Perhaps he was referring to a bug in the cryptonote code that was found by Monero devs. That would allow to create coins out of thin hair. Bytecoin was the one affected by this bug and eventually your friend might be thinking it was Monero.
https://shellcode.se/hacking/bytecoin_exploited/
Topic: [XMR] Monero - A secure, private, untraceable cryptocurrency - page 135. (Read 4671920 times)
October 16, 2018, 08:15:36 PM
October 16, 2018, 01:47:27 PM
Hi,
After updating the new version of the GUI wallet, this issue has occurred. How do I solve it? I see that blocks are increasing, but this message bothers me. Should I worry about something?
Thanks!
After updating the new version of the GUI wallet, this issue has occurred. How do I solve it? I see that blocks are increasing, but this message bothers me. Should I worry about something?
Thanks!
Did you already successfully complete the database migration? In addition, what version numbers are listed on the Settings page (under Debug info)?
I did not do anything about data migration !!! What should I do. Delete the old and start from block 0 again? Version v0.13.0.3 (Qt 5.7.0)
Hold off on that for a second. To be clear, you're using your own (local) node right? Or are you using a remote node?
Thanks for the help dEBRUYNE!
It's all over now. I waited a bit and the messages disappeared! Otherwise, I use a remote node.
October 16, 2018, 01:24:38 PM
Hi,
After updating the new version of the GUI wallet, this issue has occurred. How do I solve it? I see that blocks are increasing, but this message bothers me. Should I worry about something?
Thanks!
After updating the new version of the GUI wallet, this issue has occurred. How do I solve it? I see that blocks are increasing, but this message bothers me. Should I worry about something?
Thanks!
Did you already successfully complete the database migration? In addition, what version numbers are listed on the Settings page (under Debug info)?
I did not do anything about data migration !!! What should I do. Delete the old and start from block 0 again? Version v0.13.0.3 (Qt 5.7.0)
Hold off on that for a second. To be clear, you're using your own (local) node right? Or are you using a remote node?
October 16, 2018, 11:34:52 AM
Hi,
After updating the new version of the GUI wallet, this issue has occurred. How do I solve it? I see that blocks are increasing, but this message bothers me. Should I worry about something?
Thanks!
After updating the new version of the GUI wallet, this issue has occurred. How do I solve it? I see that blocks are increasing, but this message bothers me. Should I worry about something?
Thanks!
Did you already successfully complete the database migration? In addition, what version numbers are listed on the Settings page (under Debug info)?
I did not do anything about data migration !!! What should I do. Delete the old and start from block 0 again? Version v0.13.0.3 (Qt 5.7.0)
October 16, 2018, 11:29:41 AM
Hi,
After updating the new version of the GUI wallet, this issue has occurred. How do I solve it? I see that blocks are increasing, but this message bothers me. Should I worry about something?
Thanks!
After updating the new version of the GUI wallet, this issue has occurred. How do I solve it? I see that blocks are increasing, but this message bothers me. Should I worry about something?
Thanks!
Did you already successfully complete the database migration? In addition, what version numbers are listed on the Settings page (under Debug info)?
October 16, 2018, 11:18:37 AM
Hi,
After updating the new version of the GUI wallet, this issue has occurred. How do I solve it? I see that blocks are increasing, but this message bothers me. Should I worry about something?
Thanks!
After updating the new version of the GUI wallet, this issue has occurred. How do I solve it? I see that blocks are increasing, but this message bothers me. Should I worry about something?
Thanks!
October 16, 2018, 02:45:58 AM
When I try to make a transaction with Ledger GUI wallet I have the following error message:
unexpected error: Fail SCard API : (-2146435042) 0x8010001E Device=0, hCard=16861477009170104320, hContext=14771806782070194176
What does that mean?
unexpected error: Fail SCard API : (-2146435042) 0x8010001E Device=0, hCard=16861477009170104320, hContext=14771806782070194176
What does that mean?
Which operating system are you using and which version of the CLI (or GUI)?
Have you tried using a different USB cable and/or USB port? Your cable might not be working properly anymore, which inhibits the GUI from functioning properly (in conjunction with a Ledger device).
With a second USB cable I have something new though, I have an other error message
unexpected error: Fail SCard API : (-2146435025) 0x8010002F Device=0, hCard=16861477009170104320, hContext=14771806816429932544
And on the Ledger, it's dispayed "Fee 0.00838096" then when I go down it is displayed "Reject fee", then when I go down again it is displayed "Accept fee", but I cannot really choose to accept or reject the fee, I don't have the option to validate. Anyway there is the above error message on the GUI.
Could you perhaps try the new release?
GUI v0.13.0.3 'Beryllium Bullet' released!
https://www.reddit.com/r/Monero/comments/9ol2ic/gui_v01303_beryllium_bullet_released/
This is the GUI v0.13.0.3 'Beryllium Bullet' point release, which a user should run to be sufficiently prepared for the scheduled protocol upgrade of October 18 (for which more information can be found here).
https://www.reddit.com/r/Monero/comments/9ol2ic/gui_v01303_beryllium_bullet_released/
This is the GUI v0.13.0.3 'Beryllium Bullet' point release, which a user should run to be sufficiently prepared for the scheduled protocol upgrade of October 18 (for which more information can be found here).
October 16, 2018, 02:45:15 AM
Since the last upgrade to beryllium my node doesn't accept my Monerujo client anymore.
Everytime i try to connect i get the error message "Node unavailable. Please check User/Password"
Node is up an running
Any of you guys having the same issues
Everytime i try to connect i get the error message "Node unavailable. Please check User/Password"
Node is up an running
Any of you guys having the same issues
Are you running the latest version of both monerod and monerujo?
October 16, 2018, 02:38:13 AM
GUI v0.13.0.3 'Beryllium Bullet' released!
https://www.reddit.com/r/Monero/comments/9ol2ic/gui_v01303_beryllium_bullet_released/
This is the GUI v0.13.0.3 'Beryllium Bullet' point release, which a user should run to be sufficiently prepared for the scheduled protocol upgrade of October 18 (for which more information can be found here).
https://www.reddit.com/r/Monero/comments/9ol2ic/gui_v01303_beryllium_bullet_released/
This is the GUI v0.13.0.3 'Beryllium Bullet' point release, which a user should run to be sufficiently prepared for the scheduled protocol upgrade of October 18 (for which more information can be found here).
October 16, 2018, 12:01:29 AM
Since the last upgrade to beryllium my node doesn't accept my Monerujo client anymore.
Everytime i try to connect i get the error message "Node unavailable. Please check User/Password"
Node is up an running
Any of you guys having the same issues
Everytime i try to connect i get the error message "Node unavailable. Please check User/Password"
Node is up an running
Any of you guys having the same issues
October 15, 2018, 09:11:16 PM
Monero was down almost throughout last week but the community is confident that the price action will change this week. This is because the developer community is making plans to release updates that will implement Bulletproofs and make the Monero platform ASIC mining resistant.
purpose of implementing bulletproofs? heard that bulletproofs privacy is being tested on bitcoin? If Monero is already a privacy coin, why need to implement bulletproofs? dumb question but whats ASIC mining resistant means?
Due to Monero privacy the transactions are much larger than Bitcoin - bullet proofs will reduce the tx size significantly. ASIC resistant basically means hard forking every six months and tweaking the PoW.
October 15, 2018, 08:36:40 PM
Monero was down almost throughout last week but the community is confident that the price action will change this week. This is because the developer community is making plans to release updates that will implement Bulletproofs and make the Monero platform ASIC mining resistant.
purpose of implementing bulletproofs? heard that bulletproofs privacy is being tested on bitcoin? If Monero is already a privacy coin, why need to implement bulletproofs? dumb question but whats ASIC mining resistant means?
October 15, 2018, 02:16:21 PM
When I try to make a transaction with Ledger GUI wallet I have the following error message:
unexpected error: Fail SCard API : (-2146435042) 0x8010001E Device=0, hCard=16861477009170104320, hContext=14771806782070194176
What does that mean?
unexpected error: Fail SCard API : (-2146435042) 0x8010001E Device=0, hCard=16861477009170104320, hContext=14771806782070194176
What does that mean?
Which operating system are you using and which version of the CLI (or GUI)?
Have you tried using a different USB cable and/or USB port? Your cable might not be working properly anymore, which inhibits the GUI from functioning properly (in conjunction with a Ledger device).
With a second USB cable I have something new though, I have an other error message
unexpected error: Fail SCard API : (-2146435025) 0x8010002F Device=0, hCard=16861477009170104320, hContext=14771806816429932544
And on the Ledger, it's dispayed "Fee 0.00838096" then when I go down it is displayed "Reject fee", then when I go down again it is displayed "Accept fee", but I cannot really choose to accept or reject the fee, I don't have the option to validate. Anyway there is the above error message on the GUI.
October 15, 2018, 11:14:15 AM
I've been running a full node and switched over to 13.0.2 CLI. It immediately had trouble synching . I keep getting notified about "Error adding block" and "Attempting to add transaction that's already in the db". If I go back to 12.3.0 the daemon tells me to "Please delete the existing database and resync." Do I have to spend a week re-synching this thing from scratch?
Did your system shut down unexpectedly whilst the daemon was upgrading the database version? Or shortly thereafter? Because those error messages kind of insinuate your blockchain is corrupt. A blockchain resync from scratch, even though tedious, is probably the easiest way to resolve your issue.
October 15, 2018, 09:47:59 AM
Extra extra, read all about it!
The Monero Moon (Issue 6) is hot off the printing press and there's no doubt about it!
https://medium.com/@johnfoss/the-monero-moon-issue-6-2c2e7d0dccb4
The Monero Moon (Issue 6) is hot off the printing press and there's no doubt about it!
https://medium.com/@johnfoss/the-monero-moon-issue-6-2c2e7d0dccb4
October 15, 2018, 04:39:43 AM
October 15, 2018, 12:41:09 AM
I've been running a full node and switched over to 13.0.2 CLI. It immediately had trouble synching . I keep getting notified about "Error adding block" and "Attempting to add transaction that's already in the db". If I go back to 12.3.0 the daemon tells me to "Please delete the existing database and resync." Do I have to spend a week re-synching this thing from scratch?
October 14, 2018, 12:05:54 PM
Meanwile diff grows to 80, so sad((
Yup, stronger security is always sad...WTF
October 14, 2018, 11:54:51 AM
Meanwile diff grows to 80, so sad((
October 14, 2018, 06:22:49 AM
When I try to make a transaction with Ledger GUI wallet I have the following error message:
unexpected error: Fail SCard API : (-2146435042) 0x8010001E Device=0, hCard=16861477009170104320, hContext=14771806782070194176
What does that mean?
unexpected error: Fail SCard API : (-2146435042) 0x8010001E Device=0, hCard=16861477009170104320, hContext=14771806782070194176
What does that mean?
Which operating system are you using and which version of the CLI (or GUI)?
Have you tried using a different USB cable and/or USB port? Your cable might not be working properly anymore, which inhibits the GUI from functioning properly (in conjunction with a Ledger device).
Jump to: