windows 7 x64

Asus RX 480(Reference) 8gb

Latest radeon drivers(16.9.1)

P.S. when I tried to flash it I got the subID error,so I opened the polaris editor and edited the custom bios ROM values to match with my card's original ones,then completed the flash procedure.

EDIT: Fixed

if you are only doing ETH mining, use -ethi 16 (maximum speed)

BTCBusinessConsult

sr. member

Activity: 546

Merit: 250

Active Trading on EPIC5k and Spectre.Ai

You CANNOT use ANY OTHER video card besides AMD 480 REFERENCE with the REFERENCE Bios.

You CANNOT use any Bios intended for a certain card with anything other than that card.

Example, you CANNOT flash a 480 REFERENCE bios onto a Saphire Nitro.

You CANNOT flash a Saphire 480 Nitro bios onto a MSI 480 gaming.

You are going to destroy your cards. You seriously need to do some research and figure this stuff out before you blow up your $275 dollar investment.

Flashing Bios WILL and DOES void your warranty.

xxcsu

hero member

Activity: 1498

Merit: 597

ATTN For all of you ! Those bios files out there is for reference card ONLY !!! Not all reference card are the same !!! if you have a referenec card with high asic quality those high hash rate roms probably going to work for you ! If you have a reference card with lower asic quality your card probably not going to work with a high hash rate rom file !!! Use gpuZ to check your ASIC quality ...
If you flashed the rom and you hash rate is falling to the 20-23 range , that bios is not for you at all ! You can try to set the memory max frequency lower with wattman or watttools then it may will work for you , but you going to get lower hash rate .

REFERENCE CARD ROM FILES ARE NOT INTERCHANGEABLE WITH NON REFERENCE CARDS

im modding rom files for myself for none reference cards . I have 6 different brand rx 480 .
Within one brand , same model number , sometimes i can not use my modded rom file on all my (same brand,same model number) rx480 cards. Is working fine with one card with High ASIC quality , and not working at all on another one with lower ASIC quality .
In my experience those cards (same brand, same model number) with ASIC quality over 70% are working fine with my modded bios . For lower ASIC quality Cards i need to adjust the mem frequency lower with polaris bios editor , then flashing the cards ...

There is my latest built

will update pictures soon

https://bitcointalksearch.org/topic/my-build-info-3-psu-3-mobo-16-cards-combo-for-eth-480mhs-1614386

ccplz

full member

Activity: 255

Merit: 116

Okay so I flashed the rx 480 with the 32 mh/s rom, and I must have fucked it up somehow because i'm only getting 7 mh/s with claymore's miner.
I don't know what i'm doing wrong,I also tried the 30 mhs rom and the results are pretty much the same.
Flashing back to the original bios gets me to 24-25 mhs.
Any ideas?

Using these on my .bat file.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool europe.ethash-hub.miningpoolhub.com:20536 -ewal x -eworker x -epsw x -allpools 1 -mode 1 -di 1

Windows 7 x64

Asus RX 480(Reference) 8gb

Latest radeon drivers(16.9.1)

P.S. when I tried to flash it I got the subID error,so I opened the polaris editor and edited the custom bios ROM values to match with my card's original ones,then completed the flash procedure.

EDIT: Fixed

hasher87

hero member

Activity: 686

Merit: 500

Quote from: LoneRangir on September 19, 2016, 10:29:40 PM

Quote from: hasher87 on September 19, 2016, 10:11:03 PM

flashed RX480-30MhOTB on my 2 units of XFX RX480 8gb Reference, it does run up to 30Mh/s however it wasn't that consistent (dropping down to 23-27 most of the time), is there something else i should look at from Radeon software tweak?

Do your XFX cards have backplates? I tried flashing the LowEnergyOK ROM onto my (reference?) XFX cards (w/ backplates) and was unable to.

Yes, but its not the black oc edition...

Just an update, so far i reflashed back the card, open the radeon software, set the voltage to 920 and others as manual, the rate is consistent between 28-30Mh

Bostast

newbie

Activity: 10

Merit: 0

Quote from: ccplz on September 20, 2016, 06:29:56 AM

Hello.

I bought an ASUS RX 480 8gb,and an Arctic Accelero IV custom cooler.

Now I have some questions.

a)Can I install the cooler on the card?
b)Will installing it void my warranty?
c)Will it work properly with the 32 mhs bios rom?

Thanks in advance.

If you do not break seal, you can install it. If you need to return the card, you can install the original cooler back. Nobody will notice.

mikewetminer88

newbie

Activity: 30

Merit: 0

Quote from: Galendel on September 20, 2016, 06:23:45 AM

Quote

Ho w you have use this bios with sapphire nitro 8gb ? I have try and didnt work so i found i good bios for nitro 8gb i can give link if need.

