Someone has news, from bitburners zefir batch 2?
Someone got shipped?
Someone got shipped?
+1
Not for me, order #558 Zefir' Batch #2. Still says processing on webpage. Will that state change when they ship ?
Topic: [Work in progess] Burnins Avalon Chip to mining board service - page 46. (Read 624200 times)
September 07, 2013, 09:32:27 AM
+1
Not for me, order #558 Zefir' Batch #2. Still says processing on webpage. Will that state change when they ship ?
September 07, 2013, 09:23:12 AM
Someone has news, from bitburners zefir batch 2?
Someone got shipped?
Someone got shipped?
September 07, 2013, 08:06:14 AM
To clarify how to apply for a refund:
Just send an email stating you want one.
But i need to extra Informations:
Order number(s) > very important, saves me from having to look it up.
In case of paypal thats all.
Burnin,Just send an email stating you want one.
But i need to extra Informations:
Order number(s) > very important, saves me from having to look it up.
In case of paypal thats all.
When do you plan to perform the refunds?
In the next four weeks (he told me via email this morning).
September 07, 2013, 07:51:32 AM
To clarify how to apply for a refund:
Just send an email stating you want one.
But i need to extra Informations:
Order number(s) > very important, saves me from having to look it up.
In case of paypal thats all.
Burnin,Just send an email stating you want one.
But i need to extra Informations:
Order number(s) > very important, saves me from having to look it up.
In case of paypal thats all.
When do you plan to perform the refunds?
September 07, 2013, 07:42:32 AM
burnin i know you have lots of work to do, but besides FuryBoards i would also be interested in the BitMine's chips(CoinCraft) (https://bitmine.ch/?p=882) and i bet others will be too.
as always thank you for your hard work.
as always thank you for your hard work.
September 07, 2013, 06:20:47 AM
@ Burnin, ive sent you number of emails and I still didnt get any answer. Whats wrong mate??? Just drop me few lines of some meaningful answers and we both know where we are.
September 06, 2013, 01:24:37 PM
So I think the way this works is CGM reads the temperature of the board if the temperature is less than target the fan speed is reduced if temperature is greater than target fan speed is increased.
If you were to set the target temperature below the ambient air temperature then the fan would just run at full speed all the time.
If you were to set the target temperature below the ambient air temperature then the fan would just run at full speed all the time.
September 06, 2013, 12:16:24 PM
How to use the "--avalon-temp" I saw some people preffer avalon-temp 58 and some people preffer avalon-temp 30. What exactly are we setting here?
1) www.google.com2) search by "cgminer readme"
3) first hyperlink in search result
4) Ctrl+F -> avalon-temp
5) Read about avalon-temp option
Quote
--avalon-temp Set avalon target temperature (default: 50)
Target for what ? I assume it's for the fans to keep it cool. So the people using avalon-temp 58 are doing it wrong.
September 06, 2013, 11:09:30 AM
Any updates on Batch 2?
September 06, 2013, 08:35:27 AM
How to use the "--avalon-temp" I saw some people preffer avalon-temp 58 and some people preffer avalon-temp 30. What exactly are we setting here?
1) www.google.com2) search by "cgminer readme"
3) first hyperlink in search result
4) Ctrl+F -> avalon-temp
5) Read about avalon-temp option
September 06, 2013, 07:25:25 AM
How to use the "--avalon-temp" I saw some people preffer avalon-temp 58 and some people preffer avalon-temp 30. What exactly are we setting here?
September 06, 2013, 03:35:58 AM
How far have you been able push your 10 chip bitburner boards with cgminer?
Im getting a (5s) average of around 4Gh/s.. Im using part of the command found here buried deep in this thread..
--avalon-options 115200:2:10:29:415 --avalon-temp 58 --avalon-freq 415 --bitburner-voltage 1280 --avalon-fan 100 --queue 4
Im getting a (5s) average of around 4Gh/s.. Im using part of the command found here buried deep in this thread..
--avalon-options 115200:2:10:29:415 --avalon-temp 58 --avalon-freq 415 --bitburner-voltage 1280 --avalon-fan 100 --queue 4
That is around a 42% improvement over the stock 2.82 Ghash/s speed. WOW.
Thanks a lot for sharing the settings. I will try to apply them when I get my miner.
Do you mind saying which PS and setup your are using? Appreciated.
Thanks Kano for adding.
Its about sharing
September 05, 2013, 05:13:42 PM
... and change :29: to :d: and it sill calculate it for you and get it right based on whatever freq you use
September 05, 2013, 04:25:19 PM
How far have you been able push your 10 chip bitburner boards with cgminer?
Im getting a (5s) average of around 4Gh/s.. Im using part of the command found here buried deep in this thread..
--avalon-options 115200:2:10:29:415 --avalon-temp 58 --avalon-freq 415 --bitburner-voltage 1280 --avalon-fan 100 --queue 4
Im getting a (5s) average of around 4Gh/s.. Im using part of the command found here buried deep in this thread..
--avalon-options 115200:2:10:29:415 --avalon-temp 58 --avalon-freq 415 --bitburner-voltage 1280 --avalon-fan 100 --queue 4
you can omit the --avalon-freq 415. its already stated in your --avalon-options
September 05, 2013, 12:06:13 PM
How far have you been able push your 10 chip bitburner boards with cgminer?
Im getting a (5s) average of around 4Gh/s.. Im using part of the command found here buried deep in this thread..
--avalon-options 115200:2:10:29:415 --avalon-temp 58 --avalon-freq 415 --bitburner-voltage 1280 --avalon-fan 100 --queue 4
Im getting a (5s) average of around 4Gh/s.. Im using part of the command found here buried deep in this thread..
--avalon-options 115200:2:10:29:415 --avalon-temp 58 --avalon-freq 415 --bitburner-voltage 1280 --avalon-fan 100 --queue 4
September 05, 2013, 09:49:27 AM
I would like a clear satement from Burnin how he wants to handle those orders that
wish to convert to the Bitfury chips. Are we to place all new orders with a distributor?
How will the 70% refund from the Bitburners applied? I would hope that Burnin shows
the same loyalty that he receives from us customers who are willing to work with him,
and handles these trade-ins himself ot at lest makes sure that these customers are
taking care properly. Otherwise would what be the point in not requesting a full refund
now? Burnin, I posed this question now several times and I would appreciate a reply.
wish to convert to the Bitfury chips. Are we to place all new orders with a distributor?
How will the 70% refund from the Bitburners applied? I would hope that Burnin shows
the same loyalty that he receives from us customers who are willing to work with him,
and handles these trade-ins himself ot at lest makes sure that these customers are
taking care properly. Otherwise would what be the point in not requesting a full refund
now? Burnin, I posed this question now several times and I would appreciate a reply.
I have not yet responded to that because i have not decided that yet.
Just to make one thing clear here:
if i do Bitfury boards or am able to sell the components/boards everyone will get those extra 20% (or even more) back.
I hope there is no deadline for applying for refunds. I will wait your decision regarding the order conversion before applying for it or refund because i think it's a lot easier to do the conversion than the refunds.
Thank you.
September 05, 2013, 07:03:00 AM
Thanks for the reply. I have had all my chips refunded now, in the hope I can convert my bitburner orders into Bitfurys.
September 05, 2013, 12:09:46 AM
I would like a clear satement from Burnin how he wants to handle those orders that
wish to convert to the Bitfury chips. Are we to place all new orders with a distributor?
How will the 70% refund from the Bitburners applied? I would hope that Burnin shows
the same loyalty that he receives from us customers who are willing to work with him,
and handles these trade-ins himself ot at lest makes sure that these customers are
taking care properly. Otherwise would what be the point in not requesting a full refund
now? Burnin, I posed this question now several times and I would appreciate a reply.
wish to convert to the Bitfury chips. Are we to place all new orders with a distributor?
How will the 70% refund from the Bitburners applied? I would hope that Burnin shows
the same loyalty that he receives from us customers who are willing to work with him,
and handles these trade-ins himself ot at lest makes sure that these customers are
taking care properly. Otherwise would what be the point in not requesting a full refund
now? Burnin, I posed this question now several times and I would appreciate a reply.
I have not yet responded to that because i have not decided that yet.
Just to make one thing clear here:
if i do Bitfury boards or am able to sell the components/boards everyone will get those extra 20% (or even more) back.
And the reason for no full refunds is very simple: that money is gone,
or more precisely it is lying around in form of electronic components/boards/heatsinks/fans/mounting brackets/screws/cables.
This is a single purpose venture, no other branches from where money for a full refund could come from.
And it is in your interest to keep it alive so am able to liquidize those assets back into money.
Oh and don't get the false impression the other 50% is my margin, the 50% are just the material costs
on top of that comes labor for assembly.
Thank you for your reply. And yes, we do understand the dire predicament you are in through no fault of yours, and
that is another reason I would like to continue to work with you and support you in your effort for us smaller miners.
I have followed your DIY effort for the Bitfury chips for quite some time and am very interested in the Bitfury boards.
September 04, 2013, 11:15:52 PM
ok great, thanks for a clearing this up, is this the thread we should watch for an eventual decision?
September 04, 2013, 10:15:16 PM
I would like a clear satement from Burnin how he wants to handle those orders that
wish to convert to the Bitfury chips. Are we to place all new orders with a distributor?
How will the 70% refund from the Bitburners applied? I would hope that Burnin shows
the same loyalty that he receives from us customers who are willing to work with him,
and handles these trade-ins himself ot at lest makes sure that these customers are
taking care properly. Otherwise would what be the point in not requesting a full refund
now? Burnin, I posed this question now several times and I would appreciate a reply.
wish to convert to the Bitfury chips. Are we to place all new orders with a distributor?
How will the 70% refund from the Bitburners applied? I would hope that Burnin shows
the same loyalty that he receives from us customers who are willing to work with him,
and handles these trade-ins himself ot at lest makes sure that these customers are
taking care properly. Otherwise would what be the point in not requesting a full refund
now? Burnin, I posed this question now several times and I would appreciate a reply.
I have not yet responded to that because i have not decided that yet.
Just to make one thing clear here:
if i do Bitfury boards or am able to sell the components/boards everyone will get those extra 20% (or even more) back.
And the reason for no full refunds is very simple: that money is gone,
or more precisely it is lying around in form of electronic components/boards/heatsinks/fans/mounting brackets/screws/cables.
This is a single purpose venture, no other branches from where money for a full refund could come from.
And it is in your interest to keep it alive so am able to liquidize those assets back into money.
Oh and don't get the false impression the other 50% is my margin, the 50% are just the material costs
on top of that comes labor for assembly.
Jump to: