Topic: VEGA 64 mining FREE WISDOM (Read 10803 times)

Yea i guessed that though i was wondering if there s an app that allows to relatively Simply change the P0 P5 state, reboot the cards, remove crossfire, etc.

Yes, the OP is a total fucking moron scammer.

Didn't this turn out to become a scam?

Is there anything like qms that allows to modify all the tensions table easily for vega series on Windows with possibly latest drivers ?
As far as i understand, overdrivntool doesnt work for P1 P5 state for vega Under Windows ...

(i m new to vega 56, just have one rig and i m looking for an easy solution, i wont invest the same time as in RX series)
Many thanks in advance for your answer

If you reinstalled windows, and trying to use exact same miner and config as before, it could be that your opencl platform number changed. Trying changing this number somewhere in cast config file (i am not familiar with cast)

If you were changing some parameters in miners, it could be that you made a typo, or forgot to put "," somewhere

I run vega 64x8, windows 10-64.  cast was running greatn but I had to do a windows reinstall.  Downloaded current Cast version and drivers as before.  When I launch Cast it closes immediately.  You just see a black window, then nothing.  Please help.

QMS (Quick Miner Start) is the Crypto mining platform which consolidates and automates all known procedures on one easy User Interface, including two monitor windows with registry and real time info of the GPUs on your rig.

The VGA WEB MONITOR linked to QMS, came online 2 days ago so you can monitor your rigs from anywhere in the world, with an email alert service to notify you within max 5 minutes of gpu and/or rig drop.

The reason why we are using Crimson BlockChain and not Adrenalin, is because only this allows QMS to control ALL CPU/MEM/FAN states either globally/by range or individually per GPU in seconds. This has the same effect as flashing BIOS on the card without the risk of bricking it.

You only need to setup QMS ONE TIME, after that QMS defaults your last settings, miner path COM/ENV settings, saving them along side your own created PowerPlayTables, and here the uniqueness considering your case:

You should not apply the same PPT on all your cards as the silicon lottery and bad thermal paste (which is probably your problem), makes each GPU behave differently thus each GPU or range of GPUs needs a unique PPT to run at max efficiency. With QMS you can create and apply a PPT to a single or more GPUs in seconds and save it for instant application after rig crash/restart.

Once you have created the PPTs for your various GPUS and mined coin setings (eg settings for ETH mining are different to Cryptonight), the QMS DATA folder can be copied over to another rig for INSTANT QMS setup, so you don't have to do the same setup on other rigs. Truly 1 time setup across your whole Vega mining operation.

There are far too many QMS functions, whether user defined or automated, to describe here but i urge you to join our Slack channel for 1on1 support and suggestions from the VGA Dev. Team as well as experienced VGA community members.

If you decide to join the fast growing VGA community before speaking to us, please make sure to follow the explicit instructions on our site to avoid making costly mistakes that occurred to a couple of our members.

VGA is a community funded project with a ONE TIME membership fee that gives you instant and complete access to all VGA developments present and future.

Cutting miner setup time increases mining time thus profits and your own personal time. No more tedious time wasting.

VGA XMR 0fee pool is currently under inhouse testing and will become available to VGA members only in the coming days.

All info can be found on our site here:

https://vegatoken.org/

Anyone can download QMS for free and enjoy monitoring and various other free4all functions, but for full effect you need to be a member.

note to add:
We are currently coding the VGA All Coin 0fee Miner embedded on QMS which will boost mining speeds by a minimum of 20%, released to members after end of ITO in a couple of weeks (max Q4 2018 or sooner), complementing future VGA Compute Drivers and BIOS for warp speeds not imaginable yet.

Ofcourse you could just take the GPU apart (bricking risk) apply new thermal paste and hope that works with the a ppt created by someone else that defaults to 10rpm fan making it easier for one to toast the GPU.

Tradeoff = $700-$1000 per GPU vs a 0.5ETH one time fee for all VGA tech. present and future.

Thank you for the interest, and please feel free to ask our members of their experience so far, being part of the ever growing VGA community.

Pan. K.
VegaToken (VGA)
Oslo, Norway

My samsung Vega 56 is also suffering from high temps (upper 60s) causing drops in hashrates every now and then. Can you describe how QMS works and if this process can be done manually? I'm interested in automating it by buying your VGA token or membership but i would like to know how it works too.

I've done all the DDU, reinstalling, and reflashing of BIOS mod but still experiencing high temps.

on cryptonight:
56´s 1800-2000h/s  
64´s 1900-2100h/s

64´s draw a bit more power(+5%), most important thing is to get cards with good cooling(more then one fan).
ofc u want samsung memory.
You could biosflash your 56 to a 64 if u want.
For a faster Roi i would suggest 56 and for long term max profit the 64s.
For cryptonight heavy coins FE is bestbuy atm

I was going to buy a few Vega's what's the difference between the 56 and 64 when it comes to mining

Just buy vega 64's a lot of reference ones use Samsung memory.

I am going to purchase arround 100-120 Vega 64 cards.
But I am not sure which manufactory I should chose, I would prefere the standard Saphire.
But those are over priced and basically sold out.

The cheapest in my area would be from GigaByte manufactured then followed by PowerColor.
I don't know why, but my gut feelings say since PowerColour used at RX 580 micron memories, i tend more to GigaByte.

But now i stumbled up on this Video with FPS comparison of all Vega manufactures.
https://www.youtube.com/watch?v=rDaWiT-f2go

Ist there any similar comparison-table, just with hashrates?

Or can anyone tell, if he gets with the "registry edit" also ~2060 H/s (CryptonighV7) with the GigaByte cards ?
So is the memory overclockable to 1100Mhz ? like the sapphire ones i have here ?

And how about the Nitro+, i guess the GPU-RAM is not very different, like do they run more then 1100Hz stable?

This is very unusual as no user of QMS whether full member or not has reported such a fail.
It must be either a rig specific fail or you just misread the registry
QMS has been updated several times since your last post with no issues as reported by users
Join us on Slack for further assistance

https://vegatoken.org/

Tnx man
It seems the problem was the stupid ulps
I'll try QMS and update here
Edit:qms doesn't work properly...  At least with ULPS
Ty for your help btw

1. Download QMS http://vgaserver.tech/file/QMS.zip
2. Disconnect all GPUS from mobo and remove the 1070 from the rig
3. DDU.restart.DDU again if AMD or NVIDIA drivers are present clean and restart, DDU again until only INTEL drivers are present, then close DDU, shutdown
4. Connect 1 Vega, from Device Man. update driver/have disk.... to Blockchain Driver, when complete shut down.
5. Connect the remaining Vegas and power on, wait between 3-8 minutes do nothing.
6. Run QMS as Admin. free4all functions will auto disable crossfire/ulps on all cards and other functions and you now have a monitor to see the behavior of the bad card (with members version you would now start mining)
7. Do the reg changes you normally do (QMS is also a PPT editor and applies globally in seconds)
8. Use QMS set GPU P6-7, MEM P3 and Fan settings (same as NTool) global on the 4 and separate on the problem one
9. Start the miner and observe the bad gpu on the QMS monitor and adjust settings accordingly
10. If you like adventure add the NVIDIA card back on the rig after you just fixed it, sorry but you need a separate 5x1070 rig now ie 4 more

With QMS unlocked on member mode you can create the ppt of your choice in seconds and apply it to 1 or more gpus with 1 click, last settings are default for next powerup of pc miner starts in seconds
https://vegatoken.org/

Hope that helped

Hello again
I got serious problem with one specific gpu
It simply crashes, I've tried lowering oc,changing riser,pcie,swaping with other gpu,sppt...
Hbm temp is upper 60
Last thing i tried was uv the core and somehow burned the card it (when i cheked it smoke came from the fan and fan and back leds where off)...  
Some one plz help me befor i melt down my gpu
I have 6gpu rig (5 vega 64 mining xmr with cast and a single 1070 ti mining eth with claymore)2 vega on a 650 psu and rest on a 1200
Os is win 10

Maybe you should check this guide
http://vega.miningguides.com/

75 for hbm is to hot imo

i finally had a chance to buy 5 vega 64
im some how a new miner (6month) but its my first vega build (i have some experience with 580,570,1070,1070ti)
my vegas hbm2 runs hot (around 75) but core temp is ok(around 62)
question is is there any way to undervolt hbm2? does soft power play table help for uv hbm2?

Thanks! will update you soon.

very good article! interesting