I just download the bios and apply it with atiflash tool, I am using a second card to boot else it doesn't boot. But I have no idea why it doesn't boot with this one.

But I have the latest driver 16.9.1, it doesn't work with older version

You may have to reinstall drivers after boot.
I will try your bios if you share ^^.

Thanks

Those rom listed here on starting post are for reference RX480 ONLY. Do not flash on Non-ref card like Sapphire Nitro+, MSI gaming X, XFX GTR and etc.

bayo

full member

Activity: 200

Merit: 100

Quote from: Galendel on September 20, 2016, 06:23:45 AM

Quote

Ho w you have use this bios with sapphire nitro 8gb ? I have try and didnt work so i found i good bios for nitro 8gb i can give link if need.

I just download the bios and apply it with atiflash tool, I am using a second card to boot else it doesn't boot. But I have no idea why it doesn't boot with this one.

But I have the latest driver 16.9.1, it doesn't work with older version

You may have to reinstall drivers after boot.
I will try your bios if you share ^^.

Thanks

Here is link https://www.sendspace.com/file/8tyzwb Its from ethereum forum.

ccplz

full member

Activity: 255

Merit: 116

Hello.

I bought an ASUS RX 480 8gb,and an Arctic Accelero IV custom cooler.

Now I have some questions.

a)Can I install the cooler on the card?
b)Will installing it void my warranty?
c)Will it work properly with the 32 mhs bios rom?

Thanks in advance.

Galendel

newbie

Activity: 2

Merit: 0

Quote

Ho w you have use this bios with sapphire nitro 8gb ? I have try and didnt work so i found i good bios for nitro 8gb i can give link if need.

I just download the bios and apply it with atiflash tool, I am using a second card to boot else it doesn't boot. But I have no idea why it doesn't boot with this one.

But I have the latest driver 16.9.1, it doesn't work with older version

You may have to reinstall drivers after boot.
I will try your bios if you share ^^.

Thanks

bayo

full member

Activity: 200

Merit: 100

Quote from: Galendel on September 20, 2016, 02:56:58 AM

Hi,

I have 2x rx 480 sapphire nitro 8gb, I flash one but then I can't boot on it anymore(I tried alone and with both card, I switch PCI-E), but if I boot with the second one(not flash) it's working, performance are not so great I am more at 25.5-26, energy is probably much better.
In Amd setting the card is shown as disable, the 30Mh doesn't seem really stable, so I used the switch bios.

I am using the latest driver Crimson Edition 16.9.1 Hotfix.

Is this normal?, I read quickly most of the 30pages, no one seem to have issues like mine.

I used
RX480-30MhOTB
480LowEnergyOK
from Eliovp.

And I am on win10

I didn't really get what is this one RX480Mod.zip (original backup?)

I will try to revert the bios that is messed up.

Thanks for any help

Ho w you have use this bios with sapphire nitro 8gb ? I have try and didnt work so i found i good bios for nitro 8gb i can give link if need.

Galendel

newbie

Activity: 2

Merit: 0

Hi,

I have 2x rx 480 sapphire nitro 8gb, I flash one but then I can't boot on it anymore(I tried alone and with both card, I switch PCI-E), but if I boot with the second one(not flash) it's working, performance are not so great I am more at 25.5-26, energy is probably much better.
In Amd setting the card is shown as disable, the 30Mh doesn't seem really stable, so I used the switch bios.

I am using the latest driver Crimson Edition 16.9.1 Hotfix.

Is this normal?, I read quickly most of the 30pages, no one seem to have issues like mine.

I used
RX480-30MhOTB
480LowEnergyOK
from Eliovp.

And I am on win10

I didn't really get what is this one RX480Mod.zip (original backup?)

I will try to revert the bios that is messed up.

Thanks for any help

LoneRangir

hero member

Activity: 615

Merit: 500

Quote from: hasher87 on September 19, 2016, 10:11:03 PM

flashed RX480-30MhOTB on my 2 units of XFX RX480 8gb Reference, it does run up to 30Mh/s however it wasn't that consistent (dropping down to 23-27 most of the time), is there something else i should look at from Radeon software tweak?

Do your XFX cards have backplates? I tried flashing the LowEnergyOK ROM onto my (reference?) XFX cards (w/ backplates) and was unable to.

Topic: [UPDATE] RX480 (Ref) 31+Mh, Custom Rom - VDDC OFFSET + Custom timing - page 28. (Read 231032 times)