Topic: Z9 list of working pools/Fork updates - page 12. (Read 36863 times)

It's in the first post and has come up several times: like the A3 and X3, the Z9 is not supported by Nicehash.

No.

is there any way to mining on nicehash?
any setting or something?
getting lot of reject share?!!!

I'm not surprised they didn't want to help you after you basically called them idiots suggesting the Z9 shouldn't be listed as supported. Are you seriously suggesting that despite the other dozens if not hundreds of Z9s that are functioning properly on the pool, you still believe that the problem isn't on your side?

Trying to get Hush & Zec working on 2miners with the z9, high diff ports are OBVIOUSLY too high diff, was getting like 1.2 shares per minute with half being rejected. Trying the lower diff ports now, seems to work better.

Convo with support staff via telegram didn't help. They claim since it is overclocked that is why i'm having issues. Not sure if I trust them, they seem a bit triggered / salty as you can read below towards the end:

PhAlAnX cOiN, [22.07.18 15:18]
trying to use z9 with 2miners hush pool and getting lots of rejections

B, [22.07.18 15:23]
[In reply to PhAlAnX cOiN]
which difficulty port are you using?

B, [22.07.18 15:23]
high diff is better

PhAlAnX cOiN, [22.07.18 15:23]
i'm using the higher one, i'll switch to it now

B, [22.07.18 15:24]
okay, we've spent a lot of time testing it, should be fine

PhAlAnX cOiN, [22.07.18 15:27]
restarting z9 so i can watch shares directly with 2miners on default pool brb

B, [22.07.18 15:27]
okay

PhAlAnX cOiN, [22.07.18 15:32]
last share 2 minutes ago... but miner says just a few seconds

B, [22.07.18 15:32]
is it a rejected one?

B, [22.07.18 15:33]
could you please check if you got the same issue at the zec.2miners.com pool?

PhAlAnX cOiN, [22.07.18 15:33]
after 3 min uptime i have 3 accepted and 2 rejected

PhAlAnX cOiN, [22.07.18 15:34]
yeah i can restart z9 with that info in there brb

B, [22.07.18 15:34]
is your ASIC overclocked?

B, [22.07.18 15:34]
maybe too much?

PhAlAnX cOiN, [22.07.18 15:37]
it is overclocked but not getting hardware errors and works great at all other pools

B, [22.07.18 15:37]
or other pools are receiving the wrong shares...

PhAlAnX cOiN, [22.07.18 15:37]
getting paid nonetheless appropriately

B, [22.07.18 15:38]
yeah

PhAlAnX cOiN, [22.07.18 15:38]
k 1st share rej on zec 2miners

B, [22.07.18 15:39]
ok, let it work for 10 mins and let us know

PhAlAnX cOiN, [22.07.18 15:39]
ok

PhAlAnX cOiN, [22.07.18 15:47]
getting 1.23 shares per minute diff is clearly waay too high

PhAlAnX cOiN, [22.07.18 15:48]
how should i adjust difficulty? password field? should i use same port?

B, [22.07.18 15:50]
it is not possible to adjust the difficulty

PhAlAnX cOiN, [22.07.18 15:50]
😔

B, [22.07.18 15:50]
you could just select the high diff / low diff port

PhAlAnX cOiN, [22.07.18 15:51]
i'll try the low diff port and see what happens

B, [22.07.18 15:51]
okay

PhAlAnX cOiN, [22.07.18 15:51]
may want to update the website to let people know z9 isn't fully supported

B, [22.07.18 15:52]
Z9 is fully supported

PhAlAnX cOiN, [22.07.18 15:52]
maybe i have different z9 than everyone else?

DuDlik, [22.07.18 15:53]
[In reply to PhAlAnX cOiN]
Use other pools. Why you spend time here?

B, [22.07.18 15:54]
[In reply to PhAlAnX cOiN]
Your one is overclocked to much. That's it. If other pool will pay you for the invalid shares - use them of course

PhAlAnX cOiN, [22.07.18 15:54]
because thought z9 works here, apparently it doesn't. you guys are best alternative for hush, i'll try tweaking it but may have to use other pool

DuDlik, [22.07.18 15:55]
Ok use another pools pls. Stop flud

PhAlAnX cOiN, [22.07.18 15:55]
wow angry much? dude just trying to get this to work chill out

DuDlik, [22.07.18 15:59]
You have overclocked asic
We have tested pools with z9
But you discuss 1 hour about “pool is not correct”
And you have idea about another pools - works greater.
Use this pools and don’t trash our time pls

PhAlAnX cOiN, [22.07.18 16:00]
wow 1 hour? started this convo with out at 3:23pm, it is now 4:00

No isues mining zen on suprnova.  Been on there the last 3 days.  No restarts or anything, rejection rate is insignificant for me.

Question- when using Suprnova pools with Z9 looks like pool suggests to use ccminer port. What to do if ccminer port not available for the particular pool (such as in Hush's case on suprnova)? Is the only difference the difficulty? Should I just simply set a particular diff in password field? If so what have y'all seen that works well? Thanks!

Which pool ?
Mining Zen on Luxor with ten Z9 and an average 0.2% of rejected shares.

Have you also Problems mining ZEN after the fork? Much Reject shares and no rewards on mph on auto switch.

Same for me. I compared with 2 Z9 running side by side and ZEC on Flypool was making $2-4 more a day vs MPH Equihash auto-switching (and auto exchange of ZEN and ZCL to ETH, not exchanging ZEC). Both OCed at 700.

As an update, was finally able to contact them via their discord. Apparently mine is an isolated problem that nobody knows how to fix (or what caused it) so they sent me the BCI that is still in the pool; as such, I moved them back to the working list as nobody else in the chat had heard of it happening before.

Explain how not finding a block makes one a crook please.

Don't even try slush pool, they are real crooks, for 10 hours not a single block

you are crooks

Yup it's worked for me but I'm not sure it maximizes profits.  Not very scientific but straight ZEC mining resulted in higher earnings than auto-switching with them.

Yes, I am using the equihash autoswitch and auto-exchange to BTC w/o issues for the past 2 weeks.

What coin and pool are you mining at to receive that? hashrate and O/C?

I've mined ZEN off Z.hashpro AND Suprnova and returns are about 1.06 ZEN per day. running at an avg 16k, 737 O/C.

ZEC off flypool is about .12 with same sols and o/C.

Algo switch working on MPH?

I clear $30 / day with my z9. That is in BTC

Anybody here that has any deeper knowing or has tested different custom difficultys on Suprnova??? Im getting decent resullts but figure a firm custom difficulty must be better then the floating auto with big variances?? 

//JJ