Updated and added confirmed fork info to the main post. Please feel free to add links to any announcements to this thread as well and I will update the main as best as I can.
I believe someone said Zec is working on Supernova but it’s not listed on the first post. 
Topic: Z9 list of working pools/Fork updates - page 36. (Read 36863 times)
this is a nice list, thanks for compiling OP
It's sad to know that Bittman cheated on me. I also ordered a Z9 in the first batch, but it hasn't come yet. I just got a text today ABOUT the cost of customs clearance from DHL. By the time I get my Z9 network complexity will increase and it will not return costs. I will never buy asics again.
What are you talking about?
You ordered a product from a shop with delivery between 20-30 june. They ship based on FIFO.
Today its 23.june and you miner has shipped.
Exactly how did Bitmain cheat on you?
It's sad to know that Bittman cheated on me. I also ordered a Z9 in the first batch, but it hasn't come yet. I just got a text today ABOUT the cost of customs clearance from DHL. By the time I get my Z9 network complexity will increase and it will not return costs. I will never buy asics again.
Updated and added confirmed fork info to the main post. Please feel free to add links to any announcements to this thread as well and I will update the main as best as I can.
Powermining now have Equihash stratums optimized for Z9 and A9 Miners.
https://bitcointalksearch.org/topic/m.39265133
Updated! Since you work for the pool, I did add it to working but made a note that it wasn't an independent review. I actually plan to take mine off BTG later today, so I can test it if nobody else does...
Great if you could do a test :-)
Working on adding ZCL now.
Hello guys,
Need some help. How exactly do i configure my Z9 to mine BTG on mining pool hub?
i seem to be getting about 2/3 discarded and 1/3 accepted
thank you!
Need some help. How exactly do i configure my Z9 to mine BTG on mining pool hub?
i seem to be getting about 2/3 discarded and 1/3 accepted
thank you!
That's normal. Keep an eye on your hashrate on the pool and you're fine.
Discarded is not the same as rejected.
Thank you!
Updated and added confirmed fork info to the main post. Please feel free to add links to any announcements to this thread as well and I will update the main as best as I can.
Powermining now have Equihash stratums optimized for Z9 and A9 Miners.
https://bitcointalksearch.org/topic/m.39265133
Updated! Since you work for the pool, I did add it to working but made a note that it wasn't an independent review. I actually plan to take mine off BTG later today, so I can test it if nobody else does...
Updated and added confirmed fork info to the main post. Please feel free to add links to any announcements to this thread as well and I will update the main as best as I can.
Powermining now have Equihash stratums optimized for Z9 and A9 Miners.
https://bitcointalksearch.org/topic/m.39265133
Hello guys,
Need some help. How exactly do i configure my Z9 to mine BTG on mining pool hub?
i seem to be getting about 2/3 discarded and 1/3 accepted
thank you!
Need some help. How exactly do i configure my Z9 to mine BTG on mining pool hub?
i seem to be getting about 2/3 discarded and 1/3 accepted
thank you!
That's normal. Keep an eye on your hashrate on the pool and you're fine.
Discarded is not the same as rejected.
Hello guys,
Need some help. How exactly do i configure my Z9 to mine BTG on mining pool hub?
i seem to be getting about 2/3 discarded and 1/3 accepted
thank you!
Need some help. How exactly do i configure my Z9 to mine BTG on mining pool hub?
i seem to be getting about 2/3 discarded and 1/3 accepted
thank you!
Updated and added confirmed fork info to the main post. Please feel free to add links to any announcements to this thread as well and I will update the main as best as I can.
Hi everyone, I received my miner today and wanted to add my results thus far.
I had the miner working on the Suprnova Zec pool with no issues and then switched over to MPH mining BTG. I am currently overclocked to frequency of 631 getting 15,360 sol/s and drawing 327 watts at the wall.
Compared to my GPU rig pulling over 1000 and getting a little over 3,000 sol that is extremely impressive. The question now is just how long it will last before becoming an expensive Brick!
Side note, I could not get the Suprnova BTG pool working for whatever reason but the Zec pool worked just fine.
I had the miner working on the Suprnova Zec pool with no issues and then switched over to MPH mining BTG. I am currently overclocked to frequency of 631 getting 15,360 sol/s and drawing 327 watts at the wall.
Compared to my GPU rig pulling over 1000 and getting a little over 3,000 sol that is extremely impressive. The question now is just how long it will last before becoming an expensive Brick!
Side note, I could not get the Suprnova BTG pool working for whatever reason but the Zec pool worked just fine.
Thats good, someone said they were getting 16kh at 380watts, you found a better combination, are you in a cold climate?
16K is about as high as I've been able to push mine with a lot of experimenting, it starts dropping when I push it further. Also it's not consistent pool to pool or even over time, but the pool hashrate is more important anyway, and that stays constant (though, of course, slightly lower).
Hi everyone, I received my miner today and wanted to add my results thus far.
I had the miner working on the Suprnova Zec pool with no issues and then switched over to MPH mining BTG. I am currently overclocked to frequency of 631 getting 15,360 sol/s and drawing 327 watts at the wall.
Compared to my GPU rig pulling over 1000 and getting a little over 3,000 sol that is extremely impressive. The question now is just how long it will last before becoming an expensive Brick!
Side note, I could not get the Suprnova BTG pool working for whatever reason but the Zec pool worked just fine.
I had the miner working on the Suprnova Zec pool with no issues and then switched over to MPH mining BTG. I am currently overclocked to frequency of 631 getting 15,360 sol/s and drawing 327 watts at the wall.
Compared to my GPU rig pulling over 1000 and getting a little over 3,000 sol that is extremely impressive. The question now is just how long it will last before becoming an expensive Brick!
Side note, I could not get the Suprnova BTG pool working for whatever reason but the Zec pool worked just fine.
Thats good, someone said they were getting 16kh at 380watts, you found a better combination, are you in a cold climate?
Hi everyone, I received my miner today and wanted to add my results thus far.
I had the miner working on the Suprnova Zec pool with no issues and then switched over to MPH mining BTG. I am currently overclocked to frequency of 631 getting 15,360 sol/s and drawing 327 watts at the wall.
Compared to my GPU rig pulling over 1000 and getting a little over 3,000 sol that is extremely impressive. The question now is just how long it will last before becoming an expensive Brick!
Side note, I could not get the Suprnova BTG pool working for whatever reason but the Zec pool worked just fine.
I had the miner working on the Suprnova Zec pool with no issues and then switched over to MPH mining BTG. I am currently overclocked to frequency of 631 getting 15,360 sol/s and drawing 327 watts at the wall.
Compared to my GPU rig pulling over 1000 and getting a little over 3,000 sol that is extremely impressive. The question now is just how long it will last before becoming an expensive Brick!
Side note, I could not get the Suprnova BTG pool working for whatever reason but the Zec pool worked just fine.
Got my 1st unit today and it is running happily OC'ed to 656, no HW errors and temps in the low 60's.
Mining BTG on MPH with 0.00% invalids after a couple of hours.
Tried NH, but as others have reported, 50%+ rejects.
Sounds great, What wallet are you using to bank BTCG?..And exchange it for BTC?..Mining BTG on MPH with 0.00% invalids after a couple of hours.
Tried NH, but as others have reported, 50%+ rejects.
Thanks
I use my Trezor (i have the first version, but BTG has been supported for a while now, so any Trezor will work). There are a ton out there that do, though, including Coinomi, which I use on my iPhone for a bunch of my smaller altcoins...
Got my 1st unit today and it is running happily OC'ed to 656, no HW errors and temps in the low 60's.
Mining BTG on MPH with 0.00% invalids after a couple of hours.
Tried NH, but as others have reported, 50%+ rejects.
Sounds great, What wallet are you using to bank BTCG?..And exchange it for BTC?..Mining BTG on MPH with 0.00% invalids after a couple of hours.
Tried NH, but as others have reported, 50%+ rejects.
Thanks
Some good news from Nanopool :
Please note, we have already ordered Z9 recently which is going to be tested as soon as it is received. Meaning Z9 support could be added in the near future.
Kindly stay updated by following us on twitter: @nanopool_org
Please note, we have already ordered Z9 recently which is going to be tested as soon as it is received. Meaning Z9 support could be added in the near future.
Kindly stay updated by following us on twitter: @nanopool_org
Got my 1st unit today and it is running happily OC'ed to 656, no HW errors and temps in the low 60's.
Mining BTG on MPH with 0.00% invalids after a couple of hours.
Tried NH, but as others have reported, 50%+ rejects.
Mining BTG on MPH with 0.00% invalids after a couple of hours.
Tried NH, but as others have reported, 50%+ rejects.
Just tested slushpool with ZEC and 100% rejected.
They want testing done on their debug pool and then notify them after.
dbg.stratum.slushpool.com:4444
They should go to MRR and rent a rig, not ask for charity.
Just tested slushpool with ZEC and 100% rejected.
They want testing done on their debug pool and then notify them after.
dbg.stratum.slushpool.com:4444
Jump to: