Pages:
Author

Topic: Whattomine - profitability website with basic json. - page 16. (Read 94955 times)

sr. member
Activity: 798
Merit: 252
Insane In The Blockchain ⚠
It is an average diff, not sure why it would be wrong though. Can you explain what are you comparing it with?
Sum up diffs of every single block for the last 86400 seconds, divide by their count.
I get 1254: https://blockstats.pw/straks/
WTM shows almost 1600, so I'm also not sure how that is possbile Smiley

I'm running a node and use blocknotify to get data for each block and put it in DB.
Code:
SELECT COUNT(`diff`), SUM(`diff`) DIV COUNT(`diff`) FROM `straks_pow` WHERE `time` >= (UNIX_TIMESTAMP() - 86400)
Returns block count = 1290 (~67 sec per block, matches WTM) and 1254 avg diff.
legendary
Activity: 1537
Merit: 1005


@fredeq
Isnt it possible to change the web page layout so adding new algos doesnt need to remove other ones?
Cost, Sort, Volume, difficulty and exchange columns can go below algos in one single line then you can add 3 more algos Wink

That would be a solution, but currently all algos moving away from gpu section are a result of asics being introduced for those algos.
No point to keep those algos in the gpu section.

@Mikanoshi
Still alive and well Wink
It is an average diff, not sure why it would be wrong though. Can you explain what are you comparing it with?

@mmortal03
Will check last CN values and copy them to CNv7

@xiders
Unfortunately the block explorer that provided complete 5 algos diff api has been taken down.
I have reached out on discord to ask for a similiar api, but nothing so far.
Was using a clearnet node before for verge, probably will have to get it running again via tor.
newbie
Activity: 16
Merit: 0
Your calculator doesn't update any data on Verge (XVG) on any algo. The last displayed and calculated block on your website is 2134509 meanwhile real latest block at this moment is 2136791. Please fix your datasources!
legendary
Activity: 1762
Merit: 1011
The 280x and 750Ti cards don't have prefilled hashrate and power figures listed for CryptoNightV7. Can you guys fix this? Thanks!
sr. member
Activity: 798
Merit: 252
Insane In The Blockchain ⚠
fredeq Are you still alive? Grin
sr. member
Activity: 798
Merit: 252
Insane In The Blockchain ⚠
How WTM calculates avg diff? If it's a simple average then STRAKS diff is wrong, 15-30% higher than it should be.
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!


@fredeq
Isnt it possible to change the web page layout so adding new algos doesnt need to remove other ones?
Cost, Sort, Volume, difficulty and exchange columns can go below algos in one single line then you can add 3 more algos Wink
legendary
Activity: 1537
Merit: 1005
@Atexor
Havent processed it yet.

@YarMiner
Your logic looks sound and it should work for all coins.
Maybe you have wrong nethash values to start with?
newbie
Activity: 19
Merit: 0
Thanks for the incredibly useful website!
Only one thing makes me feel not enough happy is the number of coins for calculation.
I mean, everything is great but new mineable coins coming every day.
Yes, most of them are shitcoins, but another also our chance go to the moon Wink
In this case, I'm trying to calculate by myself profit from some new coins, but have a problem.
Let me explain...

I'm using this simple formula:
= /
= /
= *
= *
= -

Good news, it works for Ethash, Equihash, Lyra2v2, Skunkhash, Nist5, X16R, X11Gost, TimeTravel10, Xevan.
Bad news, it doesn't work for CryptoNight, NeoScrypt, and Groestl.

Why doesn't the formula work for all of the algorithms?
What is the correct way to calculate the profit?
Could somebody help me, please?
Thanks in advise!
member
Activity: 155
Merit: 10
Dear fredeq,
quite a time ago I've sent you request via form on your website about listing STRAKS. Could you take a look on it?
Thank you.
newbie
Activity: 109
Merit: 0
there is a new coin - https://bitcointalksearch.org/topic/annbuck-buck-low-fees-pow-equihash-no-tax-2828707. what are the conditions for adding to your service. Thank you.

Please use the contact form on the website and include all the required info.
Thank you.
legendary
Activity: 1537
Merit: 1005
there is a new coin - https://bitcointalksearch.org/topic/annbuck-buck-low-fees-pow-equihash-no-tax-2828707. what are the conditions for adding to your service. Thank you.

Please use the contact form on the website and include all the required info.
newbie
Activity: 109
Merit: 0
there is a new coin - https://bitcointalksearch.org/topic/annbuck-buck-low-fees-pow-equihash-no-tax-2828707. what are the conditions for adding to your service. Thank you.
newbie
Activity: 13
Merit: 0
@Navidz

Markets supported by the website are missing.
Will not list an algo which only coin runs as multi-algo. You can still calculate at single pages.

@lukemanz
Market added

Thanks  Wink
legendary
Activity: 1537
Merit: 1005
@Navidz

Markets supported by the website are missing.
Will not list an algo which only coin runs as multi-algo. You can still calculate at single pages.

@lukemanz
Market added
newbie
Activity: 13
Merit: 0
Hi.
Cryptopia already have DCR / BTC market.
When I calculate Decred and select Cryptopia, it only show Nicehash.
Could you help to add the DCR / BTC rate for Cryptopia?
https://www.cryptopia.co.nz/Exchange?market=DCR_BTC

It will be much appreciated. Thanks  Wink
newbie
Activity: 2
Merit: 0
hi
plz add BTCP and BTCZ to main equihash page for calculate profit.
also add x17 (xvg-verge) algo
tnx alot
legendary
Activity: 1537
Merit: 1005
Thanks for new algo and coins ...

You are welcome Smiley

BTX with TimeTravel10 algo was added. https://whattomine.com/coins/202-btx-timetravel10
RVN with X16R algo was added. https://whattomine.com/coins/234-rvn-x16r

Dont forget to tick the algos, recalculate adapt values and select CryptoBridge exchange if you want RVN.
For RVN you should input your hashrates over longer period of mining - it varies in time.
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
Thanks for new algo and coins ...
newbie
Activity: 140
Merit: 0
Nice website. Lists almost all coins/algo/hardwares. I seems a little bit complicated to use.
Pages:
Jump to: