Topic: 2.1T 900W, Innosilicon Blake256 D9 DecredMaster/ 3.83T 1380W, S11 SiaMaster - page 8. (Read 8123 times)
May 25, 2018, 03:16:39 AM
Tried all that and NO luck.
May 25, 2018, 02:03:52 AM
I flashed my D9 today with the new firmware and one hash board seems to have stopped working. And I cannot flash back to the old firmware either. Please help
Unplug power then try booting again. If board does not still work Press reset on front of machine until red light or beep sounds
May 25, 2018, 01:57:05 AM
I flashed my D9 today with the new firmware and one hash board seems to have stopped working. And I cannot flash back to the old firmware either. Please help
ouch! thats suck
May 24, 2018, 11:45:04 PM
I flashed my D9 today with the new firmware and one hash board seems to have stopped working. And I cannot flash back to the old firmware either. Please help
May 24, 2018, 09:43:23 PM
Dear D9 customer,
As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
I just upgraded my firmware on both my miners and now I'm getting some really crazy hash rates. I'm getting anywhere between 1TH/s to 7TH/s As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
is this normal?Thank you for your feedback. Any problem for technical problem you can send email or add Skype [email protected] We will try our best to help you asap. Thank you.
May 24, 2018, 02:23:08 PM
Dear D9 customer,
As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
I just upgraded my firmware on both my miners and now I'm getting some really crazy hash rates. I'm getting anywhere between 1TH/s to 7TH/s As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
is this normal?I also updated the firmware, here are the comparisons for me:
Old Firmware: 2.05 Th/S pool hash rate, (2.36 from GUI) @ 830W, Average 75C with fan speed at 75%
New Firmware: 2.35 Th/S pool hash rate, (2.4 from GUI) @ 950W, Average 71C with fan speed at 55%
Obviously, I've only been running with the new firmware for a couple hours, but so far, it seems better. I have not done the auto-calibration.
Edit: Added hash rate reported sources.
Thanks for sharing your findings sweeper! Where did you get your wattage readings from? Trying to determine how accurate they are. TIA
I have one of these: https://www.bsaelectronics.com/collections/dryer-buddys
May 24, 2018, 01:52:20 PM
Dear D9 customer,
As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
I just upgraded my firmware on both my miners and now I'm getting some really crazy hash rates. I'm getting anywhere between 1TH/s to 7TH/s As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
is this normal?I also updated the firmware, here are the comparisons for me:
Old Firmware: 2.05 Th/S pool hash rate, (2.36 from GUI) @ 830W, Average 75C with fan speed at 75%
New Firmware: 2.35 Th/S pool hash rate, (2.4 from GUI) @ 950W, Average 71C with fan speed at 55%
Obviously, I've only been running with the new firmware for a couple hours, but so far, it seems better. I have not done the auto-calibration.
Edit: Added hash rate reported sources.
Thanks for sharing your findings sweeper! Where did you get your wattage readings from? Trying to determine how accurate they are. TIA
May 24, 2018, 01:35:55 PM
It is from awesome miner but when I logged into the miners I saw the exact readings I was getting in awesome miner. Refresh your miner status page fast when you log in to see if you see what I'm seeing.
EDIT: It looks like when logged into the miner they only show average hashrates so when you first log into the miner after booting it you will see the high hashrates but as it averages out you will only see the average hashrate.
EDIT: It looks like when logged into the miner they only show average hashrates so when you first log into the miner after booting it you will see the high hashrates but as it averages out you will only see the average hashrate.
Don't worry about short term swings. Poolside hashrate is what matters and even that can have lots of variance if pool diff is high. Check after you've submitted 1000+ shares to the pool.
May 24, 2018, 01:29:47 PM
EDIT: It looks like when logged into the miner they only show average hashrates so when you first log into the miner after booting it you will see the high hashrates but as it averages out you will only see the average hashrate.
Yes, this average seems correct at Awesome Miner also.
May 24, 2018, 01:16:54 PM
Dear D9 customer,
As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
I just upgraded my firmware on both my miners and now I'm getting some really crazy hash rates. I'm getting anywhere between 1TH/s to 7TH/s As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
is this normal?I also updated the firmware, here are the comparisons for me:
Old Firmware: 2.05 Th/S pool hash rate, (2.36 from GUI) @ 830W, Average 75C with fan speed at 75%
New Firmware: 2.35 Th/S pool hash rate, (2.4 from GUI) @ 950W, Average 71C with fan speed at 55%
Obviously, I've only been running with the new firmware for a couple hours, but so far, it seems better. I have not done the auto-calibration.
Edit: Added hash rate reported sources.
https://image.ibb.co/k7VXWT/mining.jpg
I have not seen a large swing in the GUI-reported hash rates.
I think the picture is from Awesome Miner GUI, which is showing wild swings. Although it shows average also.
EDIT: It looks like when logged into the miner they only show average hashrates so when you first log into the miner after booting it you will see the high hashrates but as it averages out you will only see the average hashrate.
May 24, 2018, 01:09:11 PM
Dear D9 customer,
As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
I just upgraded my firmware on both my miners and now I'm getting some really crazy hash rates. I'm getting anywhere between 1TH/s to 7TH/s As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
is this normal?I also updated the firmware, here are the comparisons for me:
Old Firmware: 2.05 Th/S pool hash rate, (2.36 from GUI) @ 830W, Average 75C with fan speed at 75%
New Firmware: 2.35 Th/S pool hash rate, (2.4 from GUI) @ 950W, Average 71C with fan speed at 55%
Obviously, I've only been running with the new firmware for a couple hours, but so far, it seems better. I have not done the auto-calibration.
Edit: Added hash rate reported sources.
I have not seen a large swing in the GUI-reported hash rates.
I think the picture is from Awesome Miner GUI, which is showing wild swings. Although it shows average also.
May 24, 2018, 01:07:45 PM
Are you seeing crazy hashrates directly from the miners like I am? They are wildly swinging up and down now.
https://image.ibb.co/k7VXWT/mining.jpg
https://image.ibb.co/k7VXWT/mining.jpg
What does your pool show?
https://image.ibb.co/i9xqJ8/miner2.jpg
May 24, 2018, 12:56:32 PM
Dear D9 customer,
As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
I just upgraded my firmware on both my miners and now I'm getting some really crazy hash rates. I'm getting anywhere between 1TH/s to 7TH/s As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
is this normal?I also updated the firmware, here are the comparisons for me:
Old Firmware: 2.05 Th/S pool hash rate, (2.36 from GUI) @ 830W, Average 75C with fan speed at 75%
New Firmware: 2.35 Th/S pool hash rate, (2.4 from GUI) @ 950W, Average 71C with fan speed at 55%
Obviously, I've only been running with the new firmware for a couple hours, but so far, it seems better. I have not done the auto-calibration.
Edit: Added hash rate reported sources.
I have not seen a large swing in the GUI-reported hash rates.
May 24, 2018, 12:53:22 PM
Dear D9 customer,
As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
I just upgraded my firmware on both my miners and now I'm getting some really crazy hash rates. I'm getting anywhere between 1TH/s to 7TH/s As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
is this normal?I also updated the firmware, here are the comparisons for me:
Old Firmware: 2.05 Th/S pool hash rate, (2.36 from GUI) @ 830W, Average 75C with fan speed at 75%
New Firmware: 2.35 Th/S pool hash rate, (2.4 from GUI) @ 950W, Average 71C with fan speed at 55%
Obviously, I've only been running with the new firmware for a couple hours, but so far, it seems better. I have not done the auto-calibration.
Edit: Added hash rate reported sources.
What mode are you running on? Performance, Factory, or Balanced?
May 24, 2018, 12:49:30 PM
Are you seeing crazy hashrates directly from the miners like I am? They are wildly swinging up and down now.
What does your pool show?
May 24, 2018, 12:43:06 PM
i ordered one from china and guess what it burned within one month and i did not get and refund!
May 24, 2018, 12:41:09 PM
Dear D9 customer,
As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
I just upgraded my firmware on both my miners and now I'm getting some really crazy hash rates. I'm getting anywhere between 1TH/s to 7TH/s As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
is this normal?I also updated the firmware, here are the comparisons for me:
Old Firmware: 2.05 Th/S pool hash rate, (2.36 from GUI) @ 830W, Average 75C with fan speed at 75%
New Firmware: 2.35 Th/S pool hash rate, (2.4 from GUI) @ 950W, Average 71C with fan speed at 55%
Obviously, I've only been running with the new firmware for a couple hours, but so far, it seems better. I have not done the auto-calibration.
Edit: Added hash rate reported sources.
https://image.ibb.co/k7VXWT/mining.jpg
May 24, 2018, 12:09:26 PM
I am not buying any ASIC from China. Thank you and goodbye.
Better then obelisk tech. USA company with promises of delivering by end of June. I pre ordered and wish I didn't now that the China beat obelisk by launching much sooner.
It's right there in the post you quoted: https://obelisk.tech/
May 24, 2018, 12:04:57 PM
Dear D9 customer,
As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
I just upgraded my firmware on both my miners and now I'm getting some really crazy hash rates. I'm getting anywhere between 1TH/s to 7TH/s As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
is this normal?I also updated the firmware, here are the comparisons for me:
Old Firmware: 2.05 Th/S pool hash rate, (2.36 from GUI) @ 830W, Average 75C with fan speed at 75%
New Firmware: 2.35 Th/S pool hash rate, (2.4 from GUI) @ 950W, Average 71C with fan speed at 55%
Obviously, I've only been running with the new firmware for a couple hours, but so far, it seems better. I have not done the auto-calibration.
Edit: Added hash rate reported sources.
May 24, 2018, 12:00:23 PM
Dear D9 customer,
As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
I just upgraded my firmware on both my miners and now I'm getting some really crazy hash rates. I'm getting anywhere between 1TH/s to 7TH/s As the difficulty of coin digging grows, to better serve the customers and bring more profits, Innosilicon optimizes the firmware of the D9 miner. After upgrading the firmware, the D9 calculating force can reach 2.4TH/s.
The specific updates are as follows:
http://www.innosilicon.com.cn/download/D9_20180524_071211.swu
is this normal? Jump to: