Topic: [9 TH] Bitparking Pool, DGM 0%,vardiff,stratum,Merge Mining - page 25. (Read 163780 times)

How about you finish refunding people who had money I your exchange?

Hi All,
   I have a little bit of a concern with this pool when it comes to its future. was wondering if someone can help me out. i might be wrong but just thought id raise it. I've only been mining with this pool for a few weeks and so far i like it quite alot, getting paid for multiple coins and only hashing one is extremely awesome.
 now i know that very soon (in the next coming months) there are TH's getting added to the network (KNC, Avalon etc). Now because of this pool isn't a very big pool in comparison to other pools (BTC guild etc) when this extra hashrate comes online is this pool going to be so low in hashrate that it wont be solving blocks for days?. I really hope this pool survives the big inrush of hash and i hope a few people in this pool also have orders.

just wanted to know, anyone got stuff on order?, is this pool going to stay alive?

Ill be adding stuff when it comes, really hope this pool keeps alive

Thanks,
Brendan.

I switch back yesterday and it looks OK now... So if you did something it works...

I can temporarily disable i0coin and groupcoin generation which I added around August 6 and see if that makes a difference. If you can confirm that you're still mining and can check if disconnections still occur I'll make the change and see if it affects it.

yes i had also the same problems many messages about not seeing the pool, switched my miners to other pool

any way we can change the percentage we get from the merge? say i want more of a certain coin then other.

Slovenia

Deposits of alt coins to vircurex seem to be not working. If you are mining alt coins with a vircurex address you might want to avoid withdrawing until the situation is resolved.

It's not hours that defines whether a round is longer than usual, it's the number of shares compared to difficulty. At the moment we're about 2.5x difficulty which is nothing extreme. There have been 10x difficulty rounds before! The only cure for long round times in terms of hours is higher hash rate.

It depends how many shares are found by others during the time you're offline. You'll still discharge over time in other blocks that matches up with your charge rate. Discharging takes quite a few blocks IIRC.

Where are you based (What country)?

30+ hour rounds  

@doublec - What is the reason the gap for when you stop mining and your expected payout starts to decline is so short? It seems almost instant. Every once and a while I have computer/block erupter trouble that I usually fix within 10 minutes or so but by that time I notice I already have started to lose estimated payout (and much faster than at the rate it took to "charge up").

I can give you access to my miner if that will help... You can probably use sniffer...

EDIT: Could that be it?

Pinging mmpool.bitparking.com [206.71.179.116] with 32 bytes of data:
Reply from 206.71.179.116: bytes=32 time=3170ms TTL=45
Reply from 206.71.179.116: bytes=32 time=2945ms TTL=45
Reply from 206.71.179.116: bytes=32 time=3106ms TTL=45
Reply from 206.71.179.116: bytes=32 time=3103ms TTL=45

Ping statistics for 206.71.179.116:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 2945ms, Maximum = 3170ms, Average = 3081ms

I have much less hire:

Pinging eu-stratum.btcguild.com [95.211.218.9] with 32 bytes of data:
Reply from 95.211.218.9: bytes=32 time=1087ms TTL=51
Reply from 95.211.218.9: bytes=32 time=1107ms TTL=51
Reply from 95.211.218.9: bytes=32 time=1409ms TTL=51
Reply from 95.211.218.9: bytes=32 time=1298ms TTL=51

Ping statistics for 95.211.218.9:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 1087ms, Maximum = 1409ms, Average = 1225ms

Something wrong with international lines???

Local:
Pinging www.siol.net [89.143.249.230] with 32 bytes of data:
Reply from 89.143.249.230: bytes=32 time=290ms TTL=57
Reply from 89.143.249.230: bytes=32 time=151ms TTL=57
Reply from 89.143.249.230: bytes=32 time=333ms TTL=57
Reply from 89.143.249.230: bytes=32 time=189ms TTL=57

Ping statistics for 89.143.249.230:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 151ms, Maximum = 333ms, Average = 240ms

"-D -P" works for me on cgminer v3.3.1 on 64bit Linux. Maybe it's a Windows thing. I'll continue to look into the disconnect issue but it's difficult without being able to reproduce.

It looks like CGminer bug. I use cgminer-nogpu and it crashes... And I tested on 3.1.1 and 3.3.1. But to get any help from CGminer team is from my experience mission impossible...

EDIT: I did that on 3 different computer so I don't think it is anything wrong with all of them...

If you can solve the -D/-P problem and get logs it will be helpful otherwise there's not much I can do.

I know that he has this problem too...

I can give you access to this miner if that will help. But for some resone I can't run -D

I'm not getting them. Is anyone else getting disconnects?

Since I don't get the anser I did this little test:

 [2013-08-21 13:52:48] Accepted 1941e03b Diff 10/4 BAJ 0 pool 1
 [2013-08-21 13:52:49] Switching to pool 0 http://mmpool.bitparking.com:3333
 [2013-08-21 13:52:50] Accepted 3f8aa022 Diff 4/4 BAJ 0 pool 1
 [2013-08-21 13:52:52] Accepted 1f0a74b4 Diff 8/4 BAJ 0 pool 1
 [2013-08-21 13:52:55] Accepted 32b3d7f2 Diff 5/4 BAJ 0 pool 1
 [2013-08-21 13:52:59] Accepted 02d5b3a4 Diff 90/4 BAJ 0 pool 1
 [2013-08-21 13:52:59] Accepted 1db23719 Diff 8/4 BAJ 0 pool 1
 [2013-08-21 13:53:03] Pool 0 difficulty changed to 4
 [2013-08-21 13:53:28] Accepted 2be49ea8 Diff 5/4 BAJ 0 pool 0
 [2013-08-21 13:53:29] Stratum connection to pool 0 interrupted
 [2013-08-21 13:53:29] Lost 4 shares due to stratum disconnect on pool 0
 [2013-08-21 13:53:36] Pool 0 difficulty changed to 4
 [2013-08-21 13:53:46] Accepted 2bac4edc Diff 5/4 BAJ 0 pool 0
 [2013-08-21 13:53:47] Stratum connection to pool 0 interrupted
 [2013-08-21 13:53:47] Lost 2 shares due to stratum disconnect on pool 0
 [2013-08-21 13:53:49] Pool 0 stratum share submission failure
 [2013-08-21 13:53:52] Pool 0 difficulty changed to 4
 [2013-08-21 13:53:54] Pool 0 communication resumed, submitting work
 [2013-08-21 13:53:55] Accepted 063ce527 Diff 41/4 BAJ 0 pool 0
 [2013-08-21 13:53:58] Accepted 04dd2fb8 Diff 52/16 BAJ 0 pool 4
 [2013-08-21 13:53:59] Accepted 1ac1b12f Diff 9/4 BAJ 0 pool 0
 [2013-08-21 13:54:01] Accepted 1d609265 Diff 8/4 BAJ 0 pool 0

And moments later...

 [2013-08-21 13:55:12] Accepted 1508e4be Diff 12/4 BAJ 0 pool 0
 [2013-08-21 13:55:13] Stratum connection to pool 0 interrupted
 [2013-08-21 13:55:13] Lost 1 shares due to stratum disconnect on pool 0
 [2013-08-21 13:55:16] Pool 0 difficulty changed to 4
 [2013-08-21 13:55:22] Accepted 2c493731 Diff 5/4 BAJ 0 pool 0
 [2013-08-21 13:55:22] Accepted 0bcb2f0b Diff 21/4 BAJ 0 pool 0
 [2013-08-21 13:55:25] Accepted 10a8dd74 Diff 15/4 BAJ 0 pool 0
 [2013-08-21 13:55:29] Accepted 25c08a86 Diff 6/4 BAJ 0 pool 0
 [2013-08-21 13:55:32] Accepted 1b5ed519 Diff 9/4 BAJ 0 pool 0
 [2013-08-21 13:55:33] Switching to pool 1 http://eu-stratum.btcguild.com:3333
 [2013-08-21 13:55:33] Accepted 2fca86be Diff 5/4 BAJ 0 pool 0
 [2013-08-21 13:55:34] Accepted 3af7d583 Diff 4/4 BAJ 0 pool 0
 [2013-08-21 13:55:34] Pool 1 difficulty changed to 4
 [2013-08-21 13:55:34] Stratum from pool 1 requested work restart
 [2013-08-21 13:55:35] Accepted 1b54ef26 Diff 9/4 BAJ 0 pool 0
 [2013-08-21 13:55:39] Pool 1 communication resumed, submitting work

This can't be normal...

And this is happening to USB ASIC and FPGA

 [2013-08-21 13:54:00] Accepted 46d962aa Diff 3/2 ICA 4 pool 0
 [2013-08-21 13:54:01] Stratum connection to pool 0 interrupted
 [2013-08-21 13:54:01] Lost 3 shares due to stratum disconnect on pool 0
 [2013-08-21 13:54:07] ICA5: invalid nonce - HW error
 [2013-08-21 13:54:07] MMQ0: invalid nonce - HW error
 [2013-08-21 13:54:07] MMQ0: Set clock speed down to 202
 [2013-08-21 13:54:07] MMQ0: invalid nonce - HW error
 [2013-08-21 13:54:09] Accepted 07036734 Diff 36/2 MMQ 3 pool 0
 [2013-08-21 13:54:12] MMQ3: Set clock speed up to 208
 [2013-08-21 13:54:12] Accepted 0a3fb41f Diff 24/2 ICA 1 pool 0
 [2013-08-21 13:54:14] Accepted 78c7a1d5 Diff 2/2 ICA 5 pool 0
 [2013-08-21 13:54:14] Icarus 3 Re-estimate: Hs=2.149234e-009 W=6.960975e-001 read_count=98 fullnonce=9.927s
 [2013-08-21 13:54:14] ICA3: Comms error
 [2013-08-21 13:54:14] Failed to open Icarus on //./COM10
 [2013-08-21 13:54:14] ICA3: Comms error
 [2013-08-21 13:54:14] ICA 3 failure, disabling!
 [2013-08-21 13:54:14] Thread 3 being disabled
 [2013-08-21 13:54:14] ICA4: Comms error
 [2013-08-21 13:54:14] Failed to open Icarus on //./COM11
 [2013-08-21 13:54:14] ICA4: Comms error
 [2013-08-21 13:54:14] ICA 4 failure, disabling!
 [2013-08-21 13:54:14] Thread 4 being disabled
 [2013-08-21 13:54:27] Icarus 1 Re-estimate: Hs=2.976334e-009 W=6.036714e-003 read_count=126 fullnonce=12.789s
 [2013-08-21 13:54:39] Icarus 0 Re-estimate: Hs=8.292371e-010 W=1.061287e+000 read_count=45 fullnonce=4.623s
 [2013-08-21 13:54:39] Accepted 4bb78760 Diff 3/2 ICA 0 pool 0

They don't like disconnects... FPGA is downclocking and ACIS are crashing...

I would really like to use this pool but I can't till this gets fixed... This is happening only hire...