Topic: [WTS] WIFI Bitcoin And Altcoin Price Ticker Screen - afkdata.com - page 15. (Read 20473 times)
March 15, 2016, 05:29:54 AM
Expected ETA for my order?
March 15, 2016, 03:52:28 AM
The click me link on the site where you say the color and email/Twitter/Reddit is the official wait list, gets you a couple of days head start on the general public at a minimum.
March 15, 2016, 03:47:57 AM
Everyone who has ordered got a email about an issue setting up the devices with iPhones/iPads with an update link that fixes the issue. Message me if you didn't get it, or have problems updating it. All devices from now on will have this fixed by default.
Had 2 WIFI boards turn up today, this is probably not enough to open orders again. Need one of my larger orders to come in.
At least I can get started building them again
PS: also got the 3d printed stands, they seem to fall over easier then I would have liked but do work, perhaps someone could design something better. I might have another crack at some stage.
Had 2 WIFI boards turn up today, this is probably not enough to open orders again. Need one of my larger orders to come in.
At least I can get started building them again
PS: also got the 3d printed stands, they seem to fall over easier then I would have liked but do work, perhaps someone could design something better. I might have another crack at some stage.
Hey maybe start a waiting list for the next batch.......
1) Searing (heh) 3 units
just saying.......but on the other hand everyone checking your site is making it plenty active and if you had an old web counter,,it would really be a spinning I would imagine...with everyone on 1x a day hitting 'refresh' seeing 'out of stock' then yelling "damn it" ...and repeating these actions the next day
the old 'build a better mousetrap and the world will beat a path to your door dilemma
anyway ...still in waiting room ..blue haired older lady next to me keeps 'patting my knee' and the elevator type music is still driving me crazy
considering 'raiding' the kids area and the Lincoln log set.....kinda sick of the golf digest magazines......(place needs a new coat of paint too boot)
tweedles thumbs
March 15, 2016, 03:12:35 AM
Everyone who has ordered got a email about an issue setting up the devices with iPhones/iPads with an update link that fixes the issue. Message me if you didn't get it, or have problems updating it. All devices from now on will have this fixed by default.
Had 2 WIFI boards turn up today, this is probably not enough to open orders again. Need one of my larger orders to come in.
At least I can get started building them again
PS: also got the 3d printed stands, they seem to fall over easier then I would have liked but do work, perhaps someone could design something better. I might have another crack at some stage.
Had 2 WIFI boards turn up today, this is probably not enough to open orders again. Need one of my larger orders to come in.
At least I can get started building them again
PS: also got the 3d printed stands, they seem to fall over easier then I would have liked but do work, perhaps someone could design something better. I might have another crack at some stage.
March 13, 2016, 06:26:39 PM
Let me know when you have some green ones back in stock.
Thanks.
w4tchd0ggz.
Thanks.
w4tchd0ggz.
March 13, 2016, 03:18:18 PM
what is the shipping cost to uk?
$17.50. Pretty certain it's a flat rate. March 13, 2016, 10:50:48 AM
what is the shipping cost to uk?
March 13, 2016, 12:17:58 AM
hmmmm....waits impatently......looks around (forum is dusty) ....twiddles thumbs.......listens to the 'elevator music' .......picks butt.....goes back to twiddling thumbs
sigh
(I want 3 of them eventually)
goes back to reading 'golf digest' in the http://afkdata.com waiting room
yawn!
March 12, 2016, 04:37:52 PM
Anyone with an order that's shipped already wont have the stand, you can get it printed near you for very cheap on some place like 3dhubs.com .
Again if you have a high shelf or table, you wont need either nuts or stands.
I have a 3D printer at my current job so I could (and would) print this myself if it speeds up my order. Again if you have a high shelf or table, you wont need either nuts or stands.
March 12, 2016, 04:35:32 PM
Ooooh, yeah, this would be a lot better!
Anyone with an order that's shipped already wont have the stand, you can get it printed near you for very cheap on some place like 3dhubs.com .
Again if you have a high shelf or table, you wont need either nuts or stands.
March 12, 2016, 04:33:51 PM
Sounds good! That stand looks very very basic though. How/where will it be used?
To replace the two stacks of three nuts in the photos on the website.
March 12, 2016, 04:32:42 PM
Sounds good! That stand looks very very basic though. How/where will it be used?
To replace the two stacks of three nuts in the photos on the website.
If you have a high shelf or table, you wont need either.
March 12, 2016, 04:13:31 PM
Sounds good! That stand looks very very basic though. How/where will it be used?
March 12, 2016, 03:03:10 PM
Good news is I won't run out of LCDs for a while, bad news is I have only got 2 wifi modules (was ordering lots of batches of 2 to avoid shipping). I need the batch of 40 to arrive. I got another soldering iron yesterday so I'm back building the bits I can. Ordered a good Hakko iron that I should get at the end of the week, the cheap one will just be backup.
I got an email from my 3d printing guy the next batch of those parts are in. I also have him printing some stands to prop up the front.
I got an email from my 3d printing guy the next batch of those parts are in. I also have him printing some stands to prop up the front.
March 12, 2016, 06:04:06 AM
March 09, 2016, 09:40:02 AM
All orders have shipped out, had a little hiccup last night when my soldering iron broke 
I hit it on the table in frustration and it started working again, crisis averted
I will be off to the shops this weekend to get a new one.
No more WIFI boards have arrived yet, I had hoped a few might be in the mail so I could get started building the next batch, no such luck.
Also had good news from two customers, they received there devices today!
PS: Blazed I have redone the shipping calcs to the US using Express Post International with two different box sizes the existing methods of sending 2 and 3 devices are included for comparison, the figure at the bottom in each tab in USD is shipping per device.
Think its just expensive from AUS
I hit it on the table in frustration and it started working again, crisis averted
I will be off to the shops this weekend to get a new one.
No more WIFI boards have arrived yet, I had hoped a few might be in the mail so I could get started building the next batch, no such luck.
Also had good news from two customers, they received there devices today!
PS: Blazed I have redone the shipping calcs to the US using Express Post International with two different box sizes the existing methods of sending 2 and 3 devices are included for comparison, the figure at the bottom in each tab in USD is shipping per device.
Think its just expensive from AUS
March 09, 2016, 07:47:57 AM
Hey,
I just got the email regarding the shipping.
Will update you all once i receive the package.
Fingers crossed
Regards
duke
I just got the email regarding the shipping.
Will update you all once i receive the package.
Fingers crossed
Regards
duke
March 09, 2016, 06:53:23 AM
sol out Let me know when you have more back in stock I would like one of these for my office
Let me know when you have more back in stock I would like one of these for my office 
March 08, 2016, 08:56:42 PM
Seems the group buy option does not save enough to be worth all of the effort. I will just take 2 of the blue and white models please.
March 08, 2016, 03:05:53 PM
Thought so, haha. So to summarize: I'm not going to start a group buy for these, but I can't wait to receive my order.
no problem
Jump to: