Topic: 28nm ** 1T ** 900W【JingTian miner】 in production !!! (Read 26317 times)
Great job luke - finally out from under the constraints of the stock firmware.
I'm on course to have some preliminary support in BFGMiner early next week.
Code:
bfgminer version 4.1.0 - Started: [2014-06-07 06:16:54] - [ 0 days 00:04:10]
[M]anage devices [P]ool management [S]ettings [D]isplay options [H]elp [Q]uit
Pool 0: ...ning.eligius.st Diff:512 +Strtm LU:[06:20:52]
Block: ...8bf2d56e #304607 Diff:11.8G (84.16P) Started: [06:20:50]
ST:9 F:0 NB:3 AS:0 BW:[312/ 97 B/s] E:724.18 I: 1.11mBTC/hr BS:94.3k
0 | 0.00/ 0.00/595.8Gh/s | A:150 R:0+0(none) HW:166/.49%
--------------------------------------------------------------------------------
JTN 0: | 0.00/ 0.00/118.2Gh/s | A: 29 R:0+0(none) HW: 49/.70%
JTN 1: | 0.00/ 0.00/124.1Gh/s | A: 22 R:0+0(none) HW: 3/.04%
JTN 2: | 0.00/ 0.00/123.7Gh/s | A: 40 R:0+0(none) HW: 16/.23%
JTN 3: | 0.00/ 0.00/122.6Gh/s | A: 30 R:0+0(none) HW: 10/.14%
JTN 4: | 0.00/ 0.00/124.7Gh/s | A: 31 R:0+0(none) HW: 93/1.3%
The relatively low hashrate is due to the code incompleteness (including changing clocks), it should go at least 2x faster I think. [M]anage devices [P]ool management [S]ettings [D]isplay options [H]elp [Q]uit
Pool 0: ...ning.eligius.st Diff:512 +Strtm LU:[06:20:52]
Block: ...8bf2d56e #304607 Diff:11.8G (84.16P) Started: [06:20:50]
ST:9 F:0 NB:3 AS:0 BW:[312/ 97 B/s] E:724.18 I: 1.11mBTC/hr BS:94.3k
0 | 0.00/ 0.00/595.8Gh/s | A:150 R:0+0(none) HW:166/.49%
--------------------------------------------------------------------------------
JTN 0: | 0.00/ 0.00/118.2Gh/s | A: 29 R:0+0(none) HW: 49/.70%
JTN 1: | 0.00/ 0.00/124.1Gh/s | A: 22 R:0+0(none) HW: 3/.04%
JTN 2: | 0.00/ 0.00/123.7Gh/s | A: 40 R:0+0(none) HW: 16/.23%
JTN 3: | 0.00/ 0.00/122.6Gh/s | A: 30 R:0+0(none) HW: 10/.14%
JTN 4: | 0.00/ 0.00/124.7Gh/s | A: 31 R:0+0(none) HW: 93/1.3%
Well, for what it's worth my unit went off to have a suitable PSU attached by friends of the JTMiner crew and has not been seen since...
This situation continues...Wow... Looks like yours rejoined the cabinets of JT-Miners
Well, for what it's worth my unit went off to have a suitable PSU attached by friends of the JTMiner crew and has not been seen since...
This situation continues... Rank #1 in E-pool. 
Still busy on putting the JTminers into the farm.
Still busy on putting the JTminers into the farm.
How many TH
300T now, and few days later will get to 500T.
Impressive 2million $$ farm there
Theres some PH of These A1 chips miners made in China already. I htink Dragon miners have shipped +1PH already. They seem to ship out 1k miners /week.
No wonder the Chinese mining pool is growing most atm. KNC private pool also...
I don't know exactly numbers of Dragon Miners shipped. They are currently shipping miner with 4 modules (32 a1 chips), and ours are 5 modules (40 chips) and 6 modules (48 chips).
I still have this on my radar as a product to possibly acquire in the near future.
Do we have any other "trusted reviews" or pictures from customers who have placed orders and received this product ?
Do we have any other "trusted reviews" or pictures from customers who have placed orders and received this product ?
OK, enough with the dickriding already !
Rank #1 in E-pool.
Still busy on putting the JTminers into the farm.
Still busy on putting the JTminers into the farm.
How many TH
300T now, and few days later will get to 500T.
Impressive 2million $$ farm there
Theres some PH of These A1 chips miners made in China already. I htink Dragon miners have shipped +1PH already. They seem to ship out 1k miners /week.
No wonder the Chinese mining pool is growing most atm. KNC private pool also...
What I am confused about and maybe it is my ignorance or you alls, but I thought this was about a new product to sell not show off about our farm. Then you all tell us how you alls clone is better than everyone else's.
Am I wrong at guessing since the only few units in the wild came to Sky (who I thought owned the company at first) in the USA. Then ckolivas (sp?) got his to tweek their mcu design in cgminer but his is currently off getting the PSU setup fixed.
I think a lot of people want to know is are you all going to sell anything or just wave your e-peen about a machine you make in your own factory?
Am I wrong at guessing since the only few units in the wild came to Sky (who I thought owned the company at first) in the USA. Then ckolivas (sp?) got his to tweek their mcu design in cgminer but his is currently off getting the PSU setup fixed.
I think a lot of people want to know is are you all going to sell anything or just wave your e-peen about a machine you make in your own factory?
Maybe he's just here to try and stop people buying other miners while he builds his farm. Wouldn't be the first time.
What I am confused about and maybe it is my ignorance or you alls, but I thought this was about a new product to sell not show off about our farm. Then you all tell us how you alls clone is better than everyone else's.
Am I wrong at guessing since the only few units in the wild came to Sky (who I thought owned the company at first) in the USA. Then ckolivas (sp?) got his to tweek their mcu design in cgminer but his is currently off getting the PSU setup fixed.
I think a lot of people want to know is are you all going to sell anything or just wave your e-peen about a machine you make in your own factory?
Am I wrong at guessing since the only few units in the wild came to Sky (who I thought owned the company at first) in the USA. Then ckolivas (sp?) got his to tweek their mcu design in cgminer but his is currently off getting the PSU setup fixed.
I think a lot of people want to know is are you all going to sell anything or just wave your e-peen about a machine you make in your own factory?
Rank #1 in E-pool.
Still busy on putting the JTminers into the farm.
Still busy on putting the JTminers into the farm.
How many TH
300T now, and few days later will get to 500T.
Rank #1 in E-pool.
Still busy on putting the JTminers into the farm.
Still busy on putting the JTminers into the farm.
How many TH
Good for you .
Rank #1 in E-pool.
Still busy on putting the JTminers into the farm.
Still busy on putting the JTminers into the farm.
LOL
How many a1 you can sell me At 55 usd today next day delivery?
I am serious pm me please
Have in mind that you are selling 30 GH chip. I am not buying PDF specs
The price of JTminer is not as high as you think (The price on the website is outdated). We have already made a few deals. If you are a serious and reasonable buyer/distributor, you can drop an email to [email protected] or message skyfromwell for purchase inquires. The price will be dependent on the delivery date, number of units etc.
So you state: "The price of JTminer is not as high as you think (The price on the website is outdated). "
Then I say, correct the website. Alternative would be for you to provide legitimate information for pricing here.
Break it out: like, buy 1 = $xxx buy 2= $xxxx buy 5= $xxxxx buy 10 = $xxxxxxxx . It really isnt that hard.
Using your own words.... "If you are a serious and reasonable" and (to add on) legitimate seller post substantive information.
Stop with the riddles, the story telling, the evasive answers, the innuendo. I have to say that attacking people questioning you does not put you in a good light
nor does it enhance your "TRUST STATUS".
I think you may have missed the boat on sales of your product. Too bad, because at first I thought you might really have something good here.
Proverbs 11:24
One gives freely, yet grows all the richer; another withholds what he should give, and only suffers want.
2 Peter 2:3
And in their greed they will exploit you with false words. Their condemnation from long ago is not idle, and their destruction is not asleep.
i have received last week my BITMINE coincraft DESK 1TH.
In normal mode 1Th
In turbo mode 1.2 Th.
Need new firmware.
If somebody wants it, please PM.
I'm in Italy.
In normal mode 1Th
In turbo mode 1.2 Th.
Need new firmware.
If somebody wants it, please PM.
I'm in Italy.
LOL
How many a1 you can sell me At 55 usd today next day delivery?
I am serious pm me please
Have in mind that you are selling 30 GH chip. I am not buying PDF specs
The price of JTminer is not as high as you think (The price on the website is outdated). We have already made a few deals. If you are a serious and reasonable buyer/distributor, you can drop an email to [email protected] or message skyfromwell for purchase inquires. The price will be dependent on the delivery date, number of units etc.
More over bitfury gen 2 and avalon gen 3 are coming
I have said it many times if I get ready to mine machine for X usd I expect to be able to get chips for 30% of that price. If all of the above sounds reasonable pm me
LOL
How many a1 you can sell me At 55 usd today next day delivery?
I am serious pm me please
Have in mind that you are selling 30 GH chip. I am not buying PDF specs
The price of JTminer is not as high as you think (The price on the website is outdated). We have already made a few deals. If you are a serious and reasonable buyer/distributor, you can drop an email to [email protected] or message skyfromwell for purchase inquires. The price will be dependent on the delivery date, number of units etc.
Bitmain and their Ants are definitely what all vendors should be aspiring to; good price performance and 100% legal. It goes to show that not all Chinese companies are the same and that one should be vigilant against companies like JT, JianTian, Dragon, etc who have no qualms with using stolen technology in their products.
Frankly I don't see any reason why anyone would want to purchase anything based on the A1 as currently it simply isn't a competitive option.
Frankly I don't see any reason why anyone would want to purchase anything based on the A1 as currently it simply isn't a competitive option.
Sir, may you please remove yourself from this thread?
You´ve made your claims, multiple times now, and since it´s quite obvious that you don´t have a clue how patent/copyright works in the REAL WORLD you´re just making a fool out of yourself.
Innosilicon is a respectable company.
What a FUD. They stole their product, reproduced it. Not the first time, not the last.
I you have a innovative BRAND NEW product, you NEVER go to China producing it. Thats a rule, American and European producers learned in the last decade, because they just steal and copy it!
Cointerra, Hashfast no way producing in China. BFL produced his first 60mn chip in China, which was immediately stolen and reproduced by Avalon. Ok, maybe you are in China RESPECTABLE if you STEAL A PRODUCT make alot of MONEY and anyone think of you that you are respectable. BUT THATS A FUD
Get your fact right before open your big mouth.
A1 chips ARE NOT PRODUCED in China. It is produced in GP facility in Germany.
It is designed by a Chinese chip design company with their own IPs. It signed a partnership with Bitmine with Bitmine paying for part of costs. As return Bitmine can have 100K of chips in cost price and can market as their own brand name.
Now Bitmine sold or used all those chips already. As a new agreement, Bitmine can only sell system not chips now.
As for respectable company, KNC also have their chips designed by a Chinese chip design company headquartered in Taibei.
So I wish them good luck with deployment of such big amount of chips in hand collecting dust
Ps it is off topic pls excuse me
Just talked with Dr. Zhang (you know who he is, LOL), his chips come out 2 weeks with 82 RMB per chip. That is same as A1 chip in $55. The second one at 6 weeks is cheaper, but not really a big threat as you saying.
Also someone boasts Antminer's 1T system before. I also talked with their CEO Li, it is not very cheap at $3899.
How many a1 you can sell me At 55 usd today next day delivery?
I am serious pm me please
Have in mind that you are selling 30 GH chip. I am not buying PDF specs
Jump to: