Topic: [350 GH/s] "Eligius" (experimental) pool: almost feeless PPS, hoppers welcome - page 13. (Read 116997 times)
June 12, 2011, 11:16:12 PM
The current code is very inefficient at generating work, so on long rounds it can take a number of seconds to return new work. I'm currently working on a new version to optimize it.
June 12, 2011, 11:11:11 PM
I get the idle notification with phoenix every once in a while, but less than a second later I've already submitted work and had it accepted....
Not sure why. Maybe it's something flakey with phoenix? It doesn't seem to affect my overall hashrate, though.
I have a feeling it's probably a combination of the miner AND the pool and how it responds (or how quickly) it responds with work requests. I bet you anything slush is on a much beefier connection with lower latency than Eligius US so that may explain it.
Ohwell, I guess as long as the overall hashrate is not affected too much then it's all good.
June 12, 2011, 10:30:00 PM
I get the idle notification with phoenix every once in a while, but less than a second later I've already submitted work and had it accepted....
Not sure why. Maybe it's something flakey with phoenix? It doesn't seem to affect my overall hashrate, though.
June 12, 2011, 09:34:55 PM
Hey guys, anyone else but me get the occasional "warning: work queue empty, miner is idle"..when mining with phoenix ?
I'm using pheonix 1.48 aggression 12
Never had this issue with slush so far...
I'm using pheonix 1.48 aggression 12
Never had this issue with slush so far...
June 12, 2011, 08:06:37 PM
I just moved to this pool from btcmine, hope it goes well 
I'm sure it will!
St. Eligius is the easiest pool to get running on. There's a hiccup now and then - but no worse than Slush and Deepbit going batty.
On average, I've got about 6 coins in 6 days with an average of somewhere near 350MHs (I think, not including downtime). I usually do burn-in and other tests on St. Eligius, so that 6 days includes roughly 2 whole days of downtime when I was tweaking/refitting cards in one of my miners.
June 12, 2011, 07:18:45 PM
I just moved to this pool from btcmine, hope it goes well
June 12, 2011, 01:57:55 PM
14izmnuABRaeZXX361yvG6RahNoiBZ28uw
I am receiving no bitcoin for mining in this pool since June 8th.
I ran a miner all night (14+ hours) and it says that my 3 hour average is 0.00 Khashes/sec and the pool says that I have submitted nothing since June 8th.
http://eligius.st/~artefact2/eu/14izmnuABRaeZXX361yvG6RahNoiBZ28uw I am receiving no bitcoin for mining in this pool since June 8th.
I ran a miner all night (14+ hours) and it says that my 3 hour average is 0.00 Khashes/sec and the pool says that I have submitted nothing since June 8th.
June 12, 2011, 01:50:08 PM
14izmnuABRaeZXX361yvG6RahNoiBZ28uw
I am receiving no bitcoin for mining in this pool since June 8th.
I ran a miner all night (14+ hours) and it says that my 3 hour average is 0.00 Khashes/sec and the pool says that I have submitted nothing since June 8th.
Any help?
I am receiving no bitcoin for mining in this pool since June 8th.
I ran a miner all night (14+ hours) and it says that my 3 hour average is 0.00 Khashes/sec and the pool says that I have submitted nothing since June 8th.
Any help?
June 12, 2011, 12:06:00 PM
Thanks, Artefact. That sounds great!
The new graphs look good and are a lot easier to read, I think. Thanks for spiffing the up, too.
June 12, 2011, 09:17:45 AM
OK then. Personally I did find it more readable when it was only showing a few days worth, as it was until today sometime because I hadn't been going a full week. Now it shows several days of blank space before I started which it didn't before. Just using thinner lines would even do the trick actually since I can zoom in with the browser.
June 12, 2011, 07:56:52 AM
I notice that the time scale of the second (hashrate) graph has changed, used to go back to when I joined eligius a few days ago and now it's a full week, which makes it a bit harder to follow intraday trends because it's so cramped. Maybe it always showed a week worth of data when you'd been on the pool that long, but what about either a)giving a dropdown menu for time scale with a few options from e.g. 12 hours to 2 weeks, or b)skipping the control and adding a third graph showing hashrate over the last 24 hours?
No, sorry. It has always been one week. And the averages are supposed to help you read interesting data.
June 12, 2011, 06:05:24 AM
I notice that the time scale of the second (hashrate) graph has changed, used to go back to when I joined eligius a few days ago and now it's a full week, which makes it a bit harder to follow intraday trends because it's so cramped. Maybe it always showed a week worth of data when you'd been on the pool that long, but what about either a)giving a dropdown menu for time scale with a few options from e.g. 12 hours to 2 weeks, or b)skipping the control and adding a third graph showing hashrate over the last 24 hours?
June 12, 2011, 04:42:32 AM
Someone's changing my graphs!
Artefact - I dunno if this is technically possible, but is there any way to have a payout counter? At minimum, something like "6 payouts today" or ideally one that listed out the payout and the amount?
And by payout I mean block generation, not > 1.0BTC payout.
Do you mean something like Deepbit or Slush's pages ?
Yes, it's planned.
June 12, 2011, 03:55:14 AM
Someone's changing my graphs!
Artefact - I dunno if this is technically possible, but is there any way to have a payout counter? At minimum, something like "6 payouts today" or ideally one that listed out the payout and the amount?
And by payout I mean block generation, not > 1.0BTC payout.
June 10, 2011, 06:09:44 PM
The pools are working. The share stats are just unavailable for a few hours, sorry!
Anybody else having trouble with their stats page? It says I haven't submitted a block in the last 3 hours, but I know I have...
Ran them all night, woke up to see 0 change. Switched to BPM until things are resolved.
Now that's just wrong. Do you understand what the estimate means ? It's not likely to change much until the pool finds a block, so that's to be expected.
I do understand what an estimate means, but when I see the pool giving my machine work all night, and when I check the stats to see "0 work done," I move along in my queue of pools, then when those aren't suiting my tastes, they go on the list of pools to try out again. I'll prolly give them a shot again later tonight. Depends on how I feel BPM is performing for me.
Overall, I just want to write a queue swapper to even my odds on pools.
June 10, 2011, 02:45:57 PM
Anybody else having trouble with their stats page? It says I haven't submitted a block in the last 3 hours, but I know I have...
The pools are working. The share stats are just unavailable for a few hours, sorry!
Anybody else having trouble with their stats page? It says I haven't submitted a block in the last 3 hours, but I know I have...
Ran them all night, woke up to see 0 change. Switched to BPM until things are resolved.
Now that's just wrong. Do you understand what the estimate means ? It's not likely to change much until the pool finds a block, so that's to be expected.
June 10, 2011, 02:20:01 PM
Anybody else having trouble with their stats page? It says I haven't submitted a block in the last 3 hours, but I know I have...
Ran them all night, woke up to see 0 change. Switched to BPM until things are resolved.
June 10, 2011, 01:28:54 PM
Anybody else having trouble with their stats page? It says I haven't submitted a block in the last 3 hours, but I know I have...
June 10, 2011, 03:03:20 AM
Invalid block on eu?
Yeah, that sucks. At least it was the 2nd today...I just came here to report such an effect (picture below), however, if a block was found yet invalid, things start to fit together, and this could actually be what is supposed to happen on the graphs.
June 09, 2011, 07:41:27 PM
Yeah, it's been slow on the EU server.
Jump to: