No effect on ASUS TURBO GTX 1080 Ti as many have said already.
The "RevA" thing does not fix it.
This card: https://www.techpowerup.com/gpudb/b4307/asus-turbo-gtx-1080-ti
Topic: [ANN] [1080 | 1080TI] ETHlargement - The Hashrate Hardener - page 31. (Read 59577 times)
To encourage the developers I sent some Zcash.
Follow my example to reward this good work.
Follow my example to reward this good work.
Same here :-)... this team deserved some donations...
asus 1080 ti rog strix stabil
54 mh/s
65%/0/+680
54 mh/s
65%/0/+680
I tested ethlargement today if anyone is interested in a 3rd party review
https://youtu.be/NnOdrA1bCM4
https://youtu.be/NnOdrA1bCM4
On my EVGA 1080ti FTW3, one of the sensors reaches over 70 degree, I think it stabilized around 73 but then I closed the miner.
Actually they were 2 sensors at the same point but in different sides of the GPU, one sensor for the memory and one for the power, but my guess is that the power-related component is being overheated and causes the memory next to it to heat as well.
The same problem exists with some Neoscrypt and Equihash miners as well, so it's not just ETHlargement, it might be something with all the 1080TIs or just this specific EVGA's edition.
BTW, is there any way to deactivate the effect of the "pill" without restarting the PC? Just closing the console doesn't seem to change anything.
PS: Where are my miners! Your tool works great at increasing the hashrate, thanks! I just hope it doesn't have a trojan in but I'm not keeping anything worth stealing anyway.
Actually they were 2 sensors at the same point but in different sides of the GPU, one sensor for the memory and one for the power, but my guess is that the power-related component is being overheated and causes the memory next to it to heat as well.
The same problem exists with some Neoscrypt and Equihash miners as well, so it's not just ETHlargement, it might be something with all the 1080TIs or just this specific EVGA's edition.
BTW, is there any way to deactivate the effect of the "pill" without restarting the PC? Just closing the console doesn't seem to change anything.
PS: Where are my miners! Your tool works great at increasing the hashrate, thanks! I just hope it doesn't have a trojan in but I'm not keeping anything worth stealing anyway.
No temp probs on my EVGA 1080ti SC I'd recommend using a custom fan curve in afterburner or set a higher static fan speed. And add environmental air circulation.
The pill effects seem to hang around for a few minutes before disappearing on my rigs ymmv.
To encourage the developers I sent some Zcash.
Follow my example to reward this good work.
Follow my example to reward this good work.
what about vega timing
P104 already HAVE tweaked memory timings that match this tweak!
just compare the speed, nvidia from start tweaked P104 bios memory so it have faster timings, with this tweak tool you just adjust gaming 1080/ti to tweaks used in P104/102
What I would like to see a tool which can accept configured timing for all pascal GPU-s so we ca play some as AMD freaks do!
just compare the speed, nvidia from start tweaked P104 bios memory so it have faster timings, with this tweak tool you just adjust gaming 1080/ti to tweaks used in P104/102
What I would like to see a tool which can accept configured timing for all pascal GPU-s so we ca play some as AMD freaks do!
Excellent work, getting 51~55mh/s on all my 1080Tis with power usage generally around 66~70% per card
do you mean that "program already tells it works with 1080/1080ti"?
If so, yes i can read.
since P104 is also with GDDR5X i just tried and give feedback.
The program is limited to 1080, 1080 Ti and Titan Xp. Whatever else card you have - it won't work, this is intended. P100 cards won't work, any other GTX cards won't work, Radeon cards won't work. 1080, 1080 Ti and Titan XP. Only. Nothing else. Clear and simple. If so, yes i can read.
since P104 is also with GDDR5X i just tried and give feedback.
p104 is gtx1070 with pci bus bandwidth improved by driver ... this kind of software will not improve your hashrate at all. ( maybe a little 
)
)Now go back and read what the program says in your screenshot.
do you mean that "program already tells it works with 1080/1080ti"?If so, yes i can read.
since P104 is also with GDDR5X i just tried and give feedback.
Also in this article they said it is possible.
http://1stminingrig.com/gtx-1080-and-gtx-1080ti-hashrate-increase-up-to-55-mh-s-on-ethereum-ethash
Quote
It is thought that the tool changes RRD & FAW values (timings). Some users allegedly have made the same tweaks to p102 and p104 mining edition cards through other means. Moreover, there is a chance that the two mentioned card models won’t work with this specific tool.
The P104 is essentially a 1080 with improved GDDRx5 timings (for mining). The app basically does what the manufacturers did for the P104 out of the box. From the screenshot you posted it seems you already have 40 Mh on the GPU. 1080 owners say they got at most 38-39 with the Enlargement Pill- so you are doing better already.
I don't care too much about the boost of 1080 or 1080 Ti Eth mining efficiency, but I like the tone of the original post so much. Kudos!
Now go back and read what the program says in your screenshot.
do you mean that "program already tells it works with 1080/1080ti"?If so, yes i can read.
since P104 is also with GDDR5X i just tried and give feedback.
Also in this article they said it is possible.
http://1stminingrig.com/gtx-1080-and-gtx-1080ti-hashrate-increase-up-to-55-mh-s-on-ethereum-ethash
Quote
It is thought that the tool changes RRD & FAW values (timings). Some users allegedly have made the same tweaks to p102 and p104 mining edition cards through other means. Moreover, there is a chance that the two mentioned card models won’t work with this specific tool.
Now go back and read what the program says in your screenshot.
It doesn't work for P104 GDDR5X memory.
http://prntscr.com/jahii0
http://prntscr.com/jahii0
BTW, is there any way to deactivate the effect of the "pill" without restarting the PC? Just closing the console doesn't seem to change anything.
This is what i'd like to know as well.
On my EVGA 1080ti FTW3, one of the sensors reaches over 70 degree, I think it stabilized around 73 but then I closed the miner.
Actually they were 2 sensors at the same point but in different sides of the GPU, one sensor for the memory and one for the power, but my guess is that the power-related component is being overheated and causes the memory next to it to heat as well.
The same problem exists with some Neoscrypt and Equihash miners as well, so it's not just ETHlargement, it might be something with all the 1080TIs or just this specific EVGA's edition.
BTW, is there any way to deactivate the effect of the "pill" without restarting the PC? Just closing the console doesn't seem to change anything.
PS: Where are my miners! Your tool works great at increasing the hashrate, thanks! I just hope it doesn't have a trojan in but I'm not keeping anything worth stealing anyway.
Actually they were 2 sensors at the same point but in different sides of the GPU, one sensor for the memory and one for the power, but my guess is that the power-related component is being overheated and causes the memory next to it to heat as well.
The same problem exists with some Neoscrypt and Equihash miners as well, so it's not just ETHlargement, it might be something with all the 1080TIs or just this specific EVGA's edition.
BTW, is there any way to deactivate the effect of the "pill" without restarting the PC? Just closing the console doesn't seem to change anything.
PS: Where are my miners! Your tool works great at increasing the hashrate, thanks! I just hope it doesn't have a trojan in but I'm not keeping anything worth stealing anyway.
1080 +150/800 PL 75 = 37mh/s
Congratulations for the good results! What about 1070/1070Ti? Will there be a new pill available in near future?
Jump to: