XMOS - Light Weight Linux Base ETH Mining OS - Optimal for Nvidia GPU V2.0 - page 2.

taterbum

newbie

Activity: 5

Merit: 0

Quote from: taterbum on December 21, 2017, 01:37:46 AM

Quote from: overcool on December 21, 2017, 01:08:58 AM

Quote from: taterbum on December 20, 2017, 05:35:41 PM

Thanks Overcool for the response.

Ya, I'm missing something.

I have the following in setup config.

My_Rig="auto"
My_Address="0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB"

I still get the same error

Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.2FE64R

I see the "Auto" did change the rig name at the end of the string, but it still bangs out with Invalid Argument. I've tried 3 different ETH wallet addresses in the address line, and while the string changes to reflect the value change, I still get Invalid Argument. Any ideas?

Thanks a million,

-Tate

which pool you are mining on..?

Dwafrpool. Though I switched the config to mine on ethpool to test and got the same bang.

Lets see..
Dwarfpool I used this var. I also tried with/without ports. Not using stratproxy

Pool1="eth-us2.dwarfppol.com:80"

Ethpool I used this var

Pool1="eu1.ethpool.org:3333"

-Tate

Also for shits-n-giggles I used port 8008 just now on Dwarf to see....same results invalid argument

-Tate

taterbum

newbie

Activity: 5

Merit: 0

Quote from: overcool on December 21, 2017, 01:08:58 AM

Quote from: taterbum on December 20, 2017, 05:35:41 PM

Thanks Overcool for the response.

Ya, I'm missing something.

I have the following in setup config.

My_Rig="auto"
My_Address="0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB"

I still get the same error

Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.2FE64R

I see the "Auto" did change the rig name at the end of the string, but it still bangs out with Invalid Argument. I've tried 3 different ETH wallet addresses in the address line, and while the string changes to reflect the value change, I still get Invalid Argument. Any ideas?

Thanks a million,

-Tate

which pool you are mining on..?

Dwafrpool. Though I switched the config to mine on ethpool to test and got the same bang.

Lets see..
Dwarfpool I used this var. I also tried with/without ports. Not using stratproxy

Pool1="eth-us2.dwarfppol.com:80"

Ethpool I used this var

Pool1="eu1.ethpool.org:3333"

-Tate

overcool

newbie

Activity: 63

Merit: 0

Quote from: taterbum on December 20, 2017, 05:35:41 PM

Thanks Overcool for the response.

Ya, I'm missing something.

I have the following in setup config.

My_Rig="auto"
My_Address="0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB"

I still get the same error

Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.2FE64R

I see the "Auto" did change the rig name at the end of the string, but it still bangs out with Invalid Argument. I've tried 3 different ETH wallet addresses in the address line, and while the string changes to reflect the value change, I still get Invalid Argument. Any ideas?

Thanks a million,

-Tate

which pool you are mining on..?

taterbum

newbie

Activity: 5

Merit: 0

Thanks Overcool for the response.

Ya, I'm missing something.

I have the following in setup config.

My_Rig="auto"
My_Address="0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB"

I still get the same error

Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.2FE64R

I see the "Auto" did change the rig name at the end of the string, but it still bangs out with Invalid Argument. I've tried 3 different ETH wallet addresses in the address line, and while the string changes to reflect the value change, I still get Invalid Argument. Any ideas?

Thanks a million,

-Tate

overcool

newbie

Activity: 63

Merit: 0

Quote from: taterbum on December 19, 2017, 11:16:27 PM

Hi Overcool,

This is exactly what I'm looking for as a Windows guy looking to shed Win10 and get into Linux. I applogies in advance for the stupid questions Wink

My main issue right now is I'm getting:

Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon
Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon
Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon
Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon

It doesn't seem to matter what I enter in the fields below, I get invalid argument. I even used my pools donate wallet address and got the same bang.
My_Rig=""
My_Address=""

Any help would rock Cheesy

Thanks a million,

Tate

hi,

My_Rig="" ## PC Name
My_Address="" ## Your ETH Address 0x......

pls have a try..

Happy Mining... ^_^

taterbum

newbie

Activity: 5

Merit: 0

Hi Overcool,

This is exactly what I'm looking for as a Windows guy looking to shed Win10 and get into Linux. I applogies in advance for the stupid questions Wink

My main issue right now is I'm getting:

Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon
Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon
Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon
Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon

It doesn't seem to matter what I enter in the fields below, I get invalid argument. I even used my pools donate wallet address and got the same bang.
My_Rig=""
My_Address=""

Any help would rock Cheesy

Thanks a million,

Tate

themacks

newbie

Activity: 4

Merit: 0

Hi OverCool

I really like the simplicity of XMOS. It worked straight away - no fuss.

Any chance you're working on duplicating an XMOS for Z/ZenCash ?

overcool

newbie

Activity: 63

Merit: 0

Quote from: ?? on ??

Will this work with Nvidia and AMD mixed RIG . Also Nvidia OC will work with p106-100 Cards ?? .

Thanks

Hi, it was not recommend to use on mix GPU, but can try.

I have new version that support P106, but not public yet..

