[Work in progess] Burnins Avalon Chip to mining board service - page 120.

Min€r

sr. member

Activity: 359

Merit: 250

Quote from: g83 on July 11, 2013, 04:12:13 AM

Maybe Burnin could make a design for BFL and send it back to them :-)

Haha, we just too joked this moment about it.

Maybe he will find time to design a final board between bathroom & breakfast. But don`t want to spam this thread with BFL & just wanted to inform him.
So please keep this thread clean guys Wink

g83

sr. member

Activity: 448

Merit: 250

Super Smash Bros. Ultimate Available Now!

Maybe Burnin could make a design for BFL and send it back to them :-)

Min€r

sr. member

Activity: 359

Merit: 250

Hi Burnin,

maybe send me your shipping adress via PM - I should get some BFL sample chips & want to forward it to you just for testing purposes.
As we have too Avalon chips for 80 Bitburners (20x) we want to see some professional guy testing with our sample BFL chips. Maybe your tests & ideas will lead to constructive plans for a board or a project.

+1 - YOU are the best Grin

dani

hero member

Activity: 525

Merit: 500

..yeah

Another question to burnin:

I ordered several chips for me and a friend. Can I pay seperately for two orders? Also one in btc and one with bank-wire? (i live in germany Wink

)

Sukki

sr. member

Activity: 358

Merit: 250

Quote from: iikun on July 10, 2013, 11:42:13 PM

Quote from: RoadStress on July 10, 2013, 08:54:16 PM

Quote from: burnin on July 10, 2013, 12:48:59 PM

EMC test passed in the first go Grin

.
Officially compliant to EN55022 A, measured at TÜV-Nord.
That's not easily achieved with a naked board with huge dc/dc converters like this one.
Those who ever had to pass an emission tests can testify that.

When i said future versions I meant the production version, done some improvements to the design based on the prototype.
If that enables us to have them running at 450mhz - more test required.
I will do more extensive tests tomorrow, when I've fitted the production heat sink (which arrived yesterday).

I just realized that you achieved 341 Mhz without heatsink. Wow!

Is this true? Or was he running a prototype/alternative heatsink perhaps?

He was running with a prototype heatsink Wink

Dont think this would be posible without any.......

iikun

legendary

Activity: 1062

Merit: 1003

Quote from: RoadStress on July 10, 2013, 08:54:16 PM

Quote from: burnin on July 10, 2013, 12:48:59 PM

EMC test passed in the first go Grin

.
Officially compliant to EN55022 A, measured at TÜV-Nord.
That's not easily achieved with a naked board with huge dc/dc converters like this one.
Those who ever had to pass an emission tests can testify that.

When i said future versions I meant the production version, done some improvements to the design based on the prototype.
If that enables us to have them running at 450mhz - more test required.
I will do more extensive tests tomorrow, when I've fitted the production heat sink (which arrived yesterday).

I just realized that you achieved 341 Mhz without heatsink. Wow!

Is this true? Or was he running a prototype/alternative heatsink perhaps?

RoadStress

legendary

Activity: 1904

Merit: 1007

Quote from: burnin on July 10, 2013, 12:48:59 PM

EMC test passed in the first go Grin

.
Officially compliant to EN55022 A, measured at TÜV-Nord.
That's not easily achieved with a naked board with huge dc/dc converters like this one.
Those who ever had to pass an emission tests can testify that.

When i said future versions I meant the production version, done some improvements to the design based on the prototype.
If that enables us to have them running at 450mhz - more test required.
I will do more extensive tests tomorrow, when I've fitted the production heat sink (which arrived yesterday).

I just realized that you achieved 341 Mhz without heatsink. Wow!

bit_wizard

sr. member

Activity: 314

Merit: 250

Quote from: burnin on July 10, 2013, 12:48:59 PM

When i said future versions I meant the production version, done some improvements to the design based on the prototype.
If that enables us to have them running at 450mhz - more test required.
I will do more extensive tests tomorrow, when I've fitted the production heat sink (which arrived yesterday).

Thank you Sir.

mike2kt

member

Activity: 80

Merit: 10

Burnin-

I know everything is subject to change...but as the board is configured today, is the USB connector a Mini-B port or a Micro-B port?

Thank you for all your hard work!

-Mike

culexevilman

legendary

Activity: 1064

Merit: 1000

Bitcoin is too valuable to be used as a currency

yes, I cant wait for them... Cool

g83

sr. member

Activity: 448

Merit: 250

Super Smash Bros. Ultimate Available Now!

Quote from: dani on July 10, 2013, 04:23:57 PM

Quote from: g83 on July 10, 2013, 04:02:52 PM

Burnin is absolutely good in time and chips seem to be delivered sooooon

can you elaborate that?

https://bitcointalksearch.org/topic/m.2694806

dani

hero member

Activity: 525

Merit: 500

..yeah

Quote from: g83 on July 10, 2013, 04:02:52 PM

Burnin is absolutely good in time and chips seem to be delivered sooooon

can you elaborate that?

g83

sr. member

Activity: 448

Merit: 250

Super Smash Bros. Ultimate Available Now!

Burnin is absolutely good in time and chips seem to be delivered sooooon

jlsminingcorp

hero member

Activity: 493

Merit: 500

Hooray for non-equilibrium thermodynamics!

Quote from: burnin on July 10, 2013, 03:51:03 PM

Quote from: krasnolud on July 10, 2013, 03:49:07 PM

Quote from: burnin on July 10, 2013, 03:46:16 PM

Order date/time will (within reason) now be the determining factor (within a batch).

OK, I give up sleep until further notice.

I'll give you guys 24hrs warning through the email-newsletter.

Thanks burnin, a thoroughly professional job done on every aspect so far! Thank you.

CumpsD

sr. member

Activity: 476

Merit: 250

Quote from: burnin on July 10, 2013, 03:51:03 PM

Quote from: krasnolud on July 10, 2013, 03:49:07 PM

Quote from: burnin on July 10, 2013, 03:46:16 PM

Order date/time will (within reason) now be the determining factor (within a batch).

OK, I give up sleep until further notice.

I'll give you guys 24hrs warning through the email-newsletter.

I predict some webserver having a hard time 24h later

krasnolud

member

Activity: 109

Merit: 10

Quote from: burnin on July 10, 2013, 03:51:03 PM

Quote from: krasnolud on July 10, 2013, 03:49:07 PM

Quote from: burnin on July 10, 2013, 03:46:16 PM

Order date/time will (within reason) now be the determining factor (within a batch).

OK, I give up sleep until further notice.

I'll give you guys 24hrs warning through the email-newsletter.

Thanks.

dani

hero member

Activity: 525

Merit: 500

..yeah

Quote from: burnin on July 10, 2013, 03:46:16 PM

Quote from: dani on July 10, 2013, 01:04:34 PM

Good news.

Is the watercooling made of copper or aluminum? Any thoughts on price range for that? Hope it's cheap.. otherwise you force me to do my own Embarrassed

Aluminium, its optimized for cost. (2 Boards per cooler)
It will be around 50eur, 10 to 15 eur more then with air cooling per board.

Regarding the release of the sources:
I am going to release them when the first units reach the customers.
Have to recuperate the development- and running costs. Undecided

Paypal is problematic but i'll risk it with them.
To stop my EU-Customers from choosing it over normal wire transfers:
Order date/time will (within reason) now be the determining factor (within a batch).

Thanks! Just what I was hoping for. I seriously fell in love with you.

burnin

sr. member

Activity: 243

Merit: 250

ALTCOM Ab9upXvD7ChnJxDRZgMmwNNEf1ftCGWrsE

Quote from: krasnolud on July 10, 2013, 03:49:07 PM

Quote from: burnin on July 10, 2013, 03:46:16 PM

Order date/time will (within reason) now be the determining factor (within a batch).

OK, I give up sleep until further notice.

I'll give you guys 24hrs warning through the email-newsletter.

krasnolud

member

Activity: 109

Merit: 10

Quote from: burnin on July 10, 2013, 03:46:16 PM

Order date/time will (within reason) now be the determining factor (within a batch).

OK, I give up sleep until further notice.

burnin

sr. member

Activity: 243

Merit: 250

ALTCOM Ab9upXvD7ChnJxDRZgMmwNNEf1ftCGWrsE

Quote from: dani on July 10, 2013, 01:04:34 PM

Good news.

Is the watercooling made of copper or aluminum? Any thoughts on price range for that? Hope it's cheap.. otherwise you force me to do my own Embarrassed

Aluminium, its optimized for cost. (2 Boards per cooler)
It will be around 50eur, 10 to 15 eur more then with air cooling per board.

Regarding the release of the sources:
I am going to release them when the first units reach the customers.
Have to recuperate the development- and running costs. Undecided

Paypal is problematic but i'll risk it with them.
To stop my EU-Customers from choosing it over normal wire transfers:
Order date/time will (within reason) now be the determining factor (within a batch).

Topic: [Work in progess] Burnins Avalon Chip to mining board service - page 120. (Read 624205 times)