XMOS - Light Weight Linux Base ETH Mining OS - Optimal for Nvidia GPU V2.0 - page 3.

overcool

newbie

Activity: 63

Merit: 0

Quote from: OverEasy on October 13, 2017, 02:40:24 PM

Wanted to add that if I simply type ethminer -G -F http://eth-us.dwarfpool.com:80/0xmyaddress/Rig4 at the prompt it mines just fine.
I just dont have the OC

Hi

My setting is like this:-
maybe you can have try

STRATUMPROXY="enable"

POOL1="eth-sg.dwarfpool.com:8008"
POOL2="eth-us.dwarfpool.com:8008"
POOL3="eth-eu.dwarfpool.com:8008"
POOL4="eth-hk.dwarfpool.com:8008"

Happy Mining ... ^_^

OverEasy

sr. member

Activity: 301

Merit: 251

Wanted to add that if I simply type ethminer -G -F http://eth-us.dwarfpool.com:80/0xmyaddress/Rig4 at the prompt it mines just fine.
I just dont have the OC

OverEasy

sr. member

Activity: 301

Merit: 251

Ok I built another USB drive and started over.
This cannot be done.
Please show me your WORKING setup file
and your WORKING startmine.sh file

I have tried every conceivable combination of addresses and commands.

When I use stratum enabled this is my error -

overcool

newbie

Activity: 63

Merit: 0

Quote from: OverEasy on October 13, 2017, 11:02:39 AM

I need to stop now. Lost a lot of hashing time on this.
As it is today this build will not mine on Dwarfpool
You have "." instead of "/"
You have typo for $My_Rig
And from what I can see the entire sections for enable and disable are backwards for Dwarfpool.
And something is very wrong concerning the proper switches for Dwarfpool (-F -G works on 8 rigs but not this build)

I suggest modifying this script further to accommodate multiple pools instead of just one.

I'm sure you can work it out or I might try later to change it.

In the meanwhile its back to Windows for me.

Good luck

Hi OverEasy,

TQ for the recommendation, I will have a look on it.

By the way, Here the screen capture that I using XMOS V2.0 Mining on Dwarfpool using "Stratum Proxy v0.0.5 by dwarfpool" setting STRATUMPROXY="enable".
Just to share out.

https://imgur.com/a/pHutg

Happy Mining...

OverEasy

sr. member

Activity: 301

Merit: 251

I need to stop now. Lost a lot of hashing time on this.
As it is today this build will not mine on Dwarfpool
You have "." instead of "/"
You have typo for $My_Rig
And from what I can see the entire sections for enable and disable are backwards for Dwarfpool.
And something is very wrong concerning the proper switches for Dwarfpool (-F -G works on 8 rigs but not this build)

I suggest modifying this script further to accommodate multiple pools instead of just one.

I'm sure you can work it out or I might try later to change it.

In the meanwhile its back to Windows for me.

Good luck

OverEasy

sr. member

Activity: 301

Merit: 251

No 8080 is wrong unless I want that proxy thing.

I thing I found the problem in startmine.sh -

I also found a typo.

Let me test my changes and I will report

BTW I have 7 other miners all on Ethminer / Windows.

overcool

newbie

Activity: 63

Merit: 0

Quote from: OverEasy on October 13, 2017, 10:09:38 AM

Doesnt it need the -F -G command?

A little closer now

https://s1.postimg.org/5mj539z4wv/xmos_connect.jpg

-F options is slow.

pls set ur Pool address collectly.

Example for Dwrafpool:-
POOL1="eth-eu.dwarfpool.com:8008"
POOL2="eth-us.dwarfpool.com:8008"

You can have look on here:-
https://dwarfpool.com/eth

OverEasy

sr. member

Activity: 301

Merit: 251

Doesnt it need the -F -G command?

NVm just tried adding -F -G and same error as below.

A little closer now

overcool

newbie

Activity: 63

Merit: 0

Quote from: OverEasy on October 13, 2017, 09:50:25 AM

I'm sure I am doing something retarded but here it is -

https://s1.postimg.org/4hb1lwxyu7/xmos_config.jpg

https://s1.postimg.org/4egygj7ekv/xmos_results.jpg

STRATUMPROXY="disable"
if dwarfpool STRATUMPROXY is enable, pls take out the -RH options.

pls try to disable the dwarfpool STRATUMPROXY, ethminer got build-in stratum proxy as well, it work great also..

just 3 step:-

Put in ur wallet address
put in ur pool address
save and restart.

If still cannot, maybe you need to re-image the pen-drive.

Happy Mining.. ^_^

OverEasy

sr. member

Activity: 301

Merit: 251

I'm sure I am doing something retarded but here it is -

OverEasy

sr. member

Activity: 301

Merit: 251

Quote from: overcool on October 13, 2017, 08:28:33 AM

Quote from: OverEasy on October 13, 2017, 08:00:25 AM

Nope don't get it.
Can't mine on Dwarfpool.
How to use Dwarfpool?

I have only 1 pool not 4.

http://eth-us.dwarfpool.com:80
http://eth-us2.dwarfpool.com:80 (failover)

Where do I put these> pool 1 and 2 or pool 3 and 4

Stratum enabled or disabled?

Just not happening. Back to Windows again...sigh

Just put pool1 and pool2 and stratum proxy disable. Save and reboot, it should working fine,
If you really want to try up the stratum proxy, just repeats put pool1 address to pool3 and pool2 to pool4, stratum enable, save and restart it should work.

That's exactly what I did. Lots of errors and no mining. I'll try again later and get some screenshots for you.
Thanks

car1999

full member

Activity: 350

Merit: 100

looks great, I'll try it.

overcool

newbie

Activity: 63

Merit: 0

Quote from: OverEasy on October 13, 2017, 08:00:25 AM

Nope don't get it.
Can't mine on Dwarfpool.
How to use Dwarfpool?

I have only 1 pool not 4.

http://eth-us.dwarfpool.com:80
http://eth-us2.dwarfpool.com:80 (failover)

Where do I put these> pool 1 and 2 or pool 3 and 4

Stratum enabled or disabled?

Just not happening. Back to Windows again...sigh

Just put pool1 and pool2 and stratum proxy disable. Save and reboot, it should working fine,
If you really want to try up the stratum proxy, just repeats put pool1 address to pool3 and pool2 to pool4, stratum enable, save and restart it should work.

OverEasy

sr. member

Activity: 301

Merit: 251

Nope don't get it.
Can't mine on Dwarfpool.
How to use Dwarfpool?

I have only 1 pool not 4.

http://eth-us.dwarfpool.com:80
http://eth-us2.dwarfpool.com:80 (failover)

Where do I put these> pool 1 and 2 or pool 3 and 4

Stratum enabled or disabled?

Just not happening. Back to Windows again...sigh

OverEasy

sr. member

Activity: 301

Merit: 251

well i'm closer now.
set it up but miner went to asia ethermine instead of my address dwarfpool.
Re-checking all

OverEasy

sr. member

Activity: 301

Merit: 251

Obviously I'm a Windows guy lol....Forgot Nano not as user friendly as notepad.

I will try again

Thank you

overcool

newbie

Activity: 63

Merit: 0

Quote from: OverEasy on October 13, 2017, 06:55:23 AM

Am i blind???
There is no pool1 and pool2 fields to enter anything into

Hi OverEasy,

Use arrow key go down a bit then you can see it... Or using Pg up or Pg down key...

^_^

OverEasy

sr. member

Activity: 301

Merit: 251

Am i blind???
There is no pool1 and pool2 fields to enter anything into

overcool

newbie

Activity: 63

Merit: 0

Quote from: OverEasy on October 13, 2017, 05:36:00 AM

Wifi is working.

I do not understand how to use this build.

Where do I enter pool info?

The setup command does not have a place for stratums

Please help

How to use and configure XMOS

Simple command to configure XMOS:-
1. At terminal type xmosconf - works
2. put in your ETH wallet address - how? what? do I uncomment the # MY_ADDRESS : Your public ethereum address
so it looks like this - MY_ADDRESS : 0xsomelongaddresshere
or do I do this - MY_ADDRESS= 0xsomelongaddresshere

3. put in your Pool address on Pool1 and Pool2. (STRATUM Mode) - These DO NOT EXIST.

https://s1.postimg.org/6gedlmdj33/xmos.jpg

Hi OverEasy,

Just put in ur ETH wallet address to the MY_ADDRESS, Primary Pool address to pool1, and backup pool address to pool 2, that all, restart the system it should work...

OverEasy

sr. member

Activity: 301

Merit: 251

Going back to Windows until I get more info..

Topic: XMOS - Light Weight Linux Base ETH Mining OS - Optimal for Nvidia GPU V2.0 - page 3. (Read 21594 times)