Z9 list of working pools/Fork updates - page 37.

topgeek

member

Activity: 96

Merit: 10

Quote from: SlushPool official on June 21, 2018, 04:08:07 PM

Quote from: mgoz on June 19, 2018, 10:18:53 AM

Any updates with Slush?

We are still looking for a proud owner of Z9 or A9 that would be willing to help us with debugging.

We would really appreciate your help and we only need few minutes of your work.

Please contact us here and we will let you know what to do: https://support.slushpool.com/conversation/new

Thank you!

I have one available and sent you a note.
cheers.

Just tested slushpool with ZEC and 100% rejected.
(I use slushpool for BTC).

Dilld

newbie

Activity: 1

Merit: 0

Any Komodo mining pools?

not.you

legendary

Activity: 1726

Merit: 1018

Quote from: OurManInHavana on June 21, 2018, 08:02:08 AM

If NiceHash isn't working - I think I could point to the MiningPoolHub equihash autoswitching port (17023), set my autoexchange preference to BTC... and end up with the same thing? It should mine the most profitable equihash coin MPH supports (ZCL/BTG/ZEC/ZEN) and keep slowly converting it to Bitcoin?

The only hitch for this plan (same plan I have btw) is that MPH uses bittrex to auto-exchange BTG and the bittrex BTG wallet has been down for like more than a month. So for BTG specifically, if the MPH auto-switch port is mining it at all, you may want to not set it for auto-exchange and either manually exchange it on cryptopia yourself or accumulate it and wait for bittrex (don't hold your breath).

DropdCoin

newbie

Activity: 4

Merit: 0

Quote from: SlushPool official on June 21, 2018, 04:08:07 PM

Quote from: mgoz on June 19, 2018, 10:18:53 AM

Any updates with Slush?

We are still looking for a proud owner of Z9 or A9 that would be willing to help us with debugging.

We would really appreciate your help and we only need few minutes of your work.

Please contact us here and we will let you know what to do: https://support.slushpool.com/conversation/new

Thank you!

Just tested an emailed my feedback.

mgoz

full member

Activity: 265

Merit: 232

Quote from: SlushPool official on June 21, 2018, 04:08:07 PM

We are still looking for a proud owner of Z9 or A9 that would be willing to help us with debugging.

Contacted. Should have mine tomorrow.

htautosjay

newbie

Activity: 168

Merit: 0

Quote from: SlushPool official on June 21, 2018, 04:08:07 PM

Quote from: mgoz on June 19, 2018, 10:18:53 AM

Any updates with Slush?

We are still looking for a proud owner of Z9 or A9 that would be willing to help us with debugging.

We would really appreciate your help and we only need few minutes of your work.

Please contact us here and we will let you know what to do: https://support.slushpool.com/conversation/new

Thank you!

I have one on the way if no one steps us first you can use mine..should be with me Tuesday 26th June

BITMAIN Order Shipped
Order ID: 003201805040765567
Date: 2018-05-04 18:02:08
Total: 0.23129421 BTC
Payment method: Bitcoin Payment
Order Details
Antminer Z9 mini × 1

SlushPool official

copper member

Activity: 94

Merit: 12

BTC mining: Slush Pool, Stratum V2 & Braiins OS+

Quote from: mgoz on June 19, 2018, 10:18:53 AM

Any updates with Slush?

We are still looking for a proud owner of Z9 or A9 that would be willing to help us with debugging.

We would really appreciate your help and we only need few minutes of your work.

Please contact us here and we will let you know what to do: https://support.slushpool.com/conversation/new

Thank you!

htautosjay

newbie

Activity: 168

Merit: 0

Quote from: microtechies on June 14, 2018, 03:47:46 PM

Quote from: htautosjay on June 13, 2018, 03:52:46 PM

Quote from: micairvas on June 13, 2018, 02:07:53 AM

Quote from: microtechies on June 05, 2018, 08:07:56 AM

Quote from: greyday on June 04, 2018, 12:37:52 PM

Quote from: xpulse on June 04, 2018, 12:21:53 PM

Quote from: microtechies on June 04, 2018, 12:19:11 PM

I can confirm that PPNLS payouts with Antpool is not working but PPS is. Also my Freq is 643 & I'm getting an average of 15.4ksol

15.4 KSol = Almost my 3 rigs full of 1080TI and Titan Xp, but less power efficient :-)

Significantly, I'd estimate that overclocked z9 is running at under 500W.

It is using 387 watts at 15.4 ksol

Antminer Z9 mini running on 387 watts, overclocked to Freq 643? Are you sure? In that case I can connect 4 miners to EVGA 1600 P2 power supply and overclock them to 643 freq?

Hay buddy, my Z9 hasn't arrived yet.. have you got it working overclocked at 643?. what pool are you using?... Cheers

Was using Antpool but been using https://bitcoin-gold.miningpoolhub.com/

These are my payouts for BTC Gold

2018-06-13 (UTC)   0.86924967
2018-06-12 (UTC)   0.87895445
2018-06-11 (UTC)   0.71100779
2018-06-10 (UTC)   0.92915138
2018-06-09 (UTC)   0.54980312
2018-06-08 (UTC)   0.81474208
2018-06-07 (UTC)   0.62056684

Hay buddy can you tell me what URL to use for the Z9 to mine BTCG please? and what pool and wallet you think is best to use.
Thanks

Dagamus(NM)

newbie

Activity: 48

Merit: 0

Thank you

zsmith

member

Activity: 142

Merit: 60

It does not come with much instruction but you do access it through a web based interface. You just put the IP address in the miner, which should be something like http://192.168.1.70 and the login is root, pw is root. There is a tab for mining configuration and that is where you set your pool urls.

greyday

member

Activity: 434

Merit: 52

Quote from: Dagamus(NM) on June 21, 2018, 09:35:43 AM

Quote from: greyday on June 21, 2018, 09:22:55 AM

Quote from: Dagamus(NM) on June 21, 2018, 08:43:54 AM

Quote from: OurManInHavana on June 21, 2018, 08:02:08 AM

If NiceHash isn't working - I think I could point to the MiningPoolHub equihash autoswitching port (17023), set my autoexchange preference to BTC... and end up with the same thing? It should mine the most profitable equihash coin MPH supports (ZCL/BTG/ZEC/ZEN) and keep slowly converting it to Bitcoin?

Should or does?

Do these asics come with setup instructions? My first asic is delivered tomorrow.

From what I have read, I connect it to the ethernet cable, plug it in, then go to my router address to access the miner setup gui and from there enter pool info. Am I missing anything?

If miningpoolhub is working well then I guess that is where I will point my miner.

Heh, you're in for a treat.

Yup, very, very basic instructions are included. But yes, you basically just change the pool info (and your password). It'll be set to Antpool addresses when it arrives.

Yeah, I expect the instructions will be the finest technical document known to man. Seems pretty simple. I know my router address, but unsure of how exactly to access the asic. Is it a web page or a downloaded GUI program to update settings, pool address, etc.

Find it on the network and just enter the local url in a browser. They run on DHCP so it'll be in whatever range your router sets up.

Dagamus(NM)

newbie

Activity: 48

Merit: 0

Quote from: greyday on June 21, 2018, 09:22:55 AM

Quote from: Dagamus(NM) on June 21, 2018, 08:43:54 AM

Quote from: OurManInHavana on June 21, 2018, 08:02:08 AM

If NiceHash isn't working - I think I could point to the MiningPoolHub equihash autoswitching port (17023), set my autoexchange preference to BTC... and end up with the same thing? It should mine the most profitable equihash coin MPH supports (ZCL/BTG/ZEC/ZEN) and keep slowly converting it to Bitcoin?

Should or does?

Do these asics come with setup instructions? My first asic is delivered tomorrow.

From what I have read, I connect it to the ethernet cable, plug it in, then go to my router address to access the miner setup gui and from there enter pool info. Am I missing anything?

If miningpoolhub is working well then I guess that is where I will point my miner.

Heh, you're in for a treat.

Yup, very, very basic instructions are included. But yes, you basically just change the pool info (and your password). It'll be set to Antpool addresses when it arrives.

Yeah, I expect the instructions will be the finest technical document known to man. Seems pretty simple. I know my router address, but unsure of how exactly to access the asic. Is it a web page or a downloaded GUI program to update settings, pool address, etc.

greyday

member

Activity: 434

Merit: 52

Quote from: Dagamus(NM) on June 21, 2018, 08:43:54 AM

Quote from: OurManInHavana on June 21, 2018, 08:02:08 AM

If NiceHash isn't working - I think I could point to the MiningPoolHub equihash autoswitching port (17023), set my autoexchange preference to BTC... and end up with the same thing? It should mine the most profitable equihash coin MPH supports (ZCL/BTG/ZEC/ZEN) and keep slowly converting it to Bitcoin?

Should or does?

Do these asics come with setup instructions? My first asic is delivered tomorrow.

From what I have read, I connect it to the ethernet cable, plug it in, then go to my router address to access the miner setup gui and from there enter pool info. Am I missing anything?

If miningpoolhub is working well then I guess that is where I will point my miner.

Heh, you're in for a treat.

Yup, very, very basic instructions are included. But yes, you basically just change the pool info (and your password). It'll be set to Antpool addresses when it arrives.

Dagamus(NM)

newbie

Activity: 48

Merit: 0

Quote from: OurManInHavana on June 21, 2018, 08:02:08 AM

If NiceHash isn't working - I think I could point to the MiningPoolHub equihash autoswitching port (17023), set my autoexchange preference to BTC... and end up with the same thing? It should mine the most profitable equihash coin MPH supports (ZCL/BTG/ZEC/ZEN) and keep slowly converting it to Bitcoin?

Should or does?

Do these asics come with setup instructions? My first asic is delivered tomorrow.

From what I have read, I connect it to the ethernet cable, plug it in, then go to my router address to access the miner setup gui and from there enter pool info. Am I missing anything?

If miningpoolhub is working well then I guess that is where I will point my miner.

OurManInHavana

member

Activity: 91

Merit: 10

If NiceHash isn't working - I think I could point to the MiningPoolHub equihash autoswitching port (17023), set my autoexchange preference to BTC... and end up with the same thing? It should mine the most profitable equihash coin MPH supports (ZCL/BTG/ZEC/ZEN) and keep slowly converting it to Bitcoin?

greyday

member

Activity: 434

Merit: 52

Quote from: Lypus on June 21, 2018, 06:01:20 AM

My Z9 Mini is on the Way now Grin

Is Nicehash still working bad and are any mining pools for ZCL available?

Zero change in Nicehash as of last Friday. Others may have had more luck, but no dice here, still averaging 50%+ rejected...

And hmm. Nobody DID do any ZCL testing (or reporting at any rate). Hmm. I'm sure we'll have some more feedback soon, but I'll add the coin to the testing section (I avoid it like the plague, personally, too many wallet issues, so I haven't tried).

greyday

member

Activity: 434

Merit: 52

Quote from: mgoz on June 19, 2018, 10:18:53 AM

Any updates with Slush?

None yet, I haven't had any time to do any testing the past week or so, apologies for that. I'm sure we'll see a bunch tomorrow and friday as the rest of batch 1 arrives though.

Lypus

newbie

Activity: 12

Merit: 0

My Z9 Mini is on the Way now Grin

Is Nicehash still working bad and are any mining pools for ZCL available?

mgoz

full member

Activity: 265

Merit: 232

Any updates with Slush?

htautosjay

newbie

Activity: 168

Merit: 0

Quote from: microtechies on June 18, 2018, 06:07:59 AM

Quote from: htautosjay on June 14, 2018, 04:26:21 PM

Quote from: microtechies on June 14, 2018, 03:47:46 PM

Quote from: htautosjay on June 13, 2018, 03:52:46 PM

Quote from: micairvas on June 13, 2018, 02:07:53 AM

Quote from: microtechies on June 05, 2018, 08:07:56 AM

Quote from: greyday on June 04, 2018, 12:37:52 PM

Quote from: xpulse on June 04, 2018, 12:21:53 PM

Quote from: microtechies on June 04, 2018, 12:19:11 PM

I can confirm that PPNLS payouts with Antpool is not working but PPS is. Also my Freq is 643 & I'm getting an average of 15.4ksol

15.4 KSol = Almost my 3 rigs full of 1080TI and Titan Xp, but less power efficient :-)

Significantly, I'd estimate that overclocked z9 is running at under 500W.

It is using 387 watts at 15.4 ksol

Antminer Z9 mini running on 387 watts, overclocked to Freq 643? Are you sure? In that case I can connect 4 miners to EVGA 1600 P2 power supply and overclock them to 643 freq?

Hay buddy, my Z9 hasn't arrived yet.. have you got it working overclocked at 643?. what pool are you using?... Cheers

Was using Antpool but been using https://bitcoin-gold.miningpoolhub.com/

These are my payouts for BTC Gold

2018-06-13 (UTC)   0.86924967
2018-06-12 (UTC)   0.87895445
2018-06-11 (UTC)   0.71100779
2018-06-10 (UTC)   0.92915138
2018-06-09 (UTC)   0.54980312
2018-06-08 (UTC)   0.81474208
2018-06-07 (UTC)   0.62056684

Awesome that is brilliant, are you still pulling 14+sols?.. is the acceptance ok on these pools?... not racking up HW faults?... I cant wait for mine to arrive i have 1 in batch one and another coming in September.. Thank you and thank you for sharing

Yes it is, no HW errors and very stable

Awesome

Topic: Z9 list of working pools/Fork updates - page 37. (Read 36880 times)