Zealot/Enemy (z-enemy) NVIDIA GPU miner (ver2.6.2 - kawpow RavenCoin). - page 21.

tazmako

full member

Activity: 350

Merit: 100

XDNA - Most innovative cryptocurrency in 2018

Quote from: mrsalve01 on August 17, 2018, 09:26:43 PM

Quote from: @enemy on August 17, 2018, 03:18:01 PM

Quote from: mrsalve01 on August 17, 2018, 12:43:30 PM

What would be HEX algo difficulty for 1.16?

Built in 23 crashes my miner in few sec.

Hex new algo , new settings . Try to lower your PL in the first place ( 50-70%) , to obtain stability , intensity not much important at all (if you do not care about the profit) .

Got over intensity problem . It works ok with 23 now.

I need to try power limit thou because with 1.15a. and 1.16 proble is that it works 2-3H and then it crashes miner so bad that only restart helps.
I even tryed afterburner off. Same thing.

It's all with hex algo.

Tryed x16r run'd about 5 hours without a problems.

thanks i have same problem with hex too

mrsalve01

newbie

Activity: 74

Merit: 0

Quote from: @enemy on August 17, 2018, 03:18:01 PM

Quote from: mrsalve01 on August 17, 2018, 12:43:30 PM

What would be HEX algo difficulty for 1.16?

Built in 23 crashes my miner in few sec.

Hex new algo , new settings . Try to lower your PL in the first place ( 50-70%) , to obtain stability , intensity not much important at all (if you do not care about the profit) .

Got over intensity problem . It works ok with 23 now.

I need to try power limit thou because with 1.15a. and 1.16 proble is that it works 2-3H and then it crashes miner so bad that only restart helps.
I even tryed afterburner off. Same thing.

It's all with hex algo.

Tryed x16r run'd about 5 hours without a problems.

@enemy

member

Activity: 81

Merit: 16

Quote from: mrsalve01 on August 17, 2018, 12:43:30 PM

What would be HEX algo difficulty for 1.16?

Built in 23 crashes my miner in few sec.

Hex new algo , new settings . Try to lower your PL in the first place ( 50-70%) , to obtain stability , intensity not much important at all (if you do not care about the profit) .

mrsalve01

newbie

Activity: 74

Merit: 0

What would be HEX algo difficulty for 1.16?

Built in 23 crashes my miner in few sec.

UselessGuru

jr. member

Activity: 200

Merit: 3

Quote from: Coongcoonggg on August 16, 2018, 08:46:54 PM

I change bat file to select only gpu1 and gpu2 but not gpu3? How can I do this?

add -d 0,1

z-enemy.exe --help is your friend :-)

Coongcoonggg

newbie

Activity: 56

Merit: 0

I change bat file to select only gpu1 and gpu2 but not gpu3? How can I do this?

TheAnnoyer

newbie

Activity: 95

Merit: 0

Truth.

Enemy and CryptoDredge best miners. Long better than past miners. All algorithms minus few.

Ravencoin coin best for few hours a week.

1.16 Great!

Checking daily for 1.17.

jugger1028

jr. member

Activity: 213

Merit: 3

1.16 looks good, too bad there's no damn coins out there worth mining. Keep up the good work though!

UselessGuru

jr. member

Activity: 200

Merit: 3

Suggestion / feature request

Please add --benchmark parameter.

E.g. for X16r it would benchmark each of the 16 sub-algorithms n times and then report the average hash rate.

In theory this will produce the most accurate hash rate average because over time each sub-algorithm would be run equally often.

Any thoughts?

sanltc

newbie

Activity: 10

Merit: 0

Still not work at ETHOS

Quote

[INFO ] 18/08/15 12:12:01 zealot/enemy-1.16 miner (64 bit)
[INFO ] 18/08/15 12:12:01 NVIDIA CUDA 9.0
./z-enemy: relocation error: ./z-enemy: symbol _ZNSt13random_device7_M_initERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaI cEEE, version GLIBCXX_3.4.21 not defined in file libstdc++.so.6 with link time reference

[INFO ] 18/08/15 12:13:19 zealot/enemy-1.16 miner (64 bit)
[INFO ] 18/08/15 12:13:19 NVIDIA CUDA 9.1
./z-enemy: relocation error: ./z-enemy: symbol _ZNSt13random_device7_M_initERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaI cEEE, version GLIBCXX_3.4.21 not defined in file libstdc++.so.6 with link time reference

Any ideas?

@enemy

member

Activity: 81

Merit: 16

Z-ENEMY VER 1.16 (PUBLIC)

IMPORTANT:
For maximum performance make sure you have latest drivers (ver. 398+)
http://www.nvidia.com/Download/index.aspx

zealot/enemy-1.16 (z-enemy) From: Dk & Enemy

- Performance improvements:+7-10% hex(XDNA),+5%-7% x16r&s, few % for other algos (x17, c11, sonoa, renesis, aergo)
- Experimental feature: intensity limit increased (most algos now allow intensity up to 25, test at your own risk)

Windows :
Cuda 9.1 x32 : https://mega.nz/#!xCgVCDjB!iBH6uSoCZQh70-CtZOvNRHa8fodDjKiN5K10aIFqZ2I
Cuda 9.1 x64 : https://mega.nz/#!hfpzGJxB!8EN5RRvT9EVlxbjy49BLs5X1e_ISoPLA7Dij4tAK9Nw

Cuda 9.2 x32 : https://mega.nz/#!IfwxCJTD!zQ-9MvV9biW_P97v-2Y2OercifIeBhVovsKbogbZDco
Cuda 9.2 x64 : https://mega.nz/#!oeoVVarD!Na0vNdHEVzPTsImrdQ9Ss2Kf70i0b7Wsg9iUX2ZdRck

Linux: (HiveOS, PiMP OS , EthOS & Ubuntu)
Cuda 9.0 : https://mega.nz/#!AWxzAB4S!MbPBqDhFG-ACtuaxOyWAos7Og_diQ8-WXa7vE2RSW28
Cuda 9.1 : https://mega.nz/#!oOoQlIAY!lj8OrFCtFDra2xdZQqHyPmuuEK9tJ3TVVeCSNjWhDrQ
Cuda 9.2 : https://mega.nz/#!YepCHKDC!vVhNTmooSmd3P8sw77DqRFTl5jAQEyqMJQdISURtdBY

dragonmike

hero member

Activity: 1274

Merit: 556

1.16 is still being tested.
Get on Discord if you want to check it out.

HeroKung

newbie

Activity: 18

Merit: 0

Quote from: asumar on August 14, 2018, 04:27:44 PM

@enemy

https://coinguides.org/enemy-1-16/

Z-Enemy miner version 1.16
- this scam\virus?

want to know too official thread not have 1.16 on release
why other web have 1.16.

asumar

newbie

Activity: 24

Merit: 0

@enemy

https://coinguides.org/enemy-1-16/

Z-Enemy miner version 1.16
- this scam\virus?

Divinity666

jr. member

Activity: 312

Merit: 2

Quote from: MaxRock on August 13, 2018, 10:35:10 AM

What settings do you have for 1080TI? I have only 23-24MH(

23-24Mhs on avg. is good, 30Mhs+ is at peak on fastest algorithms. Fot GTX1080Ti's I get 22-23Mhs avg. at 190Wt(also avg) + curve coreOC and mem -502 and for GTX1080 ~17Mhs on avg. at 145Wt + coreOC and stock mem. My core overclock is like this: 6.25mV step = +12.5Mhz(1 step up for coreclock in the curve), +12.5mV step = +25Mhz (2 steps up fore coreclock in curve), on starting cclock differs depending on card.

sanltc

newbie

Activity: 10

Merit: 0

I am running z-enemy-1.16-cuda90.tar.gz at Ethos 1.3.2 (ubuntu 14) but got this error:

./z-enemy: relocation error: ./z-enemy: symbol _ZNSt13random_device7_M_initERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaI cEEE, version GLIBCXX_3.4.21 not defined in file libstdc++.so.6 with link time reference

# ls -la /usr/lib/x86_64-linux-gnu/libstdc++.so.6*
lrwxrwxrwx 1 root root 19 Jun 6 15:15 /usr/lib/x86_64-linux-gnu/libstdc++.so.6 -> libstdc++.so.6.0.25
-rw-r--r-- 1 root root 1126624 Jun 6 15:57 /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.25

Could you help me?
Thank you in advance

jkminkov

hero member

Activity: 698

Merit: 500

why are you screwing with my power limits, turning 114W card/power limit 60%/ into an oven 240W is not nice at all, fake miner gains, that's it!

miner85

newbie

Activity: 2

Merit: 0

Quote from: ggillies on August 13, 2018, 02:49:08 PM

Quote from: MaxRock on August 13, 2018, 10:35:10 AM

Quote from: ggillies on August 09, 2018, 04:50:40 PM

The newest version, 1-15a 64 bit is SERIOUSLY fast on X16r..!!! Like 31 MH/s fast on a 1080ti

https://mortalc01l.zenfolio.com/img/s/v-3/p3010989269-5.jpg

What settings do you have for 1080TI? I have only 23-24MH(

100% power, +100 GPU, +150 Mem.

Somebody know the best settings for 1070ti?

And is it safe to use 398.82 driver or is it better to use 398.36 ?

ggillies

newbie

Activity: 19

Merit: 0

Quote from: MaxRock on August 13, 2018, 10:35:10 AM

Quote from: ggillies on August 09, 2018, 04:50:40 PM

The newest version, 1-15a 64 bit is SERIOUSLY fast on X16r..!!! Like 31 MH/s fast on a 1080ti

https://mortalc01l.zenfolio.com/img/s/v-3/p3010989269-5.jpg

What settings do you have for 1080TI? I have only 23-24MH(

100% power, +100 GPU, +150 Mem.

MaxRock

newbie

Activity: 2

Merit: 0

Quote from: ggillies on August 09, 2018, 04:50:40 PM

The newest version, 1-15a 64 bit is SERIOUSLY fast on X16r..!!! Like 31 MH/s fast on a 1080ti

https://mortalc01l.zenfolio.com/img/s/v-3/p3010989269-5.jpg

What settings do you have for 1080TI? I have only 23-24MH(

Topic: Zealot/Enemy (z-enemy) NVIDIA GPU miner (ver2.6.2 - kawpow RavenCoin). - page 21. (Read 107074 times)