Topic: [WORLDWIDE]Bitmine - 950 GH/S 1500 USD - Next day delivery. (Read 59959 times)

Of course he is .

Never repsonded to my last emails.

I have purchased +10 units and half were not working.

I think he scammed others worse than me.

is the op confirmed scammer?

As I can see in this thread nothing has changed about these chinese unethical business practices. they need a good American ass whoopin if you ask me. I got a dragon miner, and mind you I have ordered a lot of equipment from this company so far. When the miner arrived it had a horrible power problem would overheat and shut down. Had HUGE hardware errors and rejects compared to the other ones we ordered. So i opened the case, as I am opening it I notice a lot and I mean a lot of scratches on this case top bottom sides and all. scratches everywhere. once opened what do I notice lower quality replacement fans have been installed then Oh no look at that one of the ASIC chips is not working (must be burnt out from over use or overclocking) I clean the machine up and mess a little with the module in hopes to get the ASIC to maybe register. No use closed the machine and then start it back up and see the temps are running 9 degrees hotter than all the other machines.

What does this unethical company in china do just ignore my requests. I have ordered a lot of equipment from them thru Aliexpress. what does Aliexpress do disconnect every single chat session you start as soon as you beginh to explain the seller is selling used products and advertising them as new.

Aliexpress is ran by Alibaba, Alibaba POI was why all the chinese sold their BTC and killed its value a few weeks ago. For a country whose people are so awesome at economy and finance, it seems they are quite stupid on how to secure an investment. why would purposely destroy the value of BTC when you manufacture and sell a lot fo the miners used in that industry.

All in all I need some replacement parts for this miner and would love to get about 30 people who really are ready to go to china and get our refunds. I havemy ballbat ready, and if they confiscate it at the terminat, ill grab something off their wall in china, a crow bar, a pipe hell I dont care even a damn rock because we all know china defense weapons are manufactured JUST LIKE thier miners, you have a better shot of cracking them in the face with a brick that they do of shooting you in the foot, even if they do fire that weapon it will probably shoot the bullet sideways or the gun will blow up in their face.

So if you have some spare broken dragon miners please contact me we can discuss pricing for me to purchase them.

now it is doing this
http://postimg.org/image/41g88szpb/
then it drops after 10 min with the new sd card.

Did you try with a different SD card to see if it is an issue with the SD itself?

DONE here...

You are on your own, buddy ...

ZiG

my www.lketc.com 1 ths miner keeps on dropping the 4th blade.  any advice. i re-flashed the sd card it picked up the blade for 10 min and mined at full speed then it deleted the blade has to reformat the sd card found it again and repeated the same thing. it keeps on deleting blade 3. how do i fix it from deleting blade 3?  sick of having to re do the sd card every 10 min. it will lose the blade every 10 min. it even be removed from the list and just blinks green.   

+1

Shipping from china:

Its always agent company who will do forwarding from shenzen china to HongKong DHL terminal. These shipping agents gets lowest faires from DHL.

At worst scenario they gave miners to agent and paid cash... so you are looking a guy named Ali in Shenzen at that point.

Unfortunately that will just be the freight forwarding agent.

i doubt but maybe this will help something
http://imgur.com/d9Gnl8h
its shipping label from my miner

Geez that was fast!   

Just goes to show, gotta use escrow almost all of time.  Just up and disappeared without a trace...

Yeah, it's pretty shameful how they cut and run.

No result in this yet?
They were good startup but went to scam pretty soon.

All these middle man suppliers claim... no reason to use Escrow. I'm so happy when i jumped this ship i chose to Escrow. Got my money back from Ognasty.

Seems like we are DONE here...

Finito la comedia...Capisco...

Cheers,

ZiG

 Looks like they pulled a runner. We got bamboozled :|

Any news here?

Or the OP is gone?

I have not had any luck getting in contact with them lately either.
Once I hear back from them I will post here about it.  I am not sure what is going on.

Have been advised numbers on the capacitor are okay however it could be quality causing the issues.

Have ordered some surface mounts but I am definitely hashing better than I was before this.

Doing about 800ghs now was doing 600-700ghs

If anyone who has missing caps does try anything if you could let me know how you go it would be awesome

Thanks!

Sadly being ignored through both emails:
david@bittech and contact@bittech

On another note - I replaced the capacitor with just a standard 470uf 16v capacitor. Doesn't even need to be surface mounted and seem to have a bit of success on a missing cap on the board.

I don't think its quite right yet though as the Utility side on the stats side is showing half of what it needs to be.
Not sure if it is cap charging up or whatever.

However for those of you missing caps you would be able to find these caps in any electronics shop.

I believe they just need to be a electrolytic capacitor. And you need to get the numbers right. Cap showing 180uf and 16v but was told 470uf 16v was okay.

If i am however wrong on the numbers please someone advise me and I can try a different cap.

When soldering cap please make negative pointing into the module. Positive is the part closest to the edge of the module or you will blow the cap.

https://i.imgur.com/kYbShUF.jpg

The way I was able to communicate with them was through email, [email protected] or [email protected].