Happy Mining...

overcool

newbie

Activity: 63

Merit: 0

Quote from: kentan on November 30, 2017, 09:44:12 PM

Hi overcool,

Thanks for all your hard work on this. Just gave it a test run. It seems to have problems connecting to asia1.ethermine.org. Unable to resolve hostname . It connects and then says disconnected. Not too sure whether it is ethermine pool, ethminer or a problem with ubuntu dns or networking itself. Its only by luck that after several tries, it connects. It also failover to the us1/2 servers sometimes so the connection seems kinda unstable.

Also some of my 1060 cards are giving low hashrates of around 17/18Mh/s whilst others are at 22Mh/s. I tried bumping up the mem overclock but the max I get is around 19. Is it a gpu issue?

Anything I can tweak in the settings which can help? Many thanks !

Hi Kentan,

I also mining on asia1.ethermine.org also, i dont have any network issue.

For OC setting each card is different, having to slowly find out the optimal setting.

If u are running on mix GPU, u can try OC options "3" . ALl GPU using different OC setting.

Happy Mining...

^_^

overcool

newbie

Activity: 63

Merit: 0

Quote from: fruitmint on December 02, 2017, 03:54:04 PM

Hi

Great distro..
I mining about 2 months without any issues after i found correct oc levels. So easy mining

Now i would like to go ETH+DCR, just cannot figure out how... so it start dual mine after bootup.
Another issue with ETH+DCR when i killall mining prosesses and manually start ETH+DCR, all dcr shares rejected.
Any idea where to look for that rejecting?

tq for good work

TQ very give me a try...
Dual Mining still not inside in my work scope yet...
I will update on main page if XMOS support dual mining..

fruitmint

newbie

Activity: 1

Merit: 0

Hi

Great distro..
I mining about 2 months without any issues after i found correct oc levels. So easy mining

Now i would like to go ETH+DCR, just cannot figure out how... so it start dual mine after bootup.
Another issue with ETH+DCR when i killall mining prosesses and manually start ETH+DCR, all dcr shares rejected.
Any idea where to look for that rejecting?

tq for good work

kentan

newbie

Activity: 3

Merit: 0

Hi overcool,

Thanks for all your hard work on this. Just gave it a test run. It seems to have problems connecting to asia1.ethermine.org. Unable to resolve hostname . It connects and then says disconnected. Not too sure whether it is ethermine pool, ethminer or a problem with ubuntu dns or networking itself. Its only by luck that after several tries, it connects. It also failover to the us1/2 servers sometimes so the connection seems kinda unstable.

Also some of my 1060 cards are giving low hashrates of around 17/18Mh/s whilst others are at 22Mh/s. I tried bumping up the mem overclock but the max I get is around 19. Is it a gpu issue?

Anything I can tweak in the settings which can help? Many thanks !

overcool

newbie

Activity: 63

Merit: 0

Quote from: Kompik on November 20, 2017, 04:16:32 PM

I got it working, but only getting 27 with 1070 after overclocking, that seems really slow compared to what i get in windows 31MH+ Sad

. Is that normal?

For 1070 try to overclock your memory to 4400MHz.

Here ex:-
NV_WATT="105"
NV_CLOCK="-100"
NV_MEM="1200"
NV_FAN="88"

Then you will see the gstatus output:-
name, power.draw [W], fan.speed [%], temperature.gpu, clocks.current.video [MHz], clocks.current.memory [MHz]
GeForce GTX 1070, 105.54 W, 88 %, 52, 1341 MHz, 4404 MHz
GeForce GTX 1070, 105.86 W, 88 %, 53, 1354 MHz, 4404 MHz

Happy Mining... ^_^

Kompik

sr. member

Activity: 463

Merit: 250

I got it working, but only getting 27 with 1070 after overclocking, that seems really slow compared to what i get in windows 31MH+ Sad

. Is that normal?

overcool

newbie

Activity: 63

Merit: 0

Quote from: exciter.0 on October 20, 2017, 08:06:53 PM

Very nice distro, saves a lot of time from having to do my own headless install.

My issue is that for some reason, it detects 4 GPUs but only 3 are mining...any idea?

Code:

#10.2.92.186 [33.52Mh/s] [/home/prospector ]# glist
GPU 0: Quadro M6000 (UUID: GPU-9afd3026-18b6-974d-7469-5ecec5168e6a)
GPU 1: GeForce GTX 970 (UUID: GPU-faecce86-6f48-4fea-db8c-be1d7ebd034a)
GPU 2: GeForce GTX 980 (UUID: GPU-81c29d17-20db-9eaf-a7d9-f1384de47a0f)
GPU 3: GeForce GTX 980 (UUID: GPU-0608d3f8-77c1-ff0e-e3bf-b21239aa65f3)
#10.2.92.186 [33.52Mh/s] [/home/prospector ]# gstatus
CPU TEMP:- 36
System Uptime:- 29 minutes
Nvidia_GPU:-3 AMD_GPU:-0
GPUS Installed:- 4 Pcs
name, power.draw [W], fan.speed [%], temperature.gpu, clocks.current.video [MHz], clocks.current.memory [MHz]
Quadro M6000, 141.73 W, 90 %, 57, 1059 MHz, 3304 MHz
GeForce GTX 970, 133.44 W, 90 %, 44, 1231 MHz, 3004 MHz
GeForce GTX 980, 127.88 W, 90 %, 42, 1254 MHz, 3004 MHz
GeForce GTX 980, 49.78 W, 90 %, 36, 1036 MHz, 3758 MHz

#10.2.92.186 [33.28Mh/s] [/home/prospector ]# cat runlog/totalgpus.txt
TOTALGPUS=4
NGPU=4
AGPU=0
CUDAGPU=3
OPENCLGPU=0
MININGGPU=3

Have you find out which GPU is not mining..?

if try out this command if all the Nvidia GPU:-
~/ethereum-mining/ethminer/build/ethminer/ethminer -U --list-devices

Happy Mining .. ^_^

exciter.0

newbie

Activity: 10

Merit: 0

Very nice distro, saves a lot of time from having to do my own headless install.

My issue is that for some reason, it detects 4 GPUs but only 3 are mining...any idea?

Code:

#10.2.92.186 [33.52Mh/s] [/home/prospector ]# glist
GPU 0: Quadro M6000 (UUID: GPU-9afd3026-18b6-974d-7469-5ecec5168e6a)
GPU 1: GeForce GTX 970 (UUID: GPU-faecce86-6f48-4fea-db8c-be1d7ebd034a)
GPU 2: GeForce GTX 980 (UUID: GPU-81c29d17-20db-9eaf-a7d9-f1384de47a0f)
GPU 3: GeForce GTX 980 (UUID: GPU-0608d3f8-77c1-ff0e-e3bf-b21239aa65f3)
#10.2.92.186 [33.52Mh/s] [/home/prospector ]# gstatus
CPU TEMP:- 36
System Uptime:- 29 minutes
Nvidia_GPU:-3 AMD_GPU:-0
GPUS Installed:- 4 Pcs
name, power.draw [W], fan.speed [%], temperature.gpu, clocks.current.video [MHz], clocks.current.memory [MHz]
Quadro M6000, 141.73 W, 90 %, 57, 1059 MHz, 3304 MHz
GeForce GTX 970, 133.44 W, 90 %, 44, 1231 MHz, 3004 MHz
GeForce GTX 980, 127.88 W, 90 %, 42, 1254 MHz, 3004 MHz
GeForce GTX 980, 49.78 W, 90 %, 36, 1036 MHz, 3758 MHz

#10.2.92.186 [33.28Mh/s] [/home/prospector ]# cat runlog/totalgpus.txt
TOTALGPUS=4
NGPU=4
AGPU=0
CUDAGPU=3
OPENCLGPU=0
MININGGPU=3

razor_amd

newbie

Activity: 7

Merit: 0

Can someone help us where and what to write to use coinotron pool with this miner?
We also don't need wallet address in the xmosconf, do we just erase it or what?

Thank you very much for info!

https://screenshots.firefoxusercontent.com/images/ca913ef2-ece6-482d-9352-24c72fb76a43.png

OverEasy

sr. member

Activity: 301

Merit: 251

Ok thanks. Something very wrong with this build.

Good luck fixing it.

My time is done with it.

overcool

newbie

Activity: 63

Merit: 0

Quote from: OverEasy on October 14, 2017, 03:30:09 PM

Quote from: overcool on October 14, 2017, 12:38:27 PM

Quote from: OverEasy on October 13, 2017, 02:40:24 PM

Wanted to add that if I simply type ethminer -G -F http://eth-us.dwarfpool.com:80/0xmyaddress/Rig4 at the prompt it mines just fine.
I just dont have the OC

Hi

My setting is like this:-
maybe you can have try

STRATUMPROXY="enable"

POOL1="eth-sg.dwarfpool.com:8008"
POOL2="eth-us.dwarfpool.com:8008"
POOL3="eth-eu.dwarfpool.com:8008"
POOL4="eth-hk.dwarfpool.com:8008"

Happy Mining ... ^_^

Tried it.
Same error. Cant connect to proxy

^_^ Really cant help you any more...

OverEasy

sr. member

Activity: 301

Merit: 251

Quote from: overcool on October 14, 2017, 12:38:27 PM

Quote from: OverEasy on October 13, 2017, 02:40:24 PM

Wanted to add that if I simply type ethminer -G -F http://eth-us.dwarfpool.com:80/0xmyaddress/Rig4 at the prompt it mines just fine.
I just dont have the OC

Hi

My setting is like this:-
maybe you can have try

STRATUMPROXY="enable"

POOL1="eth-sg.dwarfpool.com:8008"
POOL2="eth-us.dwarfpool.com:8008"
POOL3="eth-eu.dwarfpool.com:8008"
POOL4="eth-hk.dwarfpool.com:8008"

Happy Mining ... ^_^

Tried it.
Same error. Cant connect to proxy

Topic: XMOS - Light Weight Linux Base ETH Mining OS - Optimal for Nvidia GPU V2.0 - page 2. (Read 21582 times)