Topic: [Work in progess] Burnins Avalon Chip to mining board service - page 71. (Read 624200 times)
August 09, 2013, 07:56:46 PM
No the 240 chip Avalon one.
August 09, 2013, 07:05:11 PM
8 Bitburners in a stack:
Mine, all mine...(oops :-)
Nice, but why they are all upside down?
Are you using a RasPi to connect them to the internet?
Which avalons units? These ones?
https://www.cardreaderfactory.com/shop/hash-unit.html
August 09, 2013, 06:30:57 PM
8 Bitburners in a stack:
Mine, all mine...(oops :-)
Nice, but why they are all upside down?
Are you using a RasPi to connect them to the internet?
August 09, 2013, 06:23:13 PM
Those photos are porn for me *.*
August 09, 2013, 05:28:51 PM
8 Bitburners in a stack:
Mine, all mine...(oops :-)
Nice, but why they are all upside down?
Heatsinks up, warm air goes up, it seems logical this way. They can only cool the same or better this side up.
August 09, 2013, 05:15:10 PM
Turn your back on the forum for 2 hours and *BAM* tons of problems.
BenTuras you need to terminate the CAN-BUS on both ends, there have to be two jumpers placed on the pins next to the LEDs.
read my mail for details.
You can also power 2 boards with just one single power cord by connecting the second one via standard wires:
Cool... thats my route then... easy way.
Edit: How many boards can i connect this way? Theoretically so much like the 12A-connector from the psu can deliver?
Bridging 2 Boards like that is safe.
If you are not doing heavy overclocking you could do 3 but i would not recommend it.
Use 1.5mm^2 or thicker SOLID copper cable for the bridges.
I am currently working on the Instructions manual.
BenTuras you need to terminate the CAN-BUS on both ends, there have to be two jumpers placed on the pins next to the LEDs.
read my mail for details.
You can also power 2 boards with just one single power cord by connecting the second one via standard wires:
Cool... thats my route then... easy way.
Edit: How many boards can i connect this way? Theoretically so much like the 12A-connector from the psu can deliver?
If you are not doing heavy overclocking you could do 3 but i would not recommend it.
Use 1.5mm^2 or thicker SOLID copper cable for the bridges.
I am currently working on the Instructions manual.
I would run them at nearly 100W each... i guess its a good way to save at least some parts. I wonder what would be the risk when a psu has for example 400W at one 12A line and i would power one board directly and 3 others with cables? I could use 3mm speaker cables if that helps...
August 09, 2013, 05:06:07 PM
Turn your back on the forum for 2 hours and *BAM* tons of problems.
BenTuras you need to terminate the CAN-BUS on both ends, there have to be two jumpers placed on the pins next to the LEDs.
read my mail for details.
You can also power 2 boards with just one single power cord by connecting the second one via standard wires:
Cool... thats my route then... easy way.
Edit: How many boards can i connect this way? Theoretically so much like the 12A-connector from the psu can deliver?
Bridging 2 Boards like that is safe.
If you are not doing heavy overclocking you could do 3 but i would not recommend it.
Use 1.5mm^2 or thicker SOLID copper cable for the bridges.
I am currently working on the Instructions manual.
BenTuras you need to terminate the CAN-BUS on both ends, there have to be two jumpers placed on the pins next to the LEDs.
read my mail for details.
You can also power 2 boards with just one single power cord by connecting the second one via standard wires:
Cool... thats my route then... easy way.
Edit: How many boards can i connect this way? Theoretically so much like the 12A-connector from the psu can deliver?
If you are not doing heavy overclocking you could do 3 but i would not recommend it.
Use 1.5mm^2 or thicker SOLID copper cable for the bridges.
I am currently working on the Instructions manual.
August 09, 2013, 04:10:08 PM
8 Bitburners in a stack:
Mine, all mine...(oops :-)
Nice, but why they are all upside down?
Don't they make USD via ACH when they are upside down?
August 09, 2013, 04:07:48 PM
8 Bitburners in a stack:
Mine, all mine...(oops :-)
Nice, but why they are all upside down?
August 09, 2013, 03:48:53 PM
8 Bitburners in a stack:
Mine, all mine...(oops :-)
Nice, but why they are all upside down?
August 09, 2013, 03:42:01 PM
Didnt get the shipment today but looks good your stack there...
Can you tell me what power-y-cable you used?
You can also power 2 boards with just one single power cord by connecting the second one via standard wires:
Cool... thats my route then... easy way.
Edit: How many boards can i connect this way? Theoretically so much like the 12A-connector from the psu can deliver?
August 09, 2013, 03:39:55 PM
Didnt get the shipment today but looks good your stack there...
Can you tell me what power-y-cable you used?
You can also power 2 boards with just one single power cord by connecting the second one via standard wires:
August 09, 2013, 03:24:48 PM
Didnt get the shipment today but looks good your stack there...
Can you tell me what power-y-cable you used?
Ah ok... then i have to search myself what i need.
August 09, 2013, 03:21:54 PM
Didnt get the shipment today but looks good your stack there...
Can you tell me what power-y-cable you used?
August 09, 2013, 03:02:43 PM
Didnt get the shipment today but looks good your stack there...
Can you tell me what power-y-cable you used?
August 09, 2013, 02:51:11 PM
8 Bitburners in a stack:
There are some software(?) issues, I am in contact with Bitburner. More to come.
There are some software(?) issues, I am in contact with Bitburner. More to come.
damn, that looks sexy as hell
August 09, 2013, 02:41:20 PM
Nice...
August 09, 2013, 02:40:56 PM
:-)
August 09, 2013, 02:33:49 PM
8 Bitburners in a stack:
There are some software(?) issues, I am in contact with Bitburner. More to come.
There are some software(?) issues, I am in contact with Bitburner. More to come.
August 09, 2013, 01:53:22 PM
for those looking to get out from under orders since avalon hasn't shipped chips PM me
Jump to: