I got a different response from NiceHash:
Dear NiceHash user!
We are getting reports from multiple users that they are getting rejected shares on their Z9. Unfortunately, the algorithm protocol in the miner does not match with ours. Bitmain needs to release a firmware update specific for NiceHash.
Please note that there are currently over 100.000 workers connected to Equihash stratum server.
By knowing that, you can conclude that the problem is not with us. There must be something wrong with the Z9 miner, since it’s not compatible with us and unfortunately there is nothing that we can do about it.
We encourage you to contact Bitmain and ask them why the Z9 miner is not working with NiceHash.
Kind regards,
NiceHash Team
Ps.
Here is their update to my ticket:
We hope to resolve the issue with this miner, but we can't do anything on our end at this time. We need to wait for Bitmain to release a firmware update.
Kind regards,
NiceHash Team
Topic: Z9 list of working pools/Fork updates - page 35. (Read 36863 times)
Received the following response from NH this morning regarding Z9 support:
Thank you for posting, let us know if you keep it at 750 and how it responds. Also, I see you are on MPH. For some reason my Z9 is earning on MPH, but it is not registering on the dashboard, graphs, worker page etc. Did you have any similar problems? I have successfully mined using the Equihash switching, BTG, ZEN, ZCL and ZEC. I am generating coins but no record of my miner at all on the pool.
For equihash auto switch, gotta add the workername to the individual equihash coins for it to show. I have the same issue with my GPU rigs.
Are you sure BTG is working on MPH? When I look at the MPH Auto Exchange supported exchanges, it doesn't look like any of them are working with BTG:
Added ZCL, ZEL, BTCP and VOT stratums to Powermining.pw
Equihash Pool Status: https://www.powermining.pw/site/gomining?algo=equihash
Zencash(ZEN):
Zelcash(ZEL):
Zclassic(ZCL):
VoteCoin(VOT):
Bitcoin Private(BTCP):
Example Config:
https://preview.ibb.co/jg9Vzo/z91_miner_config.png
Frontend:
https://preview.ibb.co/hdTOKo/zclassic.png
I`m also one of those that have been running the miner at 750 Mhz now for 24hr. No issues yet, all accepted shares and not a single HW error.
That is a bit of brilliant information, i was wondering how to set up my Z9 its coming this week..would you use Antpool for mining Zcash?...Thanks Equihash Pool Status: https://www.powermining.pw/site/gomining?algo=equihash
Zencash(ZEN):
Code:
URL: stratum+tcp://pool.powermining.pw:2142
Worker: YOUR ZENCASH WALLET ADDRESS
Password: Any password to identify your worker
Zelcash(ZEL):
Code:
URL: stratum+tcp://pool.powermining.pw:2143
Worker: YOUR ZELCASH WALLET ADDRESS
Password: Any password to identify your worker
Zclassic(ZCL):
Code:
URL: stratum+tcp://pool.powermining.pw:2144
Worker: YOUR ZCLASSIC WALLET ADDRESS
Password: Any password to identify your worker
VoteCoin(VOT):
Code:
URL: stratum+tcp://pool.powermining.pw:2145
Worker: YOUR VOTECOIN WALLET ADDRESS
Password: Any password to identify your worker
Bitcoin Private(BTCP):
Code:
URL: stratum+tcp://pool.powermining.pw:2146
Worker: YOUR BTCP WALLET ADDRESS
Password: Any password to identify your worker
Example Config:
https://preview.ibb.co/jg9Vzo/z91_miner_config.png
Frontend:
https://preview.ibb.co/hdTOKo/zclassic.png
I`m also one of those that have been running the miner at 750 Mhz now for 24hr. No issues yet, all accepted shares and not a single HW error.
Antpool should work fine for Zcash, but there are other pools in first post who have ZEC also thats confirmed to work.
copper member
Activity: 94
Merit: 12
BTC mining: Slush Pool, Stratum V2 & Braiins OS+
Hello, just wanna let you know that we have gathered the necessary data for Z9 and we are working on a fix. Thank you for your assistance!
We would still appreciate your help with Innosilicon A9 ZMaster tho.
We would still appreciate your help with Innosilicon A9 ZMaster tho.
Added ZCL, ZEL, BTCP and VOT stratums to Powermining.pw
Equihash Pool Status: https://www.powermining.pw/site/gomining?algo=equihash
Zencash(ZEN):
Zelcash(ZEL):
Zclassic(ZCL):
VoteCoin(VOT):
Bitcoin Private(BTCP):
Example Config:
Frontend:
I`m also one of those that have been running the miner at 750 Mhz now for 24hr. No issues yet, all accepted shares and not a single HW error.
That is a bit of brilliant information, i was wondering how to set up my Z9 its coming this week..would you use Antpool for mining Zcash?...Thanks Equihash Pool Status: https://www.powermining.pw/site/gomining?algo=equihash
Zencash(ZEN):
Code:
URL: stratum+tcp://pool.powermining.pw:2142
Worker: YOUR ZENCASH WALLET ADDRESS
Password: Any password to identify your worker
Zelcash(ZEL):
Code:
URL: stratum+tcp://pool.powermining.pw:2143
Worker: YOUR ZELCASH WALLET ADDRESS
Password: Any password to identify your worker
Zclassic(ZCL):
Code:
URL: stratum+tcp://pool.powermining.pw:2144
Worker: YOUR ZCLASSIC WALLET ADDRESS
Password: Any password to identify your worker
VoteCoin(VOT):
Code:
URL: stratum+tcp://pool.powermining.pw:2145
Worker: YOUR VOTECOIN WALLET ADDRESS
Password: Any password to identify your worker
Bitcoin Private(BTCP):
Code:
URL: stratum+tcp://pool.powermining.pw:2146
Worker: YOUR BTCP WALLET ADDRESS
Password: Any password to identify your worker
Example Config:
Frontend:
I`m also one of those that have been running the miner at 750 Mhz now for 24hr. No issues yet, all accepted shares and not a single HW error.
Antpool should work fine for Zcash, but there are other pools in first post who have ZEC also thats confirmed to work.
Added ZCL, ZEL, BTCP and VOT stratums to Powermining.pw
Equihash Pool Status: https://www.powermining.pw/site/gomining?algo=equihash
Zencash(ZEN):
Zelcash(ZEL):
Zclassic(ZCL):
VoteCoin(VOT):
Bitcoin Private(BTCP):
Example Config:
https://preview.ibb.co/jg9Vzo/z91_miner_config.png
Frontend:
https://preview.ibb.co/hdTOKo/zclassic.png
I`m also one of those that have been running the miner at 750 Mhz now for 24hr. No issues yet, all accepted shares and not a single HW error.
That is a bit of brilliant information, i was wondering how to set up my Z9 its coming this week..would you use Antpool for mining Zcash?...Thanks Equihash Pool Status: https://www.powermining.pw/site/gomining?algo=equihash
Zencash(ZEN):
Code:
URL: stratum+tcp://pool.powermining.pw:2142
Worker: YOUR ZENCASH WALLET ADDRESS
Password: Any password to identify your worker
Zelcash(ZEL):
Code:
URL: stratum+tcp://pool.powermining.pw:2143
Worker: YOUR ZELCASH WALLET ADDRESS
Password: Any password to identify your worker
Zclassic(ZCL):
Code:
URL: stratum+tcp://pool.powermining.pw:2144
Worker: YOUR ZCLASSIC WALLET ADDRESS
Password: Any password to identify your worker
VoteCoin(VOT):
Code:
URL: stratum+tcp://pool.powermining.pw:2145
Worker: YOUR VOTECOIN WALLET ADDRESS
Password: Any password to identify your worker
Bitcoin Private(BTCP):
Code:
URL: stratum+tcp://pool.powermining.pw:2146
Worker: YOUR BTCP WALLET ADDRESS
Password: Any password to identify your worker
Example Config:
https://preview.ibb.co/jg9Vzo/z91_miner_config.png
Frontend:
https://preview.ibb.co/hdTOKo/zclassic.png
I`m also one of those that have been running the miner at 750 Mhz now for 24hr. No issues yet, all accepted shares and not a single HW error.
Thank you for posting, let us know if you keep it at 750 and how it responds. Also, I see you are on MPH. For some reason my Z9 is earning on MPH, but it is not registering on the dashboard, graphs, worker page etc. Did you have any similar problems? I have successfully mined using the Equihash switching, BTG, ZEN, ZCL and ZEC. I am generating coins but no record of my miner at all on the pool.
For equihash auto switch, gotta add the workername to the individual equihash coins for it to show. I have the same issue with my GPU rigs.
Added ZCL, ZEL, BTCP and VOT stratums to Powermining.pw
Equihash Pool Status: https://www.powermining.pw/site/gomining?algo=equihash
Zencash(ZEN):
Zelcash(ZEL):
Zclassic(ZCL):
VoteCoin(VOT):
Bitcoin Private(BTCP):
Example Config:
Frontend:
I`m also one of those that have been running the miner at 750 Mhz now for 24hr. No issues yet, all accepted shares and not a single HW error.
Equihash Pool Status: https://www.powermining.pw/site/gomining?algo=equihash
Zencash(ZEN):
Code:
URL: stratum+tcp://pool.powermining.pw:2142
Worker: YOUR ZENCASH WALLET ADDRESS
Password: Any password to identify your worker
Zelcash(ZEL):
Code:
URL: stratum+tcp://pool.powermining.pw:2143
Worker: YOUR ZELCASH WALLET ADDRESS
Password: Any password to identify your worker
Zclassic(ZCL):
Code:
URL: stratum+tcp://pool.powermining.pw:2144
Worker: YOUR ZCLASSIC WALLET ADDRESS
Password: Any password to identify your worker
VoteCoin(VOT):
Code:
URL: stratum+tcp://pool.powermining.pw:2145
Worker: YOUR VOTECOIN WALLET ADDRESS
Password: Any password to identify your worker
Bitcoin Private(BTCP):
Code:
URL: stratum+tcp://pool.powermining.pw:2146
Worker: YOUR BTCP WALLET ADDRESS
Password: Any password to identify your worker
Example Config:
Frontend:
I`m also one of those that have been running the miner at 750 Mhz now for 24hr. No issues yet, all accepted shares and not a single HW error.
So I have been running mine wide open at 750 MHz (the max you can set), is it seems to take it just fine.
Here's power consumption running at 750 MHz. Note that there are peaks as high as 485 Watts, so keep that in mind if you plan to run several of these from a single PSU. The baseline consumption running maxed out is 350 Watts.
http://www.cstone.net/~dk/z9_750_10.PNG
After 5 hours 20 minutes, average KSol/S is 16.39 and 0 HW errors:
http://www.cstone.net/~dk/z9_750_11.PNG
And things are looking great pool side as well:
http://www.cstone.net/~dk/z9_750_12.PNG
http://www.cstone.net/~dk/z9_750_13.PNG
From the above graph, you can see where I went from a 650 to a 750 OC setting.
Wish I had about a dozen of these last fall!
Here's power consumption running at 750 MHz. Note that there are peaks as high as 485 Watts, so keep that in mind if you plan to run several of these from a single PSU. The baseline consumption running maxed out is 350 Watts.
http://www.cstone.net/~dk/z9_750_10.PNG
After 5 hours 20 minutes, average KSol/S is 16.39 and 0 HW errors:
http://www.cstone.net/~dk/z9_750_11.PNG
And things are looking great pool side as well:
http://www.cstone.net/~dk/z9_750_12.PNG
http://www.cstone.net/~dk/z9_750_13.PNG
From the above graph, you can see where I went from a 650 to a 750 OC setting.
Wish I had about a dozen of these last fall!
Thank you for posting, let us know if you keep it at 750 and how it responds. Also, I see you are on MPH. For some reason my Z9 is earning on MPH, but it is not registering on the dashboard, graphs, worker page etc. Did you have any similar problems? I have successfully mined using the Equihash switching, BTG, ZEN, ZCL and ZEC. I am generating coins but no record of my miner at all on the pool.
Here's my Bitmain Antminer Z9 Mini review if anyone is interested, thanks to Crazydane for the trustworthy watt report @ 750 OC
Added this thread to the description of the video as it is a great resource and love OP taking time to add to it/update the pools that are working with the equihash asics
https://www.youtube.com/watch?v=Et6kIc7xhPc&feature=youtu.be
Added this thread to the description of the video as it is a great resource and love OP taking time to add to it/update the pools that are working with the equihash asics
https://www.youtube.com/watch?v=Et6kIc7xhPc&feature=youtu.be
I'll test mine on Prohashing when I get it but I'm waiting on tracking
Someone posted over on Prohashing, looks like the Z9 is not working there at this time.
Just saw an updated post on Prohashing, it is reported to be working using the algo specific equihash port 3336. I will have my Z9 soon and will confirm.
I suspect this should work on 3336 because my GPU miners work better on the dedicated port.
So I have been running mine wide open at 750 MHz (the max you can set), is it seems to take it just fine.
Here's power consumption running at 750 MHz. Note that there are peaks as high as 485 Watts, so keep that in mind if you plan to run several of these from a single PSU. The baseline consumption running maxed out is 350 Watts.
After 5 hours 20 minutes, average KSol/S is 16.39 and 0 HW errors:
And things are looking great pool side as well:
From the above graph, you can see where I went from a 650 to a 750 OC setting.
Wish I had about a dozen of these last fall!
Here's power consumption running at 750 MHz. Note that there are peaks as high as 485 Watts, so keep that in mind if you plan to run several of these from a single PSU. The baseline consumption running maxed out is 350 Watts.
After 5 hours 20 minutes, average KSol/S is 16.39 and 0 HW errors:
And things are looking great pool side as well:
From the above graph, you can see where I went from a 650 to a 750 OC setting.
Wish I had about a dozen of these last fall!
Some good info here, thanks for sharing this.
So I have been running mine wide open at 750 MHz (the max you can set), is it seems to take it just fine.
Here's power consumption running at 750 MHz. Note that there are peaks as high as 485 Watts, so keep that in mind if you plan to run several of these from a single PSU. The baseline consumption running maxed out is 350 Watts.
After 5 hours 20 minutes, average KSol/S is 16.39 and 0 HW errors:
And things are looking great pool side as well:
From the above graph, you can see where I went from a 650 to a 750 OC setting.
Wish I had about a dozen of these last fall!
Here's power consumption running at 750 MHz. Note that there are peaks as high as 485 Watts, so keep that in mind if you plan to run several of these from a single PSU. The baseline consumption running maxed out is 350 Watts.
After 5 hours 20 minutes, average KSol/S is 16.39 and 0 HW errors:
And things are looking great pool side as well:
From the above graph, you can see where I went from a 650 to a 750 OC setting.
Wish I had about a dozen of these last fall!
My Z9 Mini is on the Way now 
Is Nicehash still working bad and are any mining pools for ZCL available?
Is Nicehash still working bad and are any mining pools for ZCL available?
Zero change in Nicehash as of last Friday. Others may have had more luck, but no dice here, still averaging 50%+ rejected...
And hmm. Nobody DID do any ZCL testing (or reporting at any rate). Hmm. I'm sure we'll have some more feedback soon, but I'll add the coin to the testing section (I avoid it like the plague, personally, too many wallet issues, so I haven't tried).
I've having the same issue with the Anitminer Z9 Mini and Nicehash. It starts out with low reject rates, sometimes zero. But over time it drops and drops until it fluctuates from 100% rejected to 80% rejected. Reboot and the same thing happens. I've tried different speeds - no difference. I've tried pools in USA, EU, HK, Etc. All work the same.
Did you figure it out?
Did you give up and pick some other solution?
What was it?
Anyone else?
I really just wanted instant bitcoin ... but I guess I may need to mine a particular coin.
Any good sites for Equihash mining profits besides whattomine?
Off the wall profitable coins?
Lots of questions (and frustration) - Thank you
Nicehash works just fine for me so far with no disconnects, anyone know how long before it bombs out?
I think if it started working fine, then you should be good, until the next reboot.
Nicehash works just fine for me so far with no disconnects, anyone know how long before it bombs out?
Can someone test if it works on Mining pool hub equihash auto switch port?
Mine has yet to ship.
Mine has yet to ship.
Works just fine, I tried the Auto switch, Zcash, Zencash, BTG, and Zclassic and all work.
Can someone test if it works on Mining pool hub equihash auto switch port?
Mine has yet to ship.
Mine has yet to ship.
Updated and added confirmed fork info to the main post. Please feel free to add links to any announcements to this thread as well and I will update the main as best as I can.
I believe someone said Zec is working on Supernova but it’s not listed on the first post.All coins AFAIK are now working on Suprnova. I thought I'd changed that, thanks for pointing it out.
Jump to: