Agilmine - Your REAL Altcoin FPGA miner [Updated! 8/16] - page 3.

arm_race

jr. member

Activity: 148

Merit: 9

Contact [email protected] for our FPGA miner info!

It was nice talking to you. glad that we have worked out the configuration issue.
yes. xdag miner software is just a hackup version of the PC wallet, eventually our plan to merge them all to an integrated PC/Linux host software, and release for open source.

thanks.

Quote from: philipma1957 on August 26, 2018, 08:46:40 PM

Okay after some struggle I got it set up with op's help and running on this pool

http://corpopool.com/

http://xdagger.corpopool.com/

https://xdag.io/

This is more crude and need more development. op has said he is working on it.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Okay after some struggle I got it set up with op's help and running on this pool

http://corpopool.com/

http://xdagger.corpopool.com/

https://xdag.io/

This is more crude and need more development. op has said he is working on it.

arm_race

jr. member

Activity: 148

Merit: 9

Contact [email protected] for our FPGA miner info!

Quote from: philipma1957 on August 26, 2018, 01:45:49 PM

Quote from: arm_race on August 26, 2018, 01:38:42 PM

Quote from: philipma1957 on August 26, 2018, 01:07:03 PM

I thought I bricked it,but it is working on old algo.

Some how the install of flashpro polarfire did not work.

I will delete it and install it again.

I think it is not that easy to brick
can the device be recognized by the programmer as showed in the screenshot i sent you? and does the "ping" test work? we can chat offline to figure this out. let me know what i can help

still works on old algo.

when I load flashpro second time it came up but your screens do not match the screens it shows me. I will be busy until six or 7 pm est time but after 7pm eastern time we can talk on the phone. I will email a phone number to you.

sure thing, we will figure it out. Thanks!

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: arm_race on August 26, 2018, 01:38:42 PM

Quote from: philipma1957 on August 26, 2018, 01:07:03 PM

I thought I bricked it,but it is working on old algo.

Some how the install of flashpro polarfire did not work.

I will delete it and install it again.

I think it is not that easy to brick
can the device be recognized by the programmer as showed in the screenshot i sent you? and does the "ping" test work? we can chat offline to figure this out. let me know what i can help

still works on old algo.

when I load flashpro second time it came up but your screens do not match the screens it shows me. I will be busy until six or 7 pm est time but after 7pm eastern time we can talk on the phone. I will email a phone number to you.

arm_race

jr. member

Activity: 148

Merit: 9

Contact [email protected] for our FPGA miner info!

Quote from: philipma1957 on August 26, 2018, 01:07:03 PM

I thought I bricked it,but it is working on old algo.

Some how the install of flashpro polarfire did not work.

I will delete it and install it again.

I think it is not that easy to brick
can the device be recognized by the programmer as showed in the screenshot i sent you? and does the "ping" test work? we can chat offline to figure this out. let me know what i can help

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

I thought I bricked it,but it is working on old algo.

Some how the install of flashpro polarfire did not work.

I will delete it and install it again.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: Elder III on August 25, 2018, 10:40:48 PM

Thanks for the video Phil, I'll be keeping an eye on the development and testing if this nifty little bugger.

I am working on next algo will post sometime later today..

I am installing flashpro polarfire

this should let me program a different algo to the fpga

Elder III

sr. member

Activity: 1246

Merit: 274

Thanks for the video Phil, I'll be keeping an eye on the development and testing if this nifty little bugger.

miki_cba

newbie

Activity: 3

Merit: 0

nice nicee!! please do not forget people from other countries Grin

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: arm_race on August 25, 2018, 03:44:06 PM

Thank you for the good video! Cheesy

Let me know if you have trouble programming the fpga for other algo!

Quote from: philipma1957 on August 25, 2018, 01:54:21 PM

Did a 9 minute video on you tube

will post link soon.

Your video will be live at: https://youtu.be/Yle13b1kgWo

should be ready in 10 minutes.

i EARNED ABOUT 4 crea

https://chainz.cryptoid.info/crea/address.dws?CUuANV58HNTcjHgu6LhiRSqvt5GTbRTs6Q.htm

i WILL DO NEXT ALGO shortly.

I will have it running soon. Maybe tonight surely Sun morning.

arm_race

jr. member

Activity: 148

Merit: 9

Contact [email protected] for our FPGA miner info!

Thank you for the good video! Cheesy

Let me know if you have trouble programming the fpga for other algo!

Quote from: philipma1957 on August 25, 2018, 01:54:21 PM

Did a 9 minute video on you tube

will post link soon.

Your video will be live at: https://youtu.be/Yle13b1kgWo

should be ready in 10 minutes.

i EARNED ABOUT 4 crea

https://chainz.cryptoid.info/crea/address.dws?CUuANV58HNTcjHgu6LhiRSqvt5GTbRTs6Q.htm

i WILL DO NEXT ALGO shortly.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Did a 9 minute video on you tube

will post link soon.

Your video will be live at: https://youtu.be/Yle13b1kgWo

should be ready in 10 minutes.

i EARNED ABOUT 4 crea

https://chainz.cryptoid.info/crea/address.dws?CUuANV58HNTcjHgu6LhiRSqvt5GTbRTs6Q.htm

i WILL DO NEXT ALGO shortly.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: arm_race on August 24, 2018, 07:59:35 PM

great, i will send you some instructions on how to re-program the fpga, hopefully there is no driver issue this time, i want to make sure first.
next time we can try XDAG.

Quote from: philipma1957 on August 24, 2018, 07:10:58 PM

I am going to make an address for crea and mine to it for 24 hours then try another algo .

pm me what algos you have available.

this is a new address for crea

CUuANV58HNTcjHgu6LhiRSqvt5GTbRTs6Q

http://creapool.club/workers

the address can be looked up at link

the pool calculator says I would earn about 50 cents a day.
this gear on the brick uses 35 watt x 24 hours = 840 or .84 kwatts that is 8.4 cents and you earn 50 cents so you clear 50 -9 = 41 cents that is 145 a year not the best for roi. but not a power hog.

I will take photos etc very soon.

okay send them to me and I will try to setup on sat

arm_race

jr. member

Activity: 148

Merit: 9

Contact [email protected] for our FPGA miner info!

great, i will send you some instructions on how to re-program the fpga, hopefully there is no driver issue this time, i want to make sure first.
next time we can try XDAG.

Quote from: philipma1957 on August 24, 2018, 07:10:58 PM

I am going to make an address for crea and mine to it for 24 hours then try another algo .

pm me what algos you have available.

this is a new address for crea

CUuANV58HNTcjHgu6LhiRSqvt5GTbRTs6Q

http://creapool.club/workers

the address can be looked up at link

the pool calculator says I would earn about 50 cents a day.
this gear on the brick uses 35 watt x 24 hours = 840 or .84 kwatts that is 8.4 cents and you earn 50 cents so you clear 50 -9 = 41 cents that is 145 a year not the best for roi. but not a power hog.

I will take photos etc very soon.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

I am going to make an address for crea and mine to it for 24 hours then try another algo .

pm me what algos you have available.

this is a new address for crea

CUuANV58HNTcjHgu6LhiRSqvt5GTbRTs6Q

http://creapool.club/workers

the address can be looked up at link

the pool calculator says I would earn about 50 cents a day.
this gear on the brick uses 35 watt x 24 hours = 840 or .84 kwatts that is 8.4 cents and you earn 50 cents so you clear 50 -9 = 41 cents that is 145 a year not the best for roi. but not a power hog.

I will take photos etc very soon.

arm_race

jr. member

Activity: 148

Merit: 9

Contact [email protected] for our FPGA miner info!

Quote from: philipma1957 on August 24, 2018, 05:39:39 PM

I do not know about roi.

But I know one thing drivers are loaded and I should get test done soon Grin

now on the low end brick I am mining crea coin pulling 33.6 watts

awesome you got it working.
yes that's possible, i haven't measured power from that adapter..
the hash rate should stay at 1Gh/s
anything else you want to test with?

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

I do not know about roi.

But I know one thing drivers are loaded and I should get test done soon Grin

now on the low end brick I am mining crea coin pulling 33.6 watts

arm_race

jr. member

Activity: 148

Merit: 9

Contact [email protected] for our FPGA miner info!

Quote from: xs.over on August 24, 2018, 11:10:29 AM

Useless thing in terms of ROI.
Nowadays is mainly only hardware manufacturers earn money in crypto mining sphere

If mining on these devices was profitable, then you would mine privately yourself using them, instead of trying to find customers who aren't a very familiar with math. I didn't mean to offend anyone.

there are already many people doing that, secretly, believe me, but my purpose is to build an affordable product that everyone has access to. besides, it is quite a hassle to build a farm, i enjoy more building a product.

if everyone just keep everything to him/herself (or a small group), what is the whole point of cryptocurrency?

xs.over

full member

Activity: 376

Merit: 103

Useless thing in terms of ROI.
Nowadays is mainly only hardware manufacturers earn money in crypto mining sphere

If mining on these devices was profitable, then you would mine privately yourself using them, instead of trying to find customers who aren't a very familiar with math. I didn't mean to offend anyone.

ruplikminer

jr. member

Activity: 504

Merit: 3

Quote from: philipma1957 on August 21, 2018, 08:58:05 PM

ups says it comes on the 23rd. if it does use 25 watts that is only 600 a day. which is only 18 kwatts a month at 10 cents that is 1.80 a month for power

the 1070ti is 150 watts or 21.60 a month for power. at 20 cents.

I pointed 2 1050ti's at nicehash to mine keccak they do 600 mh my rig pulls 188 watts that means about 5 kwatts

at 10 cents = 50 cents on power I earn 15 cents = 35 cents in the hole.

add this 2 fpga watts go to 238 = 6 kwatts maybe 7 hash is 2600 I earn 65 cents with the two gpus and 2 fpgas

I spend about 60 cents so I make a 5 cent profit.

or better yet point them to cn7

the gpus alone use 50 cents power and earn 34 cents mining loss of 16 cents

the 2 fpgas earn 50 cents
the 2 gpus earn 34 cents

you spend 60 cents at 10 cent power

you make 24 cents a day.

point the 2 1050tis at eth

the gpus alone use 50 cents earn 49 cents loss of 1 cent

2 fpgas earn 50 cents cost about 10 cents
2 gpus earn 49 cents cost about 50 cents

rig makes 39 cents a day. is it a lot no but a dead rig at 10 cent power becomes an earner.

do I think I want 100 fpgas no but a few yes I do.

So I am will to help out.

Very interesting. It would be also interesting to compare price/profit/powerusage-cost with the bcu1525

Topic: Agilmine - Your REAL Altcoin FPGA miner [Updated! 8/16] - page 3. (Read 5297 times)