Hey guys,
i'm closing the pool vtc.suprnova.cc because of low hash, please withdraw your funds asap
thanks
Topic: Vertcoin - 1 | ASIC - 0 | Lyra2RE | Decentralised | GPU Mineable | Open Source - page 117. (Read 415451 times)
January 07, 2015, 02:46:19 AM
January 06, 2015, 05:44:38 PM
Ok had some longer break... and what I see...
MON is not anymore merged mined with VTC ?? MON didnt switch to lyra??? I wont even mention MON is not anymore listed on any market... :/ What the hell..
Now I see VTC is merged mined with NEW coin ZVTC ??
Ok WHY?
First MON was mined together and on hard influenced on VTC price by downgrading it slowly .... (as all thought MON is highly worth... :/)
then MON was abandoned and VTC jumped to another... and here we go again SAME STORY :/
So after some months ZVTC will be abandoned... VTC will be left with lower again price...
Honestly... you should learn on mistakes ... not to repeat them :/
I have loads of VTC... more on MON .... and ... wont even continue to write more about it :/ Thats little sick...
MON is not anymore merged mined with VTC ?? MON didnt switch to lyra??? I wont even mention MON is not anymore listed on any market... :/ What the hell..
Now I see VTC is merged mined with NEW coin ZVTC ??
Ok WHY?
First MON was mined together and on hard influenced on VTC price by downgrading it slowly .... (as all thought MON is highly worth... :/)
then MON was abandoned and VTC jumped to another... and here we go again SAME STORY :/
So after some months ZVTC will be abandoned... VTC will be left with lower again price...
Honestly... you should learn on mistakes ... not to repeat them :/
I have loads of VTC... more on MON .... and ... wont even continue to write more about it :/ Thats little sick...
Monocle and Zerovert are not owned by the VTC devs and didn't switch to Lyra2RE and thus cannot be merge mined anymore. They may fork in the future but it is unclear if they will.
January 06, 2015, 05:19:07 PM
anyone some nodes for me?
My wallet is synching but it always shows 0 hours behind. Thanks
BTW: My account "voephilis" was hacked. So I have a new account :/
My wallet is synching but it always shows 0 hours behind. Thanks
BTW: My account "voephilis" was hacked. So I have a new account :/
You should be able to use pool.verters.com as a node.
January 06, 2015, 04:46:12 PM
Try dialing back xintensity to 32, see what happens.
Nothing changes... Still showing the same...
I am out of ideas. That difficulty seems kind of high, but is should not be the cause of the hw errors. For reference my cards running with difficulty at .008. Anything much higher, I start getting excessive stales.
Would you mind uploading your folder with all the cgminer files so that I can directly run what you have?
Might work, whoknows.
Hope it works for you. Let me know if you get the file as I never really do any uploads.
http://www.filedropper.com/sgminerlyra2re
January 06, 2015, 04:06:47 PM
Try dialing back xintensity to 32, see what happens.
Nothing changes... Still showing the same...
I am out of ideas. That difficulty seems kind of high, but is should not be the cause of the hw errors. For reference my cards running with difficulty at .008. Anything much higher, I start getting excessive stales.
Would you mind uploading your folder with all the cgminer files so that I can directly run what you have?
Might work, whoknows.
January 06, 2015, 04:01:18 PM
Try dialing back xintensity to 32, see what happens.
Nothing changes... Still showing the same...
I am out of ideas. That difficulty seems kind of high, but is should not be the cause of the hw errors. For reference my cards running with difficulty at .008. Anything much higher, I start getting excessive stales.
January 06, 2015, 03:54:29 PM
Try dialing back xintensity to 32, see what happens.
Nothing changes... Still showing the same...
January 06, 2015, 03:49:43 PM
Can I use anything other than Sgminer for mining Lyra2RE with AMD GPU?
Maybe that might fix my errors...
Maybe that might fix my errors...
Sgminer is the only available miner for AMD and Lyra2RE. Please try the config posted by the user above and send us another screenshot so we can help you further.
Using his config and replacing the Pool address, username & password to my own:
Code:
{
"pools" : [
{
"name" : "Verters",
"url" : "stratum+tcp://pool.verters.com:4444",
"user" : "PabiGamito.user",
"pass" : "password",
"priority" : "0",
"no-extranonce" : true,
"profile": "Lyra2RE"
}
],
"profiles" : [
{
"name" : "Lyra2RE",
"lookup-gap" : "2",
"algorithm" : "Lyra2RE"
}
],
"kernel" : "Lyra2RE",
"xintensity" : "64",
"worksize" : "128",
"shaders" : "2048",
"failover-only" : true,
"no-submit-stales" : true,
"lookup-gap" : "2,",
"auto-fan" : true,
"gpu-platform" : "0",
"gpu-engine" : "1020",
"gpu-memclock" : "1500",
"gpu-threads" : "2",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "72",
"temp-hysteresis" : "3",
"api-port" : "4028",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-network" : true,
"kernel-path" : "/usr/local/bin"
}
"pools" : [
{
"name" : "Verters",
"url" : "stratum+tcp://pool.verters.com:4444",
"user" : "PabiGamito.user",
"pass" : "password",
"priority" : "0",
"no-extranonce" : true,
"profile": "Lyra2RE"
}
],
"profiles" : [
{
"name" : "Lyra2RE",
"lookup-gap" : "2",
"algorithm" : "Lyra2RE"
}
],
"kernel" : "Lyra2RE",
"xintensity" : "64",
"worksize" : "128",
"shaders" : "2048",
"failover-only" : true,
"no-submit-stales" : true,
"lookup-gap" : "2,",
"auto-fan" : true,
"gpu-platform" : "0",
"gpu-engine" : "1020",
"gpu-memclock" : "1500",
"gpu-threads" : "2",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "72",
"temp-hysteresis" : "3",
"api-port" : "4028",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-network" : true,
"kernel-path" : "/usr/local/bin"
}
This is what I get:
Continuously showing Stratum connection to Verters interrupted.
Verters difficulty changed to 0.100
And on verters pool it shows as if the workers aren't active.
Try dialing back xintensity to 32, see what happens.
January 06, 2015, 03:43:24 PM
Can I use anything other than Sgminer for mining Lyra2RE with AMD GPU?
Maybe that might fix my errors...
Maybe that might fix my errors...
Sgminer is the only available miner for AMD and Lyra2RE. Please try the config posted by the user above and send us another screenshot so we can help you further.
Using his config and replacing the Pool address, username & password to my own:
Code:
{
"pools" : [
{
"name" : "Verters",
"url" : "stratum+tcp://pool.verters.com:4444",
"user" : "PabiGamito.user",
"pass" : "password",
"priority" : "0",
"no-extranonce" : true,
"profile": "Lyra2RE"
}
],
"profiles" : [
{
"name" : "Lyra2RE",
"lookup-gap" : "2",
"algorithm" : "Lyra2RE"
}
],
"kernel" : "Lyra2RE",
"xintensity" : "64",
"worksize" : "128",
"shaders" : "2048",
"failover-only" : true,
"no-submit-stales" : true,
"lookup-gap" : "2,",
"auto-fan" : true,
"gpu-platform" : "0",
"gpu-engine" : "1020",
"gpu-memclock" : "1500",
"gpu-threads" : "2",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "72",
"temp-hysteresis" : "3",
"api-port" : "4028",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-network" : true,
"kernel-path" : "/usr/local/bin"
}
"pools" : [
{
"name" : "Verters",
"url" : "stratum+tcp://pool.verters.com:4444",
"user" : "PabiGamito.user",
"pass" : "password",
"priority" : "0",
"no-extranonce" : true,
"profile": "Lyra2RE"
}
],
"profiles" : [
{
"name" : "Lyra2RE",
"lookup-gap" : "2",
"algorithm" : "Lyra2RE"
}
],
"kernel" : "Lyra2RE",
"xintensity" : "64",
"worksize" : "128",
"shaders" : "2048",
"failover-only" : true,
"no-submit-stales" : true,
"lookup-gap" : "2,",
"auto-fan" : true,
"gpu-platform" : "0",
"gpu-engine" : "1020",
"gpu-memclock" : "1500",
"gpu-threads" : "2",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "72",
"temp-hysteresis" : "3",
"api-port" : "4028",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-network" : true,
"kernel-path" : "/usr/local/bin"
}
This is what I get:
http://s7.postimg.org/paslosfsb/Screenshot_9.png
Continuously showing Stratum connection to Verters interrupted.
Verters difficulty changed to 0.100
And on verters pool it shows as if the workers aren't active.
January 06, 2015, 03:34:17 PM
Can I use anything other than Sgminer for mining Lyra2RE with AMD GPU?
Maybe that might fix my errors...
Maybe that might fix my errors...
Did you get error using the config posted above? Also, which build of sgminer are you using?
January 06, 2015, 02:44:16 PM
Can I use anything other than Sgminer for mining Lyra2RE with AMD GPU?
Maybe that might fix my errors...
Maybe that might fix my errors...
Sgminer is the only available miner for AMD and Lyra2RE. Please try the config posted by the user above and send us another screenshot so we can help you further.
January 06, 2015, 02:13:30 PM
Can I use anything other than Sgminer for mining Lyra2RE with AMD GPU?
Maybe that might fix my errors...
Maybe that might fix my errors...
January 06, 2015, 01:44:02 PM
jamesl22
Try this config, it works fine on PowerColor AX7970 with 950kH/s:
As it was mentioned by TheCoinFinder, you get a lot of HW errors, so, it looks like you have wrong conf of core/mem frequencies. Also, try to lower the worksize to 128.
Try this config, it works fine on PowerColor AX7970 with 950kH/s:
Code:
--kernel Lyra2RE --no-extranonce --auto-fan --auto-gpu --gpu-fan 75-100 --temp-target 75 --temp-overheat 85 -I18 -w 128 -g 2 --gpu-engine 1100 --gpu-memclock 1500 --lookup-gap 2 --gpu-powertune 20 -o stratum+tcp://pool.verters.com:4444
As it was mentioned by TheCoinFinder, you get a lot of HW errors, so, it looks like you have wrong conf of core/mem frequencies. Also, try to lower the worksize to 128.
Still getting the same error. I think it is something else though, and not the config or bat file. Is everyone else able to mine using pool.verts.com with Lyra2RE?
Give this config a try. This is what I am using on 3x Asus 280x dc2t @ 945 kH/s each.
Code:
{
"pools" : [
{
"name" : "p2pool",
"url" : "http://192.168.1.4:9171",
"user" : "VwV2J84P8mQggWgUv8ubCf6nJuAXHNoUce",
"pass" : "1234",
"priority" : "0",
"no-extranonce" : true,
"profile": "Lyra2RE"
}
],
"profiles" : [
{
"name" : "Lyra2RE",
"lookup-gap" : "2",
"algorithm" : "Lyra2RE"
}
],
"kernel" : "Lyra2RE",
"xintensity" : "64",
"worksize" : "128",
"shaders" : "2048",
"failover-only" : true,
"no-submit-stales" : true,
"lookup-gap" : "2,",
"auto-fan" : true,
"gpu-platform" : "0",
"gpu-engine" : "1020",
"gpu-memclock" : "1500",
"gpu-threads" : "2",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "72",
"temp-hysteresis" : "3",
"api-port" : "4028",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-network" : true,
"kernel-path" : "/usr/local/bin"
}
"pools" : [
{
"name" : "p2pool",
"url" : "http://192.168.1.4:9171",
"user" : "VwV2J84P8mQggWgUv8ubCf6nJuAXHNoUce",
"pass" : "1234",
"priority" : "0",
"no-extranonce" : true,
"profile": "Lyra2RE"
}
],
"profiles" : [
{
"name" : "Lyra2RE",
"lookup-gap" : "2",
"algorithm" : "Lyra2RE"
}
],
"kernel" : "Lyra2RE",
"xintensity" : "64",
"worksize" : "128",
"shaders" : "2048",
"failover-only" : true,
"no-submit-stales" : true,
"lookup-gap" : "2,",
"auto-fan" : true,
"gpu-platform" : "0",
"gpu-engine" : "1020",
"gpu-memclock" : "1500",
"gpu-threads" : "2",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "72",
"temp-hysteresis" : "3",
"api-port" : "4028",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-network" : true,
"kernel-path" : "/usr/local/bin"
}
January 06, 2015, 12:14:19 PM
good guys that like that mining, the question of how to encourage investors to buy vertcoins? Well I guess that it will be discharged to the 1satoshi?
January 06, 2015, 11:28:44 AM
jamesl22
Try this config, it works fine on PowerColor AX7970 with 950kH/s:
As it was mentioned by TheCoinFinder, you get a lot of HW errors, so, it looks like you have wrong conf of core/mem frequencies. Also, try to lower the worksize to 128.
Try this config, it works fine on PowerColor AX7970 with 950kH/s:
Code:
--kernel Lyra2RE --no-extranonce --auto-fan --auto-gpu --gpu-fan 75-100 --temp-target 75 --temp-overheat 85 -I18 -w 128 -g 2 --gpu-engine 1100 --gpu-memclock 1500 --lookup-gap 2 --gpu-powertune 20 -o stratum+tcp://pool.verters.com:4444
As it was mentioned by TheCoinFinder, you get a lot of HW errors, so, it looks like you have wrong conf of core/mem frequencies. Also, try to lower the worksize to 128.
Still getting the same error. I think it is something else though, and not the config or bat file. Is everyone else able to mine using pool.verts.com with Lyra2RE?
January 06, 2015, 10:34:10 AM
Ok had some longer break... and what I see...
MON is not anymore merged mined with VTC ?? MON didnt switch to lyra??? I wont even mention MON is not anymore listed on any market... :/ What the hell..
Now I see VTC is merged mined with NEW coin ZVTC ??
Ok WHY?
First MON was mined together and on hard influenced on VTC price by downgrading it slowly .... (as all thought MON is highly worth... :/)
then MON was abandoned and VTC jumped to another... and here we go again SAME STORY :/
So after some months ZVTC will be abandoned... VTC will be left with lower again price...
Honestly... you should learn on mistakes ... not to repeat them :/
I have loads of VTC... more on MON .... and ... wont even continue to write more about it :/ Thats little sick...
MON is not anymore merged mined with VTC ?? MON didnt switch to lyra??? I wont even mention MON is not anymore listed on any market... :/ What the hell..
Now I see VTC is merged mined with NEW coin ZVTC ??
Ok WHY?
First MON was mined together and on hard influenced on VTC price by downgrading it slowly .... (as all thought MON is highly worth... :/)
then MON was abandoned and VTC jumped to another... and here we go again SAME STORY :/
So after some months ZVTC will be abandoned... VTC will be left with lower again price...
Honestly... you should learn on mistakes ... not to repeat them :/
I have loads of VTC... more on MON .... and ... wont even continue to write more about it :/ Thats little sick...
January 06, 2015, 07:29:44 AM
jamesl22
Try this config, it works fine on PowerColor AX7970 with 950kH/s:
As it was mentioned by TheCoinFinder, you get a lot of HW errors, so, it looks like you have wrong conf of core/mem frequencies. Also, try to lower the worksize to 128.
Try this config, it works fine on PowerColor AX7970 with 950kH/s:
Code:
--kernel Lyra2RE --no-extranonce --auto-fan --auto-gpu --gpu-fan 75-100 --temp-target 75 --temp-overheat 85 -I18 -w 128 -g 2 --gpu-engine 1100 --gpu-memclock 1500 --lookup-gap 2 --gpu-powertune 20 -o stratum+tcp://pool.verters.com:4444
As it was mentioned by TheCoinFinder, you get a lot of HW errors, so, it looks like you have wrong conf of core/mem frequencies. Also, try to lower the worksize to 128.
January 05, 2015, 04:44:31 PM
You're getting an awful lot of "HW" errors.
By the way
THISISVTC:: Miners Help & Support
Lets get this forum going!
By the way
THISISVTC:: Miners Help & Support
Lets get this forum going!
January 05, 2015, 04:24:49 PM
{
"pools" : [
{
"url" : "stratum+tcp://pool.verters.com:4444",
"user" : "xxxx",
"pass" : "xxxx"
}
]
,
"intensity" : "13",
"worksize" : "256",
"kernel" : "Lyra2RE",
"algorithm" : "Lyra2RE",
"lookup-gap" : "2",
"gpu-threads" : "2",
"thread-concurrency" : "8192",
"gpu-engine" : "1020",
"gpu-memclock" : "1500",
"gpu-powertune" : "0",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "62",
"auto-fan" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "30",
"gpu-dyninterval" : "7",
"log" : "20",
"no-pool-disable" : true,
"queue" : "1",
"gpu-platform" : "0",
"scan-time" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"verbose" : "true",
}
Prob. this config! copy in your conf file!
January 05, 2015, 04:12:39 PM
I need help.
This is my config:
{
"pools" : [
{
"url" : "stratum+tcp://pool.verters.com:4444",
"user" : "xxxx",
"pass" : "xxxx"
}
]
,
"intensity" : "13",
"worksize" : "256",
"diff" : "128",
"kernel" : "Lyra2RE",
"algorithm" : "Lyra2RE",
"difficulty-multiplier" : "2",
"lookup-gap" : "2",
"gpu-threads" : "2",
"thread-concurrency" : "8192",
"gpu-engine" : "1020",
"gpu-memclock" : "1500",
"gpu-powertune" : "0",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "62",
"auto-fan" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "30",
"gpu-dyninterval" : "7",
"log" : "20",
"no-pool-disable" : true,
"queue" : "1",
"gpu-platform" : "0",
"scan-time" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"verbose" : "true",
"no-extranonce" : true
}
And when I launch sgminer.exe this is what I get. It connects to the pool but doesn't mine...
Would anyone be able to help me? I would greatly appreciate it.
This is my config:
{
"pools" : [
{
"url" : "stratum+tcp://pool.verters.com:4444",
"user" : "xxxx",
"pass" : "xxxx"
}
]
,
"intensity" : "13",
"worksize" : "256",
"diff" : "128",
"kernel" : "Lyra2RE",
"algorithm" : "Lyra2RE",
"difficulty-multiplier" : "2",
"lookup-gap" : "2",
"gpu-threads" : "2",
"thread-concurrency" : "8192",
"gpu-engine" : "1020",
"gpu-memclock" : "1500",
"gpu-powertune" : "0",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "62",
"auto-fan" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "30",
"gpu-dyninterval" : "7",
"log" : "20",
"no-pool-disable" : true,
"queue" : "1",
"gpu-platform" : "0",
"scan-time" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"verbose" : "true",
"no-extranonce" : true
}
And when I launch sgminer.exe this is what I get. It connects to the pool but doesn't mine...
Would anyone be able to help me? I would greatly appreciate it.
Remove the lines "diff" and "difficulty-multiplier" then report back.
Jump to: