Following is a problem I had with vanitygen, not sure whether I did something wrong and or whether this is something that may happen from time to time...
a) I generated 5 Doge addresses making use of the oclvanity command and the -X 30 -e parameters to generate a addresses with encrypted private keys.
b) Some coins were sent to the one address and all seemed fine (luckily only about $1)
c) I used the keyconv command with the -X 30 parameter to decrypt the encrypted private key which worked without any problems and it gave me the correct Doge address
d) I tried to import the private key of this address into a Dogechain wallet but it does not accept the private key. Tried the Wif and Hex versions of the private key
e) Tried the Doge paper wallet generator where you enter the Wif/Hex keys and get details on the address and tried the other formats of the private key but none seems to work...
The above only happened with the one address, the other 4 all worked fine and I've been able to import them without problems. Is this something that happens or something I did wrong and if so how do I prevent this from happening or should I just test every address before use to make sure they work 100%?
Topic: Vanitygen: Vanity bitcoin address generator/miner [v0.22] - page 83. (Read 1153678 times)
i'm very lucky 
144444444
1PPpppPppP
1BitcoiN
1Bitcoin
Thank you!
144444444
1PPpppPppP
1BitcoiN
1Bitcoin
Thank you!
As said in the start post you need some numbers for GCN GPUs.
I hope you still need them after time.
My R9 290 makes 33-36MKey/s @ 1000MHz Core and 1260MHz VRAM
And for addition: My i7 860 @ 2,93GHz makes 700-800kKey/s
I hope you still need them after time.
My R9 290 makes 33-36MKey/s @ 1000MHz Core and 1260MHz VRAM
And for addition: My i7 860 @ 2,93GHz makes 700-800kKey/s
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
One question, how to run Vanitygen on my OS X? I don't know how to setup those files on Github.
Download vanitygen and unzip it. Direct to vanitygen folder and run make.
You will need to install OpenSSL and pcre. See http://bitcoin.stackexchange.com/a/6005 for installing pcre & see https://github.com/samr7/vanitygen/issues/20 for installing OpenSSL.
P.S. If any error is showing when running 'make', post output here. Someone will help you.
I found a better link - http://www.stanley-adams.co.uk/2013/12/custom-vanity-bitcoin-address/. Hope that helps you.
One question, how to run Vanitygen on my OS X? I don't know how to setup those files on Github.
Stupid Question - Is there a way to copy the Privkey from Commandprompt that i get after running vanitygen ? I hate typing it manually.
You just highlight it and copy as normally... Or make vanitygen output the keys to a txt file
Can't highlight anything at all :/
Edit : Now i can thanks han
Stupid Question - Is there a way to copy the Privkey from Commandprompt that i get after running vanitygen ? I hate typing it manually.
http://www.hacktrix.com/two-methods-to-select-copy-and-paste-text-in-cmd-or-command-prompt
Thank you! Never though it could be this easy
Can vanitygen be used to generate addresses for Dash (Darkcoin)?
If so anybody know which code to be used in vanitygen i.e. X 30 for Doge?
Thanks
If so anybody know which code to be used in vanitygen i.e. X 30 for Doge?
Thanks
There's a list of codes here - http://multicoinpool.org/index.php?page=vanity and here https://en.bitcoin.it/wiki/List_of_address_prefixes
Looks like Dash should be 76 but I have not yet imported any addresses created this way into a wallet.
True, it should be 76 and not 77 as I stated. Thanks for those additional links.
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
Stupid Question - Is there a way to copy the Privkey from Commandprompt that i get after running vanitygen ? I hate typing it manually.
http://www.hacktrix.com/two-methods-to-select-copy-and-paste-text-in-cmd-or-command-prompt
Stupid Question - Is there a way to copy the Privkey from Commandprompt that i get after running vanitygen ? I hate typing it manually.
You just highlight it and copy as normally... Or make vanitygen output the keys to a txt file
Stupid Question - Is there a way to copy the Privkey from Commandprompt that i get after running vanitygen ? I hate typing it manually.
Can vanitygen be used to generate addresses for Dash (Darkcoin)?
If so anybody know which code to be used in vanitygen i.e. X 30 for Doge?
Thanks
If so anybody know which code to be used in vanitygen i.e. X 30 for Doge?
Thanks
There's a list of codes here - http://multicoinpool.org/index.php?page=vanity and here https://en.bitcoin.it/wiki/List_of_address_prefixes
Looks like Dash should be 76 but I have not yet imported any addresses created this way into a wallet.
Can vanitygen be used to generate addresses for Dash (Darkcoin)?
If so anybody know which code to be used in vanitygen i.e. X 30 for Doge?
Thanks
EDIT: Found it... 77
List of codes can be found here https://en.bitcoin.it/wiki/List_of_address_prefixes
If so anybody know which code to be used in vanitygen i.e. X 30 for Doge?
Thanks
EDIT: Found it... 77
List of codes can be found here https://en.bitcoin.it/wiki/List_of_address_prefixes
Really?
Yes, really No lowercase 'L', no uppercase 'o', no uppercase 'i' and no '0' (number zero).If you used -i (case insensitive) it would have looked for 1koeLen (and 1KoeLen and 1KOeLen and 1KOELen, etc. etc.) - but the number it should have returned should have been very low then (as there's many more possible hits). If you used it with the -r (regex), then I think it accepts all those forbidden characters, but it wouldn't give an estimate of when it would be found (if I recall that correct).
But thanks to you i have one for myself now
Cheers
IIRC shouldn't the command be "D" not "d" when allocating GPUs?
Depends on how it's being addressed:-d
-D
Form:
Example: 0:0,grid=1024x1024
-p
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
I have been working with this s*** for at day now. I can get vanitygen.exe working no problem, but oclvanitygen.exe will not create a single/simple adress? What is the command line for creating a privkey for 1goat
I have tried oclvanitygen.exe -d 0 -i 1goat
What is not working here? oclvanityget has identitied my AMD GPU, but no result
UPDATE: It has to be a driver issue, because I can for the oclvanitygen to use the CPU and this works.... But why can the 7800 series GPU mine and not be used for vanitygen?
I have tried oclvanitygen.exe -d 0 -i 1goat
What is not working here? oclvanityget has identitied my AMD GPU, but no result
UPDATE: It has to be a driver issue, because I can for the oclvanitygen to use the CPU and this works.... But why can the 7800 series GPU mine and not be used for vanitygen?
IIRC shouldn't the command be "D" not "d" when allocating GPUs?
It has to be a driver issue, because I can for the oclvanitygen to use the CPU and this works.... But why can the 7800 series GPU mine and not be used for vanitygen?
Typically because the opencl stream isn't compatible with the hardware. That would need somebody reasonably familiar with OpenCL - and preferably with access to the hardware - to fix.That said - does it return an error, does it return GPU/CPU mismatches, or does it just sit there calculating forever not finding anything (while using the CPU - either via oclvanitygen or regular - does return results)?
Really?
Yes, really No lowercase 'L', no uppercase 'o', no uppercase 'i' and no '0' (number zero).If you used -i (case insensitive) it would have looked for 1koeLen (and 1KoeLen and 1KOeLen and 1KOELen, etc. etc.) - but the number it should have returned should have been very low then (as there's many more possible hits). If you used it with the -r (regex), then I think it accepts all those forbidden characters, but it wouldn't give an estimate of when it would be found (if I recall that correct).
For simply using Vanity with CMD , it sure shows me quite high time for finding 1koelen...... BTC address.
I don't think i have a chance to stumble on it
You don't - but then again, it shouldn't have shown you any time at all - the lowercase letter L is not allowed at all.I don't think i have a chance to stumble on it
If you meant "1koe1en", then it really shouldn't be too bad, especially with oclvanitygen, and especially with a decent GPU - certainly less than a day on average.
Really? It showed me around a year , i ran it for like 3 hours and then gave up since it really took all the juice of my System.
I will try 1koe1en
Thanks
I have been working with this s*** for at day now. I can get vanitygen.exe working no problem, but oclvanitygen.exe will not create a single/simple adress? What is the command line for creating a privkey for 1goat
I have tried oclvanitygen.exe -d 0 -i 1goat
What is not working here? oclvanityget has identitied my AMD GPU, but no result
UPDATE: It has to be a driver issue, because I can for the oclvanitygen to use the CPU and this works.... But why can the 7800 series GPU mine and not be used for vanitygen?
I have tried oclvanitygen.exe -d 0 -i 1goat
What is not working here? oclvanityget has identitied my AMD GPU, but no result
UPDATE: It has to be a driver issue, because I can for the oclvanitygen to use the CPU and this works.... But why can the 7800 series GPU mine and not be used for vanitygen?
For simply using Vanity with CMD , it sure shows me quite high time for finding 1koelen...... BTC address.
I don't think i have a chance to stumble on it
You don't - but then again, it shouldn't have shown you any time at all - the lowercase letter L is not allowed at all.I don't think i have a chance to stumble on it
If you meant "1koe1en", then it really shouldn't be too bad, especially with oclvanitygen, and especially with a decent GPU - certainly less than a day on average.
Jump to: