2.1T 900W, Innosilicon Blake256 D9 DecredMaster/ 3.83T 1380W, S11 SiaMaster

usamamalik

brand new

Activity: 0

Merit: 0

hey please help me how to recover password of d9. please help

mvelikov

newbie

Activity: 5

Merit: 0

Quote from: vincl on September 04, 2018, 06:52:46 AM

Quote from: mvelikov on September 04, 2018, 04:16:22 AM

Quote from: sweeperAA on May 17, 2018, 04:56:46 PM

Quote from: suchmoon on May 17, 2018, 04:15:52 PM

Quote from: CNoteFan on May 17, 2018, 02:35:21 PM

Quote from: CNoteFan on May 15, 2018, 07:58:30 PM

Anyone know the SSH credentials for these machines? I've searched both DragonMint and Innosilicon support with no luck.

Thanks

I emailed Innosilicon "post purchase support" concerning this and got the following:

Quote

Dear Customer,
Thanks for letting me know your concern. However, I'm sorry to let you know that we are unable to provide this. Hope for your understanding.

Try

root/innot1t2 or root/t1t2t3a5

These are for older miners but if Inno developers are as lazy as their support - it might work

Thanks for the info, but these didn't work. I also tried these combinations [root][admin]\[innod9][dragonadmin][t1t2t3a5d9].

Does anyone find the credentials. I have a hacked Innosilicon D9 and I can't change the user password, pools, etc.

for Z9 it is blacksheepwall, try this

That's it! Thank you very much!

vincl

member

Activity: 386

Merit: 18

Quote from: mvelikov on September 04, 2018, 04:16:22 AM

Quote from: sweeperAA on May 17, 2018, 04:56:46 PM

Quote from: suchmoon on May 17, 2018, 04:15:52 PM

Quote from: CNoteFan on May 17, 2018, 02:35:21 PM

Quote from: CNoteFan on May 15, 2018, 07:58:30 PM

Anyone know the SSH credentials for these machines? I've searched both DragonMint and Innosilicon support with no luck.

Thanks

I emailed Innosilicon "post purchase support" concerning this and got the following:

Quote

Dear Customer,
Thanks for letting me know your concern. However, I'm sorry to let you know that we are unable to provide this. Hope for your understanding.

Try

root/innot1t2 or root/t1t2t3a5

These are for older miners but if Inno developers are as lazy as their support - it might work

Thanks for the info, but these didn't work. I also tried these combinations [root][admin]\[innod9][dragonadmin][t1t2t3a5d9].

Does anyone find the credentials. I have a hacked Innosilicon D9 and I can't change the user password, pools, etc.

for Z9 it is blacksheepwall, try this

mvelikov

newbie

Activity: 5

Merit: 0

Quote from: sweeperAA on May 17, 2018, 04:56:46 PM

Quote from: suchmoon on May 17, 2018, 04:15:52 PM

Quote from: CNoteFan on May 17, 2018, 02:35:21 PM

Quote from: CNoteFan on May 15, 2018, 07:58:30 PM

Anyone know the SSH credentials for these machines? I've searched both DragonMint and Innosilicon support with no luck.

Thanks

I emailed Innosilicon "post purchase support" concerning this and got the following:

Quote

Dear Customer,
Thanks for letting me know your concern. However, I'm sorry to let you know that we are unable to provide this. Hope for your understanding.

Try

root/innot1t2 or root/t1t2t3a5

These are for older miners but if Inno developers are as lazy as their support - it might work

Thanks for the info, but these didn't work. I also tried these combinations [root][admin]\[innod9][dragonadmin][t1t2t3a5d9].

Does anyone find the credentials. I have a hacked Innosilicon D9 and I can't change the user password, pools, etc.

mansello

newbie

Activity: 32

Merit: 0

I used for a while uupool for Hcash

yrk1957

member

Activity: 531

Merit: 29

So is there even a pool for Hcash? Or just solo-mining?

mansello

newbie

Activity: 32

Merit: 0

Quote from: sweeperAA on August 23, 2018, 10:26:01 PM

Quote from: Inno_ASIC on August 23, 2018, 05:35:50 AM

Dear Valuable Innosilicon Miner Customer,

We’re glad to inform you that the firmware of D9\D9+ has been updated again after day and night’s efforts of our Innosilicon Firmware team.

For your better user experience, please download on:
D9: http://www.innosilicon.com.cn/download/d9_20180816_081036.swu

D9+: http://www.innosilicon.com.cn/download/d9+_20180816_081229.swu

Upated items:
- Support mining the HCash

You can upgrade the firmware as shown below:
http://www.innosilicon.com/statics/images/20180822134042.png

Please send email or add Skype [email protected] to our technical support team if you meet some problem when you update the firmware.

Innosilicon customer service team

Anyone who is thinking about upgrading their firmware on the D9 and still is going to mine decred, be aware that this has a change in it that results in 100% rejection rate from some decred pools. I've already contacted the pool operator and he explained to me that it was a bug in the D9 firmware and he was reaching out to inno directly to fix. I just reverted back to a previous firmware version.

In effect I have reverted the FW to the june version.

CryptoPapst

jr. member

Activity: 59

Merit: 1

This firmware is not working for coinmine.pl Angry

sweeperAA

jr. member

Activity: 55

Merit: 5

Quote from: Inno_ASIC on August 23, 2018, 05:35:50 AM

Dear Valuable Innosilicon Miner Customer,

We’re glad to inform you that the firmware of D9\D9+ has been updated again after day and night’s efforts of our Innosilicon Firmware team.

For your better user experience, please download on:
D9: http://www.innosilicon.com.cn/download/d9_20180816_081036.swu

D9+: http://www.innosilicon.com.cn/download/d9+_20180816_081229.swu

Upated items:
- Support mining the HCash

You can upgrade the firmware as shown below:

Please send email or add Skype [email protected] to our technical support team if you meet some problem when you update the firmware.

Innosilicon customer service team

Anyone who is thinking about upgrading their firmware on the D9 and still is going to mine decred, be aware that this has a change in it that results in 100% rejection rate from some decred pools. I've already contacted the pool operator and he explained to me that it was a bug in the D9 firmware and he was reaching out to inno directly to fix. I just reverted back to a previous firmware version.

whatever86

newbie

Activity: 8

Merit: 0

What pool support mining hcash??

Inno_ASIC

full member

Activity: 243

Merit: 108

Innosilicon ASIC official representative

Dear Valuable Innosilicon Miner Customer,

We’re glad to inform you that the firmware of D9\D9+ has been updated again after day and night’s efforts of our Innosilicon Firmware team.

For your better user experience, please download on:
D9: http://www.innosilicon.com.cn/download/d9_20180816_081036.swu

D9+: http://www.innosilicon.com.cn/download/d9+_20180816_081229.swu

Upated items:
- Support mining the HCash

You can upgrade the firmware as shown below:

Please send email or add Skype [email protected] to our technical support team if you meet some problem when you update the firmware.

Innosilicon customer service team

sweeperAA

jr. member

Activity: 55

Merit: 5

Quote from: thefix on August 21, 2018, 04:40:44 AM

What kind of power draw are you getting from the D9 the wall when you set these to efficient mode? I am thinking about picking one up used and was curious about the heat and noise levels when they are run in low power mode.

In efficiency mode, power draw is about 850W and hashes about 2.1Th pool side (even though the web interface shows 2.4Th). Noise isn't reduced too much, but this isn't a very noisy unit when compared to others (e.g., bitmain S9 or A3). Temperature runs at about 60-70C.

thefix

legendary

Activity: 1049

Merit: 1001

What kind of power draw are you getting from the D9 the wall when you set these to efficient mode? I am thinking about picking one up used and was curious about the heat and noise levels when they are run in low power mode.

ricecooker

newbie

Activity: 24

Merit: 0

Quote from: KashHappy on July 27, 2018, 01:23:05 AM

Curious to hear everyone's Hashrate poolside and daily rewards at this point. I'll start.

D9 (1st batch)
FW: 20180602.swu
UI: 2.3Th/s
Pool: Coinmine.pl
24hr Poolside Hash Rate: 2.27Th/s
Daily Rewards: 0.14 DCR

I'm still getting the random reboots, been online 11hrs, and crazy reading on fan speed of 255% on Performance mode.

Is anyone getting the advertised 2.4Th/s?

The daily reward seems to be ok, I get around that but with 2.04TH/s, on efficient mode because it is boiling hot here in the UK. I'm on f2pool. I get 2.5 TH/s on performance mode, june firmware. My reboots seems to be much milder now, around 2 days or more before resets.

Philopolymath

sr. member

Activity: 558

Merit: 295

Walter Russell's Cosmogony is RIGHT!

Well my S11/B52's with the latest Inno. firmware averages about 4.1Th. on factory setting 4.3Th on performance
BUT THE HW ERRORS ARE INSANE.....I think this is a stratum problem, (tons of invalid nonce messages) means pools aren't well set-up for ASICS
I have great airflow/cooling so tried the performance mode but power usage and temp increase does not justify the minuscule hashrate increase...and yes a board tends to die on performance and is tricky to get it back up with reboots and downgrade of tuning.
Also when running on performance tuning, units vibrate like hell when temps reach 80c and fans are 80%+ added noise is considerable

My D9/B29's have exact same issues. 1.8Th on Balanced 2.1Th on Factory 2.36Th on performance.
Same problem with insane amount of HW errors..Performance mode tuning is not worth the heat and power consumption and board problems.
At least they don't have the high vibration problem when running hot in performance tuning mode.

I have some IBelink's on the way...had enough of Inno/Dragon....unless they do another huge drop in price AND accept BTC at market rate.
Even then very reluctant.

KashHappy

jr. member

Activity: 57

Merit: 11

Curious to hear everyone's Hashrate poolside and daily rewards at this point. I'll start.

D9 (1st batch)
FW: 20180602.swu
UI: 2.3Th/s
Pool: Coinmine.pl
24hr Poolside Hash Rate: 2.27Th/s
Daily Rewards: 0.14 DCR

I'm still getting the random reboots, been online 11hrs, and crazy reading on fan speed of 255% on Performance mode.

Is anyone getting the advertised 2.4Th/s?

sweeperAA

jr. member

Activity: 55

Merit: 5

Quote from: ylpkm2 on July 21, 2018, 10:51:26 AM

Can anyone else give input on the july 20th firmware update? Worth it or not?

If you're referring to the July 6th firmware for the D9, I would suggest NOT doing it. Stay with the June firmware.

ylpkm2

newbie

Activity: 39

Merit: 0

Can anyone else give input on the july 20th firmware update? Worth it or not? Referring to b29+20180720_.... firmware.

sweeperAA

jr. member

Activity: 55

Merit: 5

Quote from: ?? on ??

Quote from: sweeperAA on July 16, 2018, 09:39:06 PM

Quote from: ?? on ??

Quote from: mansello on July 11, 2018, 06:22:58 AM

Quote from: CryptoPapst on July 11, 2018, 05:47:27 AM

Quote from: mansello on July 10, 2018, 04:05:56 PM

Quote from: sweeperAA on July 10, 2018, 02:35:02 PM

Don't know if you guys noticed but Inno released an updated firmware version for the D9 dated July 6. I had been running with it for a couple of days. It didn't fix the random reboots and it didn't provide any additional configuration options. It did seem to drop my hash rate without dropping power. I will be going back to the June firmware.

I have also downgraded the firmware to June firmware because I have not noticed nothing of better performance.

How can you downgrade the firmware? Huh

You can re-apply the June firmware without problems

Can someone share the D9 June firmware? It is no longer available on the Inno support website.

I have upgraded to July firmware and seems to be having more issue, one of the chip occasionally dropped off and will have to reboot to get it back up.

thanks,
ctan6611

I have it. If you can setup an FTP address, I can upload it to you. You can also try asking Inno to send it to you.

Thanks. Could you please upload the Inno D9 June firmware to below Google drive? The link should be anyone can upload the file so you may sign in with your google account to upload.

https://drive.google.com/drive/folders/10TJytm29Rll5-puJKBD53hLee4tqm8gL?usp=sharing

thanks,
ctan6611

Should be there now.

sweeperAA

jr. member

Activity: 55

Merit: 5

Quote from: ?? on ??

Quote from: mansello on July 11, 2018, 06:22:58 AM

Quote from: CryptoPapst on July 11, 2018, 05:47:27 AM

Quote from: mansello on July 10, 2018, 04:05:56 PM

Quote from: sweeperAA on July 10, 2018, 02:35:02 PM

Don't know if you guys noticed but Inno released an updated firmware version for the D9 dated July 6. I had been running with it for a couple of days. It didn't fix the random reboots and it didn't provide any additional configuration options. It did seem to drop my hash rate without dropping power. I will be going back to the June firmware.

I have also downgraded the firmware to June firmware because I have not noticed nothing of better performance.

How can you downgrade the firmware? Huh

You can re-apply the June firmware without problems

Can someone share the D9 June firmware? It is no longer available on the Inno support website.

I have upgraded to July firmware and seems to be having more issue, one of the chip occasionally dropped off and will have to reboot to get it back up.

thanks,
ctan6611

I have it. If you can setup an FTP address, I can upload it to you. You can also try asking Inno to send it to you.

Topic: 2.1T 900W, Innosilicon Blake256 D9 DecredMaster/ 3.83T 1380W, S11 SiaMaster (Read 8138 times)